Dropper lever mounting position
#1
Very Slow Rider
Thread Starter
Join Date: Jul 2017
Location: E Wa
Posts: 1,274
Bikes: Jones Plus LWB, 1983 Centurion Japanese CrMo bike
Liked 132 Times
in
101 Posts
Dropper lever mounting position
I got a package deal on a dropper post and lever. It came with the lever pictured. At first I thought it was for road bars, but it fits on mtb dia bars. Unlike my PNW Components Loam lever, this actuates vertically, not side to side. In your opinion, would you mount this type of lever INSIDE or OUTSIDE the left brake lever position? Or quit fussing, pick one and get off the interweb and go ride?
z
z
Likes For 2cam16:
#3
Advanced Slacker
Join Date: Feb 2017
Posts: 6,252
Bikes: Soma Fog Cutter, Surly Wednesday, Canfielld Tilt
Liked 2,571 Times
in
1,451 Posts
I don’t think there is a correct answer, here. Several factors:
How far in do you want the dropper lever?
How far in do you want the brake lever?
How long is the brake lever? Some brakes mount closer to the grips than others for the same lever position.
That said, on both of my mtbs, with the brakes I have, I think I would run that on the outside of the brake.
How far in do you want the dropper lever?
How far in do you want the brake lever?
How long is the brake lever? Some brakes mount closer to the grips than others for the same lever position.
That said, on both of my mtbs, with the brakes I have, I think I would run that on the outside of the brake.
Likes For Kapusta:
Likes For Herzlos:
#5
n00b
Join Date: Jan 2008
Location: Austin, TX
Posts: 1,397
Bikes: Surly Karate Monkey, Twin Six Standard Rando
Liked 466 Times
in
273 Posts
the answer is 100% subjective, so anyone's opinion has no bearing whatsoever on what will work best for you. all that matters is what works for you. experiment and settle on what gives you the most confidence. it's not difficult to reposition a lever like that, so try it one way, than another, and keep moving it until you find the right one.
IME, the vertical lever like that which I tried was never comfortable because I could never find a position that allowed my thumb to actuate it in a way that felt natural. IME, moving that lever around was fruitless. I replaced the one I had with a KS Southpaw, although there are many other "shifter style" levers that might be better. you might find a place that feels right, so give it a try. but if it just never feels right for you, you're not alone.
Likes For mack_turtle:
#6
Very Slow Rider
Thread Starter
Join Date: Jul 2017
Location: E Wa
Posts: 1,274
Bikes: Jones Plus LWB, 1983 Centurion Japanese CrMo bike
Liked 132 Times
in
101 Posts
the answer is 100% subjective, so anyone's opinion has no bearing whatsoever on what will work best for you. all that matters is what works for you. experiment and settle on what gives you the most confidence. it's not difficult to reposition a lever like that, so try it one way, than another, and keep moving it until you find the right one.
IME, the vertical lever like that which I tried was never comfortable because I could never find a position that allowed my thumb to actuate it in a way that felt natural. IME, moving that lever around was fruitless. I replaced the one I had with a KS Southpaw, although there are many other "shifter style" levers that might be better. you might find a place that feels right, so give it a try. but if it just never feels right for you, you're not alone.
#7
Moar cowbell
Join Date: Oct 2004
Location: The 509
Posts: 12,481
Bikes: Bike list is not a resume. Nobody cares.
Likes: 0
Liked 6 Times
in
5 Posts
I opt for inside near the grip, because I use it a lot. Also, I run my brakes for single-finger actuation so there is plenty of room between the grip and the brake perch.
__________________
RST Suspension | Canfield Bikes | 7iDP Protection | Maxxis | Renthal | Hayes | VonZipper Optics | GoPro
Originally Posted by Mark Twain
"Don't argue with stupid people; they will drag you down to their level and then beat you with experience."
Likes For dminor:
#8
Disco Infiltrator
Join Date: May 2013
Location: Folsom CA
Posts: 13,508
Bikes: Stormchaser, Paramount, Tilt, Samba tandem
Liked 2,150 Times
in
1,402 Posts
I’m in the “bin it” camp
__________________
Genesis 49:16-17
Genesis 49:16-17
Likes For Darth Lefty:
#9
Disco Infiltrator
Join Date: May 2013
Location: Folsom CA
Posts: 13,508
Bikes: Stormchaser, Paramount, Tilt, Samba tandem
Liked 2,150 Times
in
1,402 Posts
Since I said "bin it," I realized it's a DVO and therefore cool and also nice even though I don't like the type and now I'm conflicted.
__________________
Genesis 49:16-17
Genesis 49:16-17
#10
Very Slow Rider
Thread Starter
Join Date: Jul 2017
Location: E Wa
Posts: 1,274
Bikes: Jones Plus LWB, 1983 Centurion Japanese CrMo bike
Liked 132 Times
in
101 Posts
I'll try it out when the bike is built up. Worst case, it gets replaced. Switching things around in the cockpit of a MTB isn't the hassle it is on a drop bar bike, especially this day in age of hinged clamps and all. Fun thing to mess around with while drinking beer when the weather is too bad to ride or you're nursing in injury
#11
Advanced Slacker
Join Date: Feb 2017
Posts: 6,252
Bikes: Soma Fog Cutter, Surly Wednesday, Canfielld Tilt
Liked 2,571 Times
in
1,451 Posts
That lever look pretty bling, and I assume it matches the dropper? I'd give it a try for a while. I find I get used to most levers eventually. Brakes are the only ones I am picky about.
#12
Very Slow Rider
Thread Starter
Join Date: Jul 2017
Location: E Wa
Posts: 1,274
Bikes: Jones Plus LWB, 1983 Centurion Japanese CrMo bike
Liked 132 Times
in
101 Posts
Going on a red frame so will look cool, or not, I'll never know. I am red-green colorblind!
Likes For davei1980:
Likes For .joeri.:
#15
Senior Member
Join Date: Oct 2016
Location: San Mateo,Ca.
Posts: 4,034
Bikes: TRIMMED DOWN THE HERD
Liked 1,004 Times
in
628 Posts
2cam16 is that a brand x ascend 2? looks like the lever i have on mine. i’m having trouble getting good cable tension with it...
Likes For 2cam16:
Likes For BigYinz:
#17
Senior Member
Sell it or keep it as a spare and get another Loam Lever or Wolf Tooth (I have both and love them). I use to have that style on a KS dropper and hated it.
#18
Disco Infiltrator
Join Date: May 2013
Location: Folsom CA
Posts: 13,508
Bikes: Stormchaser, Paramount, Tilt, Samba tandem
Liked 2,150 Times
in
1,402 Posts
2cam16 is that a brand x ascend 2? looks like the lever i have on mine. i’m having trouble getting good cable tension with it...
Nothing to do with the probably very nice DVO Garnet
__________________
Genesis 49:16-17
Genesis 49:16-17
Likes For Darth Lefty: