First Ever Ride Clipped In.
#1
Senior Member
Thread Starter
Join Date: Feb 2021
Location: Bay Area
Posts: 75
Bikes: Specialized Aethos
Liked 108 Times
in
41 Posts
First Ever Ride Clipped In.
About a month ago I purchased my first road bike and knew at some point I would want start riding clipped in. After I got my bike I started researching about clipless pedals and ended up going with an SPD style since most everything I heard and read said that would be the easiest to learn with. I then bought a good stiff pair of shoes and installed the cleats, sat on my bike to practice clipping in and out, then road on some grass, and took a couple of short rides. After my practice I went for my first clipped in ride yesterday. What a difference, I felt like my pedaling was much more efficient and controlled. I even felt that I expended less energy on the ride than on previous rides in street shoes. I never thought I would notice such a difference. As I get more comfortable riding clipped in I will increase the tension on pedals. Now I understand what the hype about clipless is. I wish I would have started riding clipless years ago on my mountain bike.
Likes For sjammer:
#2
Junior Member
Great job!! Now, you will, eventually experience the dreaded fall over at a stop sign/light in front of EVERYONE. Anyone that has switched to clipless pedals has done it. Once done, you have become a real cyclist.
Likes For Snotrub:
#3
Senior Member
Thread Starter
Join Date: Feb 2021
Location: Bay Area
Posts: 75
Bikes: Specialized Aethos
Liked 108 Times
in
41 Posts
Almost happened yesterday, but not at a stop sign. I had to stop real quick because of someone stepping out right in front of me. Luckily I was able to unclip and not hit anyone.
Likes For sjammer:
#4
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 8,347
Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Liked 8,516 Times
in
4,026 Posts
You will get to the point pretty quickly where unclipping becomes second nature, and getting your foot down isn't much slower than if your were riding clipless.
__________________
"Swedish fish. They're protein shaped." - livedarklions
"Swedish fish. They're protein shaped." - livedarklions
Likes For Speedway2:
#6
Senior Member
On mountain bikes the prime time for a complete inability to unclip and a big fall is when you a) stall out on a big hill; b)get into slick mud or slippery roots. Enjoy! 😉
#7
Life Feeds On Life
Join Date: Jan 2018
Location: Hondo,Texas
Posts: 2,146
Bikes: Too many Motobecanes
Liked 4,605 Times
in
3,078 Posts
All my bikes are SPD pedals except the fat bike. Once you get use to them you are hooked.
#8
My first time I made it along the sidewalk to my corner and tried to free myself like I was using cleats and toe clips. Wish I had a video of me grabbing the stop sign pole and sliding to the ground letting out an expletive as a father and his young son walked by.
#9
Senior Member
Join Date: Dec 2010
Location: northern Deep South
Posts: 9,006
Bikes: Fuji Touring, Novara Randonee
Liked 2,007 Times
in
1,257 Posts
Check your cleat bolts the end of this week. Most of my three stooges dismounts have occurred because a bolt was loose and I couldn't clip out.
Likes For pdlamb:
#11
Totally forgot that I once lost two of three from one shoe. I couldn’t unclip one foot. Fortunately, there was a bike shop near. I rode to it. Someone held open front door. I skateboarded up to the service area. A mechanic loosened my shoe so I could get my foot out of it. Pried the shoe out of the pedal with a screw driver and replaced the bolts. Most embarrassing.
#12
Happy With My Bikes
Join Date: Sep 2020
Location: Oklahoma
Posts: 2,223
Bikes: Hi-Ten bike boomers, a Trek Domane and some projects
Liked 2,360 Times
in
1,140 Posts
Even though the guy at the LBS tried to talk me out of SPD and into something else that is what I did as well. Turns out I think he was right or it didn't matter or something. I'm not sure. But three years later I still have the SPDs even though I tell myself I'm going to get some "proper", as the guy at the LBS called them, road pedals. And don't worry about the skinned knees that are sure to come at some point, being clipped into clipless pedals is worth it as you have seen.
__________________
"It is the unknown around the corner that turns my wheels." -- Heinz Stücke
"It is the unknown around the corner that turns my wheels." -- Heinz Stücke
#13
Senior Member
#14
Senior Member
Join Date: Dec 2010
Location: northern Deep South
Posts: 9,006
Bikes: Fuji Touring, Novara Randonee
Liked 2,007 Times
in
1,257 Posts
Totally forgot that I once lost two of three from one shoe. I couldn’t unclip one foot. Fortunately, there was a bike shop near. I rode to it. Someone held open front door. I skateboarded up to the service area. A mechanic loosened my shoe so I could get my foot out of it. Pried the shoe out of the pedal with a screw driver and replaced the bolts. Most embarrassing.
Likes For pdlamb:
#15
Life Feeds On Life
Join Date: Jan 2018
Location: Hondo,Texas
Posts: 2,146
Bikes: Too many Motobecanes
Liked 4,605 Times
in
3,078 Posts
#16
Junior Member
Join Date: Nov 2020
Location: SC
Posts: 12
Bikes: CoMotion Carrera, Salsa Warbird, BH Quartz, Santa Cruz Tallboy
Likes: 0
Liked 9 Times
in
5 Posts
Clipless is great. You will get used to it and as everyone has said, you'll come to a spot somewhere when you lean the wrong way and can't get a foot out and fall over. Don't fight it, just hope it's a soft landing.
#17
Broom Wagon Fodder
If you are desperate, the screws that hold in your bottle cages have the same threading as the cleats. I had to fix a woman's shoe during an Alley-Cat I was working. She was able to finish the event.
Years ago I talked a friend into riding clipless the first time on a 65 mile ride. He was very nervous about it and afterwards said he couldn't imagine riding flat pedals again. I almost fell over last week riding too slowly through a deep puddle with floating ice chunks. That was unpleasant.
Years ago I talked a friend into riding clipless the first time on a 65 mile ride. He was very nervous about it and afterwards said he couldn't imagine riding flat pedals again. I almost fell over last week riding too slowly through a deep puddle with floating ice chunks. That was unpleasant.
#18
rebmeM roineS
Join Date: Jan 2006
Location: Metro Indy, IN
Posts: 16,217
Bikes: Bacchetta Giro A20, RANS V-Rex, RANS Screamer
Liked 348 Times
in
227 Posts
Telling yourself that you will eventually fall over because of clipless pedals increases the likelihood that it will happen. Self-fulfilling prophecy.
Doesn't happen to everyone. I've been lucky enough - knock on wood - to have never had a clipless-related fall. Switched to SPD in 1998. Knock on wood.
Doesn't happen to everyone. I've been lucky enough - knock on wood - to have never had a clipless-related fall. Switched to SPD in 1998. Knock on wood.
__________________
Bacchetta Giro A20, RANS V-Rex, RANS Screamer
Bacchetta Giro A20, RANS V-Rex, RANS Screamer
Likes For JanMM:
#19
Junior Member
Join Date: Mar 2021
Location: Amesbury, Massachusetts
Posts: 11
Bikes: 2021 Cannondale Quick 4 hybrid & 2004 Dahon Helios folding bike
Likes: 0
Liked 13 Times
in
7 Posts
Congrats on joining the SPD club, sjammer :-)
I am a rookie who bought cycling shoes and SPD cleats about 10 years ago, and only used them a few times before getting away from cycling for various reasons.
I just clipped into brand new Shimano PD-M324 pedals on my new Cannondale this past Sunday for a 12-mile ride. My speed and efficiency was so noticeably improved that I almost felt like I had upgraded to an electrically assisted hub !
Even though I had practiced disengaging from the pedals about 20 times per side before setting out on the ride, I had two instances of not freeing a foot as I slowed to stop signs, and my mini-epiphany was realizing that to get out of trouble, I only needed to pedal a couple more strokes to gain some momentum and try again at twisting my foot out which I did manage to do.
I am a rookie who bought cycling shoes and SPD cleats about 10 years ago, and only used them a few times before getting away from cycling for various reasons.
I just clipped into brand new Shimano PD-M324 pedals on my new Cannondale this past Sunday for a 12-mile ride. My speed and efficiency was so noticeably improved that I almost felt like I had upgraded to an electrically assisted hub !
Even though I had practiced disengaging from the pedals about 20 times per side before setting out on the ride, I had two instances of not freeing a foot as I slowed to stop signs, and my mini-epiphany was realizing that to get out of trouble, I only needed to pedal a couple more strokes to gain some momentum and try again at twisting my foot out which I did manage to do.
#20
Sr Member on Sr bikes
Technically it’s “clicked” in...not “clipped” in. They’re clipless pedals. Ya can’t clip into something that doesn’t have clips.
Dan
Dan
#21
Senior Member
Join Date: Oct 2017
Location: Chapel Hill NC
Posts: 1,683
Bikes: 2000 Litespeed Vortex Chorus 10, 1995 DeBernardi Cromor S/S
Liked 797 Times
in
446 Posts
Telling yourself that you will eventually fall over because of clipless pedals increases the likelihood that it will happen. Self-fulfilling prophecy.
Doesn't happen to everyone. I've been lucky enough - knock on wood - to have never had a clipless-related fall. Switched to SPD in 1998. Knock on wood.
Doesn't happen to everyone. I've been lucky enough - knock on wood - to have never had a clipless-related fall. Switched to SPD in 1998. Knock on wood.
Likes For Litespud: