TSDZ2 Throttle
#1
Devil's Advocate
Thread Starter
TSDZ2 Throttle
Just installed a TSDZ2 OSF on my newest bike. On the stand, the right half twist throttle seemed to work fine but on the road it has just about no power at all, temperature gauge keeps flashing red even though this model doesn’t come with that sensor (otherwise the throttle wouldn’t even work on the stand because it’s either/or.)
Anyone here get the throttle working under load and if so, what’s the secret?
TIA
Anyone here get the throttle working under load and if so, what’s the secret?
TIA
#2
Senior Member
Join Date: Sep 2006
Location: Kansas
Posts: 2,251
Bikes: This list got too long: several ‘bents, an urban utility e-bike, and a dahon D7 that my daughter has absconded with.
Liked 67 Times
in
49 Posts
I put a throttle on my TSDZ2. However, I had to replace the controller to make it work. Mine was purchased in 2019 and, at the time, the throttle was not a kit option. If you purchased your throttle after you got the kit then that might be the problem. However, if you purchased it with the e kit, then I recommend contacting the vendor.
#3
Devil's Advocate
Thread Starter
I put a throttle on my TSDZ2. However, I had to replace the controller to make it work. Mine was purchased in 2019 and, at the time, the throttle was not a kit option. If you purchased your throttle after you got the kit then that might be the problem. However, if you purchased it with the e kit, then I recommend contacting the vendor.
In the OSF Configurations menu there are entries for ADC Throttle and Throttle, however neither respond to any input and cannot be opened so I’m at a loss.