Best Value Square Taper Bottom Bracket in 2022?
#1
Constant tinkerer
Thread Starter
Best Value Square Taper Bottom Bracket in 2022?
My go-to used to be the Shimano UN55 which I've had good luck with. But it's apparently discontinued and replaced by the dirt cheap UN300. For ~$15 I can't imagine that one is very good...
Other options? I'm not looking to spend a fortune (SKF), I just want something decent that will hold up. I've been burned by cheap options in the past (can't remember brands) that only lasted a year or less before failing.
I typically use 103, 107, and 110mm lengths.
Other options? I'm not looking to spend a fortune (SKF), I just want something decent that will hold up. I've been burned by cheap options in the past (can't remember brands) that only lasted a year or less before failing.
I typically use 103, 107, and 110mm lengths.
#2
Tange. Well made, good variety of sizes, often under $20.
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
Likes For rccardr:
#3
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 10,056
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Liked 3,055 Times
in
1,647 Posts
I have a un300, not lots of miles on it but it seemed solid and well made, with aluminum cups, not plastic. Sure feels like as step up from from un26
__________________
Life is too short not to ride the best bike you have, as much as you can.
Life is too short not to ride the best bike you have, as much as you can.
#4
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 15,417
Bikes: Tarmac Disc Comp Di2 - 2020
Liked 5,021 Times
in
3,455 Posts
Don't imagine. Just get the UN-300 and find out. If it doesn't last, then it was only a few bucks you lost and you can say nanny-nanny-boo-boo to the rest of us that just speculate.
Likes For Iride01:
#5
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,202
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Liked 4,008 Times
in
2,384 Posts
I read the subject line and the first thing I think of is "the BB that you can actually get and also fits". This said after the worst two years of product availability. Andy
__________________
AndrewRStewart
AndrewRStewart
Likes For Andrew R Stewart:
#6
Method to My Madness
Join Date: Nov 2020
Location: Orange County, California
Posts: 3,902
Bikes: Trek FX 2, Cannondale Synapse x2, Cannondale CAAD4, Santa Cruz Stigmata 3
Liked 1,576 Times
in
1,091 Posts
Yes, Tange Seiki. But $30. Inflation, you know.
Tange LN-3922 Square Taper Bottom Bracket The Bikesmiths
Tange LN-3922 Bottom Bracket | - Ben's Cycle (benscycle.com)
Tange LN-3922 Square Taper Bottom Bracket The Bikesmiths
Tange LN-3922 Bottom Bracket | - Ben's Cycle (benscycle.com)
#7
Method to My Madness
Join Date: Nov 2020
Location: Orange County, California
Posts: 3,902
Bikes: Trek FX 2, Cannondale Synapse x2, Cannondale CAAD4, Santa Cruz Stigmata 3
Liked 1,576 Times
in
1,091 Posts
Yes, Tange Seiki. But $30. Inflation, you know.
Not too hard to find:
Tange LN-3922 Square Taper Bottom Bracket The Bikesmiths
Tange LN-3922 Bottom Bracket | - Ben's Cycle (benscycle.com)
Tange LN-3922 Square Taper Bottom Bracket The Bikesmiths
Tange LN-3922 Bottom Bracket | - Ben's Cycle (benscycle.com)
#8
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,572
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Liked 3,428 Times
in
2,076 Posts
Depending on what length you need there are still UN 55 floating around and on Ebay.
https://www.universalcycles.com/shop...s.php?id=44899
https://www.universalcycles.com/shop...s.php?id=44899
#9
Guest
I recently bought a Velo Orange BB that does the trick nicely.
#10
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 14,089
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Liked 4,281 Times
in
2,856 Posts
SKF makes a great B.B. I know what you are thinking but it is a quality part made by one of the largest bearing manufacturers and will last a long long long time. That being said the IRD Defiant is another I like and the QB-55 looks to be a good cheap-o type one, they are made by Tange so of good quality.
#11
That Tange BB from Bikesmiths is on eBay for $19.70.
Shipped.
Shipped.
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
#12
Senior Member
Join Date: Dec 2010
Location: northern Deep South
Posts: 9,006
Bikes: Fuji Touring, Novara Randonee
Liked 2,010 Times
in
1,257 Posts
SKF makes a great B.B. I know what you are thinking but it is a quality part made by one of the largest bearing manufacturers and will last a long long long time. That being said the IRD Defiant is another I like and the QB-55 looks to be a good cheap-o type one, they are made by Tange so of good quality.
Reason I ask is I bought into the advertising copy just after the bottom brackets on two of my bikes went out. So I've had a pair of SKFs in my stock for the next time a BB wears out, but the cheap Shimano stuff has lasted about a dozen years now. Not sure if I'm disappointed or relieved!
#14
Senior Member
The un300 bb is actually fairly decent in my opinion and as nice as the un55. As someone mentioned, it has aluminum cups, it's a cartridge bearing on each side and seems built like the tange. I just wish there was something decent between the tange and un300 and an skf or Phil. Something like the old ultegra/xt level. Building a bike for my daughter and really end up having to use an origin8 to get a decent q-factor, the 41t 1x she should have and still fit a 142 rear end. Just don't want to go that much over 100 for a square taper.
#15
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 14,089
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Liked 4,281 Times
in
2,856 Posts
I've seen some pretty brutal reviews of the SKF BBs. Did you have any problems installing and torqueing yours?
Reason I ask is I bought into the advertising copy just after the bottom brackets on two of my bikes went out. So I've had a pair of SKFs in my stock for the next time a BB wears out, but the cheap Shimano stuff has lasted about a dozen years now. Not sure if I'm disappointed or relieved!
Reason I ask is I bought into the advertising copy just after the bottom brackets on two of my bikes went out. So I've had a pair of SKFs in my stock for the next time a BB wears out, but the cheap Shimano stuff has lasted about a dozen years now. Not sure if I'm disappointed or relieved!
#16
I like the Interloc Racing Design (IRD) QB-55, QB-75, and QB-95.
They are all nice quality stuff made by Tange Seiki. QB-55 comes standard with steel cups; QB-75 with aluminum.
They sell cups and spacers separately, and you have to go that way to get French, Italian, or Swiss configurations. They even recommend that, if you're going that way, you shouldn't buy the QB-75; just get the QB-55, because you'll be swapping the cups anyway.
Although I have not done the job myself, I have read that the bearing cartridges on those IRD units can be replaced.
They are all nice quality stuff made by Tange Seiki. QB-55 comes standard with steel cups; QB-75 with aluminum.
They sell cups and spacers separately, and you have to go that way to get French, Italian, or Swiss configurations. They even recommend that, if you're going that way, you shouldn't buy the QB-75; just get the QB-55, because you'll be swapping the cups anyway.
Although I have not done the job myself, I have read that the bearing cartridges on those IRD units can be replaced.
Likes For John Valuk:
Likes For John Valuk:
#18
Typically ~$80, sometimes available for less.
At them moment, as with many things, availability can be a challenge. I bought a QB-55 a while back directly from the IRD web store, which meant a slightly higher price, and no special deals on shipping - but they had it on hand, so problem solved.
#19
Senior Member
That's where I mentally put the IRD QB-95.
Typically ~$80, sometimes available for less.
At them moment, as with many things, availability can be a challenge. I bought a QB-55 a while back directly from the IRD web store, which meant a slightly higher price, and no special deals on shipping - but they had it on hand, so problem solved.
Typically ~$80, sometimes available for less.
At them moment, as with many things, availability can be a challenge. I bought a QB-55 a while back directly from the IRD web store, which meant a slightly higher price, and no special deals on shipping - but they had it on hand, so problem solved.
#20
Keefusb
I fixed up an old Fuji mountain bike for a friend and picked up a Sunlite SL-26 BB on Amazon for like $15. It was all steel, including the cups. A bit on the heavy side, but very smooth and solid. I would buy another one if I needed to replace a square taper BB.
#21
The Wheezing Geezer
Join Date: Oct 2021
Location: Espaņola, NM
Posts: 1,147
Bikes: 1976 Fredo Speciale, Rivendell Clem Smith Jr., Libertas mixte
Liked 1,035 Times
in
491 Posts
The Phil Wood bottom bracket that I chose for my frame 45 years ago still feels like new. I assumed it would be way more than $165 now, but that's the price. And they are available!
I consider it a great VALUE, despite the current price. You will never need to fiddle with it, ever. Not what you were looking for, I know. But something to keep in mind.
I consider it a great VALUE, despite the current price. You will never need to fiddle with it, ever. Not what you were looking for, I know. But something to keep in mind.
#22
Anything with a non-steel cup is a no buy in my oppinion. I buy Sunrace sealed cartridge BBs which is one of the few that still have steel cups.
https://www.sunrace.com/en/products/detail/bbs15-bbs16
https://www.sunrace.com/en/products/detail/bbs15-bbs16
#23
Keefusb
As long as a bit of extra weight and the lack of brand cache' are not major concerns, I could buy 10+ Sunlite/Sunrace BB's for the price of one PW BB. I do appreciate the longevity of a premium moving part, like my 25 year old Chris King headset that I have had to clean and grease only one time, but I don't see the point of paying so much for a square taper BB.
#24
PBP Ancien (2007)
Join Date: Jan 2020
Location: South Wales, UK
Posts: 358
Bikes: Cannondale CAADX (for commuting), Cannondale CAAD12, Cannondale CAAD12 Team CNCPT, Giant Contend 2
Liked 156 Times
in
106 Posts
Just installed a Shimano BB-UN300 this afternoon onto a bike I'm building up and I'm very impressed with it although the left hand cup was a bit hard to fit. With a crankset on it spins like crazy and actually better than any external BB I've had.
#25
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 13,060
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Liked 4,088 Times
in
2,643 Posts
For me, Q-factor is a bigger issue than cost. (Knee replacements being a little more expensive than even the most expensive BBs). I don't do Shimano if I can possibly avoid it because every one I have seen is symmetrical, ie the same length the the non-drive side as the drive side. I know this makes me look like an old fart, but I took it for granted that BBs were asymmetrical, cranks were straight and left cranks came close to left chainstays. Right cranks about a cm further out. Seemed this was the norm for Sugino and others in the '70s and '80s. Does me good to hear that some of the most expensive new stuff is now talking low Q-factor. Now if we can just get that to trickle down a little faster!