Running 27x1” tires on 27x1 1/4” wheels
#2
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 15,411
Bikes: Tarmac Disc Comp Di2 - 2020
Liked 5,018 Times
in
3,452 Posts
Are you saying your wheel inside width is about 32mm wide? Or do you have a wheel that has a 27x1¼ tire on it and mistakenly think that means anything for the question you ask?
Without knowing the inside width of your rim, preferably in millimeters, then we'd really be guessing. Sometimes that is on your wheel rim somewhere or maybe with the model number of your rim and some searching we'd know.
Without knowing the inside width of your rim, preferably in millimeters, then we'd really be guessing. Sometimes that is on your wheel rim somewhere or maybe with the model number of your rim and some searching we'd know.
#3
mmm no im saying the tires i want to throw on these old 27x 1 1/4” rims are slightly more narrow because they are 27x1” tires. The inside rim width is more like 17mm
[Q
UOTE=Iride01;21711349]Are you saying your wheel inside width is about 32mm wide? Or do you have a wheel that has a 27x1¼ tire on it and mistakenly think that means anything for the question you ask?
Without knowing the inside width of your rim, preferably in millimeters, then we'd really be guessing. Sometimes that is on your wheel rim somewhere or maybe with the model number of your rim and some searching we'd know.[/QUOTE]
[Q
UOTE=Iride01;21711349]Are you saying your wheel inside width is about 32mm wide? Or do you have a wheel that has a 27x1¼ tire on it and mistakenly think that means anything for the question you ask?
Without knowing the inside width of your rim, preferably in millimeters, then we'd really be guessing. Sometimes that is on your wheel rim somewhere or maybe with the model number of your rim and some searching we'd know.[/QUOTE]
#4
Really Old Senior Member
I can't imagine any problem.
ASSUMING hooked rims, because you will have to run higher pressure to avoid pinch flats.
Harsher ride.
ASSUMING hooked rims, because you will have to run higher pressure to avoid pinch flats.
Harsher ride.
#5
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,652
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Liked 2,579 Times
in
1,586 Posts
Sure. If they're steel rims without bead hooks, I would be wary of trying to achieve the maximum pressure that a 1" tire would have on its sidewall, but apart from that you should be fine.
#7
It's MY mountain
Join Date: Sep 2006
Location: Mt.Diablo
Posts: 10,012
Bikes: Klein, Merckx, Trek
Liked 3,066 Times
in
1,657 Posts
The only way to know for sure is to put 'em on, and press 'em up until the bead blows off with a load explosion. Then remount with a new tube and use a little less pressure.
#8
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,652
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Liked 2,579 Times
in
1,586 Posts
![lol](images/smilies/lol.gif)
#9
Senior Member
I would be worried of problems if the rim is wider than the tire when mounted, but that is unlikely. As long as the tires are at least as wide as the rims (preferably a bit wider) then you are good to go.