Decoding of Eddy Merckx frames
#676
Hello Jacek,
as discussed, attaching photos. The paint is, as you can see, not original so the frame for sure will be going for repaint. The paint (or is it plastification) is quite thick but I have managed to get a shot at BB to discern numbers and letters. The bottom bracket reads: L0WW D3848.
So this seems to fit into "WW - Strada: ~ D --- ?" criteria, awaiting your expert opinion.
Regards,
Nenad
as discussed, attaching photos. The paint is, as you can see, not original so the frame for sure will be going for repaint. The paint (or is it plastification) is quite thick but I have managed to get a shot at BB to discern numbers and letters. The bottom bracket reads: L0WW D3848.
So this seems to fit into "WW - Strada: ~ D --- ?" criteria, awaiting your expert opinion.
Regards,
Nenad
#679
Member
Hello all and Jacek, hope you all in great state!
Wanna ask about my friend's merckx he just bought, its mx leader with F3674 on the right side of BB and probably a letter M on the left. Paintjob is green. Is it produced in 95?
thanks in advance!
Wanna ask about my friend's merckx he just bought, its mx leader with F3674 on the right side of BB and probably a letter M on the left. Paintjob is green. Is it produced in 95?
thanks in advance!
Likes For messy11:
#681
Member
#684
Full Member
Join Date: Aug 2007
Location: Northern AZ
Posts: 217
Bikes: '80 Medici Tourismo, '82 Merckx, '85 Peugeot PSN10, '86 Ironman, '89 Trek 520, '96 Steelman, '96 Torelli CX, '97 Friday Two'sDay, '02 CoMo Speedster, '09 Giant Reign, '10 Canfield, '13 Turner DHR, '16 Chase BMX
Liked 257 Times
in
51 Posts
Hello, I can't believe I am now part of the Merckx ownership family. This is my new bike and I haven't seen this paint scheme anywhere and have no idea of the frames age or model name. I got this from a friend who bought the frame/fork from a mobile bike shop guy in Wisconsin. After you would pick out the frame you want, you would pick out the parts you wanted on it and he would build it for you. His name was Buzz. I tried to read thru some of the stuff but just got more confused, can anyone help me with what I have? It has Campy dropouts if that matters
BB shell C 1. E 4699
Just took it out of my truck.....
Seat cluster
Headtube
BB shell C 1. E 4699
Just took it out of my truck.....
Seat cluster
Headtube
#685
This is a 1982 Professional, Columbus SL tubes.
The frame appears to have been painted out of EMC.
The C designation is a mistake (should be G), 1 is the frame size (51 c-c).
The frame appears to have been painted out of EMC.
The C designation is a mistake (should be G), 1 is the frame size (51 c-c).
#686
Full Member
Join Date: Aug 2007
Location: Northern AZ
Posts: 217
Bikes: '80 Medici Tourismo, '82 Merckx, '85 Peugeot PSN10, '86 Ironman, '89 Trek 520, '96 Steelman, '96 Torelli CX, '97 Friday Two'sDay, '02 CoMo Speedster, '09 Giant Reign, '10 Canfield, '13 Turner DHR, '16 Chase BMX
Liked 257 Times
in
51 Posts
What does the C mean and why should it be a G? Either way, I can't wait to ride it!
#687
If the guy confused C and G he could also have confused 1 and 3 (although this is much more difficult)
The C stood first for the Columbus tubes in the noCorsa model, and then simply for the Corsa model - it didn't appear until 1984, while it happens by mistake in the E46xx-47xx region.
The C stood first for the Columbus tubes in the noCorsa model, and then simply for the Corsa model - it didn't appear until 1984, while it happens by mistake in the E46xx-47xx region.
Likes For CyclesMakaron:
#688
Member
I see..
ah thank you! Quite odd to find english thread in merckx frame.
I also have other frame that I wanna know the identity, the owner said its Corsa with Z 1495 and probably L on the left side. Is it corsa? Columbus SL?
I also have other frame that I wanna know the identity, the owner said its Corsa with Z 1495 and probably L on the left side. Is it corsa? Columbus SL?
Last edited by messy11; 03-23-22 at 05:52 AM.
#690
Member
#692
Junior Member
Need help with an older Merckx frame!
Again, I come for help figuring out the numbers on a Merckx frame, and I think this one is fairly old, from the looks of it:
On the left is just the number 2
On the right is E 9534
Any help with this frame would be greatly appreciated!!
On the left is just the number 2
On the right is E 9534
Any help with this frame would be greatly appreciated!!
#694
Junior Member
#696
Junior Member
Join Date: Oct 2020
Location: Sydney, Australia
Posts: 117
Bikes: Wilier Cento10Ndr, Giant Anthem 2, 1985 Gefsco, 1979 Gios Torino Super Record, 1983 Peugeot PFN10, Terry Dolan built Reynolds 753 Cougar for Malcolm Elliott
Liked 33 Times
in
18 Posts
A O R. E4225 60cm Professional Reynolds 531
I’m assuming that this is a repaint ( were there custom painted frames back in the 80s??).
Reynolds tubing stacks up with BB R stamp but 4225 doesn’t work size wise as a 60c-c. I take it that these serial numbers are not fooplroof??
What definitive year would this be from?
Great thread, thanks for the ground work to get this up and published!
Reynolds tubing stacks up with BB R stamp but 4225 doesn’t work size wise as a 60c-c. I take it that these serial numbers are not fooplroof??
What definitive year would this be from?
Great thread, thanks for the ground work to get this up and published!
Likes For CyclesMakaron:
#698
Junior Member
Join Date: Oct 2020
Location: Sydney, Australia
Posts: 117
Bikes: Wilier Cento10Ndr, Giant Anthem 2, 1985 Gefsco, 1979 Gios Torino Super Record, 1983 Peugeot PFN10, Terry Dolan built Reynolds 753 Cougar for Malcolm Elliott
Liked 33 Times
in
18 Posts
Thanks CyclesMakaron that’s the info I needed. Didn’t even think that the O was in fact a 0 denoting the 60cm frame size.
Great work, much appreciated.
Great work, much appreciated.
#699
Junior Member
Join Date: Oct 2020
Location: Sydney, Australia
Posts: 117
Bikes: Wilier Cento10Ndr, Giant Anthem 2, 1985 Gefsco, 1979 Gios Torino Super Record, 1983 Peugeot PFN10, Terry Dolan built Reynolds 753 Cougar for Malcolm Elliott
Liked 33 Times
in
18 Posts
My only other query with regards to this frame is when we’re the sloping forks released for the Professional? With 1982 as a build year would these forks have been to early for the frame? The decals would need to be changed to reflect its age also I’m assuming. Thanks.
#700
Slope fork crown - OK for 1982
Can you check the card / markings on the fork steering tube ?
The best sets of stickers for early EMC are sold by Cyclomondo - coincidentally from Australia
Can you check the card / markings on the fork steering tube ?
The best sets of stickers for early EMC are sold by Cyclomondo - coincidentally from Australia
Likes For CyclesMakaron: