Are waterproof bike covers necessary?
#1
Junior Member
Thread Starter
Are waterproof bike covers necessary?
I picked up one for $30. Is there another way to protect bike from rusting. Bolts, pedals etc? Is a bike cover even necessary?? I use it for commuting but store it in my garage when at home.
#2
Senior Member
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,374
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 2483 Post(s)
Liked 2,955 Times
in
1,678 Posts
Waterproof bike covers promote condensation, which increases the rate of rust formation. Best to use such a cover only to protect the bike from rain and then remove the cover when the rain stops.
Likes For Trakhak:
#3
Senior Member
I have a tarp over my family's bikes, but the bottom is generally open for air to pass through. Do you think that helps avoid condensation/rust?
#4
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,906
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 4806 Post(s)
Liked 3,929 Times
in
2,554 Posts
I've had (and have) city bikes where I use lubricants for their ability in the wet, chose parts accordingly and paint the bikes with appropriate paints. 2-part brushed epoxy, powdercoat. Marine grease aka boat trailer hub grease in bearings (lots!) and all threads (and on any metal having water issues). Finishline wet lube for the chain. Seats with plastic covers and/or a produce bag to put over them when I park the bike. The only things those bikes don't really like is going into puddles deeper than the bearings and even then, with enough marine grease stuffed in, many bearing do fine.
#5
Disco Infiltrator
Join Date: May 2013
Location: Folsom CA
Posts: 13,446
Bikes: Stormchaser, Paramount, Tilt, Samba tandem
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 3126 Post(s)
Liked 2,105 Times
in
1,369 Posts
You can buy your way out of it somewhat. Pricier bike components are usually anodized, stainless, or nickel plated, or at worst chrome plated and powder coated. Cheaper ones might be black oxide coated or galvanized. Better components also have better ball bearing seals, especially for MTB parts. On the other hand leather saddles and grips and luggage are more susceptible than plastic. Waterproof luggage is made from waterproof fabric, but if it's leather or heavy fabric like a book bag it needs wax.
Kind of depends on the water too. Coastal areas are going to get salty corrosive moisture
Kind of depends on the water too. Coastal areas are going to get salty corrosive moisture
__________________
Genesis 49:16-17
Genesis 49:16-17
Last edited by Darth Lefty; 06-11-22 at 11:45 PM.