Storing Different Sized Girls/Women's Bikes & Trailer
#1
Storing Different Sized Girls/Women's Bikes & Trailer
I'm trying to find a way to conveniently store (hanging from a wall or ceiling) a little girls hybrid bike, a teenage girls road bike with 700 wheels, an adult woman's folding bike, my Long Haul Trucker with 700 wheels, and a Burley Bee bike trailer. The women's bikes all lack cross bars which is limiting storage options. Is the best way just to buy some giant hooks and mount to the wall? Do pulley systems like this work well https://www.containerstore.com/s/gar...E&gclsrc=aw.ds ?
#2
Bike-train
I have my wife's bike hanging on a hook on the side of the garage, back tire on ground, front tire in hook. I have/am using the ceiling mount systems, they work good. Just be careful of the hook ends, they can get bent and drop your bike. I currently have my tandem hung from a ceiling mount system that I took the hook ends off, put eye hooks instead; then uses a plastic coated cable and carabiners to hold the bike.
Likes For NRissy:
#3
I have my wife's bike hanging on a hook on the side of the garage, back tire on ground, front tire in hook. I have/am using the ceiling mount systems, they work good. Just be careful of the hook ends, they can get bent and drop your bike. I currently have my tandem hung from a ceiling mount system that I took the hook ends off, put eye hooks instead; then uses a plastic coated cable and carabiners to hold the bike.
#4
Bike-train
I just bought a cheap one from a store called menards (Midwest lowes or home depot). I didn;t use the cheap short screws that came with it; I replaced those with 3 inch torx screws that I made sure went into studs.
#5
#6
Deraill this!
Join Date: Jun 2019
Location: CMH is close
Posts: 810
Bikes: 18 Cdale Quick 1, 16 Cdale Synapse 105, 88 Cdale M500, and a few others
Liked 639 Times
in
341 Posts
I've used the ceiling hangers for my daughter's bikes which are small and light and my 90's Hardrock Ultra because it an indestructible beast but resist hanging my wife's Verve 3 or my Quick 1. I also used longer screws to mount the assemblies and appreciate the carabiner suggestions. I'm hoping my next garage has more usable space around the parameter.