WTB black nutted/hex nut calipers!
#1
It's the little things
Thread Starter
Join Date: Jan 2016
Location: Chicagoland
Posts: 785
Bikes: Too many, yet not enough
Liked 335 Times
in
151 Posts
WTB black nutted/hex nut calipers!
EDIT: ended up buying nutted dual pivot calipers. Thanks everyone for the wisdom, kindness, and help with the search.
Japanese preferred, but not a requirement. Does not have to be show quality, going on a bike with patina so some digs are ok, rust no though. Black is preferred, short reach ideal 40+ mm would be ideal.
Looking for a complete pair, hardware preferred but not required.
Thanks in advance!
Geoff
Edit: auto correct 😩
Japanese preferred, but not a requirement. Does not have to be show quality, going on a bike with patina so some digs are ok, rust no though. Black is preferred, short reach ideal 40+ mm would be ideal.
Looking for a complete pair, hardware preferred but not required.
Thanks in advance!
Geoff
Edit: auto correct 😩
Last edited by Senrab62; 10-08-21 at 08:12 PM.
#2
Senior Member
Join Date: Oct 2005
Location: SW Ohio
Posts: 3,743
Bikes: Puch Marco Polo, Saint Tropez, Masi Gran Criterium
Liked 471 Times
in
336 Posts
Senrab62 - Tektro may make some nutted rim brake calipers in black that are dual pivot. I'm not up on all of the model numbers for Tektro and also their availability can be spotty. I will try to research it a bit....
#3
It's the little things
Thread Starter
Join Date: Jan 2016
Location: Chicagoland
Posts: 785
Bikes: Too many, yet not enough
Liked 335 Times
in
151 Posts
Senrab62 - Tektro may make some nutted rim brake calipers in black that are dual pivot. I'm not up on all of the model numbers for Tektro and also their availability can be spotty. I will try to research it a bit....
They make a short reach, but they appear to be for the European market.
#4
Full Member
This may not be attractive to you from a price perspective, but I'm in Europe now and am traveling back to the States in a couple weeks. PM me if you want to ship the short reach to me here, and then I can ship them from NYC to wherever you are.
#5
(rhymes with spook)
Join Date: Aug 2009
Location: Winslow, AR
Posts: 2,788
Bikes: '83 univega gran turismo x2, '85 schwinn super le tour,'89 miyata triple cross, '91 GT tequesta, '90 yokota grizzly peak, '94 GT backwoods, '95'ish scott tampico, '98 bonty privateer, '93 mongoose crossway 625, '98 parkpre ariel, 2k'ish giant fcr3
Liked 745 Times
in
546 Posts
#6
Senior Member
TL;DR: Tektro R313 39-52mm dual-pivot calipers in black are available in the US, here's a link to a rear caliper at Ben's. I'll assume they also sell fronts. You'll need to reverse them front/right and kludge the front installation, or buy/find a Tektro front/long nut-mount bolt, which they do sell. :
https://www.benscycle.com/tektro-r31...xoCv8cQAvD_BwE
Tektro long-reach dual-pivot bolt:
https://www.ebay.com/itm/192615640112
So the first thing is you're most likely looking at "short reach/standard" 39-49mm calipers, which will have your shoes relatively high if they need to be at 40-43mm. Not much you can do about that. There were a few caliper sets made with shorter reaches, I remember either a Dia-Compe or Gran-Compe, spec'd on later-'80s Spec'l Allez/others, that had a weird/cool eccentric brak e shoe height adjustment. Seem to remember them being recessed, though, and silver. At any rate, fewer made, likely harder to find.
Then you've got either vintage single-pivot or moderner dual-pivot possibilities. You can usually install the front recessed caliper on the rear, you'll prolly have to use an extra washer or two. If you're looking at vintage single-pivots that are recessed, finding/swapping a recessed/nut-mount bolt for the front isn't that hard. If you're talking dual-pivot, Tektro does sell their nut-mount bolts separately, which will fit Tektro/Shimano and likely others. Again, all you need is the long front bolt. If you haven't swapped dual-pivot bolts yet, the first couple/few times they can be a real pain in the keyster. They get quicker/easier with repetition.
https://www.benscycle.com/tektro-r31...xoCv8cQAvD_BwE
Tektro long-reach dual-pivot bolt:
https://www.ebay.com/itm/192615640112
So the first thing is you're most likely looking at "short reach/standard" 39-49mm calipers, which will have your shoes relatively high if they need to be at 40-43mm. Not much you can do about that. There were a few caliper sets made with shorter reaches, I remember either a Dia-Compe or Gran-Compe, spec'd on later-'80s Spec'l Allez/others, that had a weird/cool eccentric brak e shoe height adjustment. Seem to remember them being recessed, though, and silver. At any rate, fewer made, likely harder to find.
Then you've got either vintage single-pivot or moderner dual-pivot possibilities. You can usually install the front recessed caliper on the rear, you'll prolly have to use an extra washer or two. If you're looking at vintage single-pivots that are recessed, finding/swapping a recessed/nut-mount bolt for the front isn't that hard. If you're talking dual-pivot, Tektro does sell their nut-mount bolts separately, which will fit Tektro/Shimano and likely others. Again, all you need is the long front bolt. If you haven't swapped dual-pivot bolts yet, the first couple/few times they can be a real pain in the keyster. They get quicker/easier with repetition.
__________________
Fuggedaboutit!
Fuggedaboutit!
#7
It's the little things
Thread Starter
Join Date: Jan 2016
Location: Chicagoland
Posts: 785
Bikes: Too many, yet not enough
Liked 335 Times
in
151 Posts
I was going to suggest the Tektros as well—I've got the long reach R559 in black on a vintage tourer, and they're great.
This may not be attractive to you from a price perspective, but I'm in Europe now and am traveling back to the States in a couple weeks. PM me if you want to ship the short reach to me here, and then I can ship them from NYC to wherever you are.
This may not be attractive to you from a price perspective, but I'm in Europe now and am traveling back to the States in a couple weeks. PM me if you want to ship the short reach to me here, and then I can ship them from NYC to wherever you are.
https://www.cyclebasket.com/m9b0s289...d_hex_fitting_
I am not sure if getting them there, and then shipping them would be any cheaper. I have found them for approx $50 US shipped. Not the prettiest, but from a performance aspect they will be superior.
#8
It's the little things
Thread Starter
Join Date: Jan 2016
Location: Chicagoland
Posts: 785
Bikes: Too many, yet not enough
Liked 335 Times
in
151 Posts
#9
It's the little things
Thread Starter
Join Date: Jan 2016
Location: Chicagoland
Posts: 785
Bikes: Too many, yet not enough
Liked 335 Times
in
151 Posts
TL;DR: Tektro R313 39-52mm dual-pivot calipers in black are available in the US, here's a link to a rear caliper at Ben's. I'll assume they also sell fronts. You'll need to reverse them front/right and kludge the front installation, or buy/find a Tektro front/long nut-mount bolt, which they do sell. :
https://www.benscycle.com/tektro-r31...xoCv8cQAvD_BwE
Tektro long-reach dual-pivot bolt:
https://www.ebay.com/itm/192615640112
So the first thing is you're most likely looking at "short reach/standard" 39-49mm calipers, which will have your shoes relatively high if they need to be at 40-43mm. Not much you can do about that. There were a few caliper sets made with shorter reaches, I remember either a Dia-Compe or Gran-Compe, spec'd on later-'80s Spec'l Allez/others, that had a weird/cool eccentric brak e shoe height adjustment. Seem to remember them being recessed, though, and silver. At any rate, fewer made, likely harder to find.
Then you've got either vintage single-pivot or moderner dual-pivot possibilities. You can usually install the front recessed caliper on the rear, you'll prolly have to use an extra washer or two. If you're looking at vintage single-pivots that are recessed, finding/swapping a recessed/nut-mount bolt for the front isn't that hard. If you're talking dual-pivot, Tektro does sell their nut-mount bolts separately, which will fit Tektro/Shimano and likely others. Again, all you need is the long front bolt. If you haven't swapped dual-pivot bolts yet, the first couple/few times they can be a real pain in the keyster. They get quicker/easier with repetition.
https://www.benscycle.com/tektro-r31...xoCv8cQAvD_BwE
Tektro long-reach dual-pivot bolt:
https://www.ebay.com/itm/192615640112
So the first thing is you're most likely looking at "short reach/standard" 39-49mm calipers, which will have your shoes relatively high if they need to be at 40-43mm. Not much you can do about that. There were a few caliper sets made with shorter reaches, I remember either a Dia-Compe or Gran-Compe, spec'd on later-'80s Spec'l Allez/others, that had a weird/cool eccentric brak e shoe height adjustment. Seem to remember them being recessed, though, and silver. At any rate, fewer made, likely harder to find.
Then you've got either vintage single-pivot or moderner dual-pivot possibilities. You can usually install the front recessed caliper on the rear, you'll prolly have to use an extra washer or two. If you're looking at vintage single-pivots that are recessed, finding/swapping a recessed/nut-mount bolt for the front isn't that hard. If you're talking dual-pivot, Tektro does sell their nut-mount bolts separately, which will fit Tektro/Shimano and likely others. Again, all you need is the long front bolt. If you haven't swapped dual-pivot bolts yet, the first couple/few times they can be a real pain in the keyster. They get quicker/easier with repetition.
What makes the bolt swap a pain?
#10
(rhymes with spook)
Join Date: Aug 2009
Location: Winslow, AR
Posts: 2,788
Bikes: '83 univega gran turismo x2, '85 schwinn super le tour,'89 miyata triple cross, '91 GT tequesta, '90 yokota grizzly peak, '94 GT backwoods, '95'ish scott tampico, '98 bonty privateer, '93 mongoose crossway 625, '98 parkpre ariel, 2k'ish giant fcr3
Liked 745 Times
in
546 Posts
ah...well, when you said "nutted/hex nut" i thought you might have meant nutted or allen nut as some folks call allen nuts "hex nuts". see?
#11
It's the little things
Thread Starter
Join Date: Jan 2016
Location: Chicagoland
Posts: 785
Bikes: Too many, yet not enough
Liked 335 Times
in
151 Posts
LOL, I am not sure what the correct term for them is. I usually refer to them as nutted, and the more modern being recessed nut. I am barely able to do basic maintenance on bikes, so I am by no means an expert.
#12
(rhymes with spook)
Join Date: Aug 2009
Location: Winslow, AR
Posts: 2,788
Bikes: '83 univega gran turismo x2, '85 schwinn super le tour,'89 miyata triple cross, '91 GT tequesta, '90 yokota grizzly peak, '94 GT backwoods, '95'ish scott tampico, '98 bonty privateer, '93 mongoose crossway 625, '98 parkpre ariel, 2k'ish giant fcr3
Liked 745 Times
in
546 Posts
if you don't have any luck finding nutted versions of what you're after, you can run a front caliper on the rear. the bolt will be long enough to run a nut on it. and, then run a rear brake on the front. the bolt will be short, but you run a nut up inside the fork crown as opposed to behind it. that's a tip from sheldon brown when he wanted to run recessed brakes on a bike without recessed brake mounts
#13
Full Member
Join Date: Apr 2021
Location: South Louisiana
Posts: 407
Bikes: '71 Raleigh Inter, '98 Tommasini, '83 Trek 500, 83 Trek 720 '
Liked 227 Times
in
122 Posts
I have some Weinmann type 500 calipers in black they are tiny brakes so i would call them short reach.. PM me if they are of interest..
#14
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 7,561
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Liked 3,590 Times
in
2,254 Posts
These have one nutted, one non nutted...You can probably find a nut to go as a substitute for the hex recessed nut...
https://www.ebay.com/itm/18487590494...oAAOSwDz9gvmg-
And completely nutted...
https://www.ebay.com/itm/25516352189...wAAOSw3Y1hWz3y
https://www.ebay.com/itm/18487590494...oAAOSwDz9gvmg-
And completely nutted...
https://www.ebay.com/itm/25516352189...wAAOSw3Y1hWz3y
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
#15
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 7,561
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Liked 3,590 Times
in
2,254 Posts
And for only 100 cabbage leaves... https://www.ebay.com/itm/26515831927...IAAOSwZe5gnI0~
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
#16
verktyg
Senrab62
Geoff,
Short reach brakes became the fashion in the 80's as 18mm - 20mm tires became De rigueur for "racing" road bikes. About the same time most brake calipers were shifting from nutted to recessed mounting.
As you already know, black, nutted short reach calipers are scarce as:
Thought that I had a solution for you, Dia-Compe Aero Gran Compe in black with a 37mm - 42mm reach. No joy! when I pulled them out, they have recessed mounts.
These are going on the block soon as I have no need for them. Anyone interested, PM me please.
verktyg
Geoff,
Short reach brakes became the fashion in the 80's as 18mm - 20mm tires became De rigueur for "racing" road bikes. About the same time most brake calipers were shifting from nutted to recessed mounting.
As you already know, black, nutted short reach calipers are scarce as:
Thought that I had a solution for you, Dia-Compe Aero Gran Compe in black with a 37mm - 42mm reach. No joy! when I pulled them out, they have recessed mounts.
These are going on the block soon as I have no need for them. Anyone interested, PM me please.
verktyg
__________________
Don't believe everything you think! History is written by those who weren't there....
Chas. ;-)
Don't believe everything you think! History is written by those who weren't there....
Chas. ;-)
#17
(rhymes with spook)
Join Date: Aug 2009
Location: Winslow, AR
Posts: 2,788
Bikes: '83 univega gran turismo x2, '85 schwinn super le tour,'89 miyata triple cross, '91 GT tequesta, '90 yokota grizzly peak, '94 GT backwoods, '95'ish scott tampico, '98 bonty privateer, '93 mongoose crossway 625, '98 parkpre ariel, 2k'ish giant fcr3
Liked 745 Times
in
546 Posts
Senrab62
Thought that I had a solution for you, Dia-Compe Aero Gran Compe in black with a 37mm - 42mm reach. No joy! when I pulled them out, they have recessed mounts.
verktyg
Thought that I had a solution for you, Dia-Compe Aero Gran Compe in black with a 37mm - 42mm reach. No joy! when I pulled them out, they have recessed mounts.
verktyg
#18
Senior Member
Not sure if I was clear, and I'm sleepy, but the bolt swap is a pain for dual-pivot calipers. It's not the simple "remove two nuts, unspring and extract" procedure from single pivots. Tiny setscrew underneath threaded bushing at rear, longer threaded pivot bolt to extract, and when you remove the pivot bolt the calipers go all limp and cattywampus on you. More internal crap to clean/lube, because there are more pivots, and reassembly/readjustment takes more time and effort. At least for me, though having almost 50yrs on single pivots means I have more autopilot ability there.
Yes, I considered the bolts. And the front on back, and change bolt option as well. Not a lot of vintage black short reach nutted that I am able to find. I have seen some dia compe G/N500 that I could probably file slots to get reach right, but I have read that they do not offer the best performance, and are a pain to set up.
What makes the bolt swap a pain?
What makes the bolt swap a pain?
__________________
Fuggedaboutit!
Fuggedaboutit!
#19
verktyg
Bolt Swap - Recessed To Nutted
Not sure if I was clear, and I'm sleepy, but the bolt swap is a pain for dual-pivot calipers. It's not the simple "remove two nuts, unspring and extract" procedure from single pivots. Tiny setscrew underneath threaded bushing at rear, longer threaded pivot bolt to extract, and when you remove the pivot bolt the calipers go all limp and cattywampus on you. More internal crap to clean/lube, because there are more pivots, and reassembly/readjustment takes more time and effort. At least for me, though having almost 50yrs on single pivots means I have more autopilot ability there.
I had an NOS set of IRD/Tektro recessed mount dual pivot brakes sitting around. I gave my doctor one of my classic touring bikes that had old Mafac brakes. I wanted to make sure that he had some good stopping dual pivot brakes.
The front brake fit on the rear using a hex nut with out any problem.
I got a 76mm Tektro pivot bolt online to convert the original recessed mount rear caliper to hex nut to use on the front.
The fasteners were all Loctited from the factory. It was a 3 handed job! Tighten, check, loosen, tighten, check, loosen to get it adjusted properly...
Rear caliper before surgery
Per PCB's description - the original rear pivot bolt is at the top left with the 76mm replacement for a nutted front below it.
Finished job
Finding the right parts can be a chore as there were so many variations with very little documentation. Note the package label says 76mm Front Recessed Center Bolt. It's actually a nutted Center Bolt!
verktyg
__________________
Don't believe everything you think! History is written by those who weren't there....
Chas. ;-)
Don't believe everything you think! History is written by those who weren't there....
Chas. ;-)
Last edited by verktyg; 10-08-21 at 03:25 AM.
Likes For verktyg: