1989 Pinarello Montello Cromovelato
#1
Full Member
Thread Starter
Join Date: Oct 2021
Location: San Antonio, Texas
Posts: 402
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 128 Post(s)
Liked 437 Times
in
176 Posts
1989 Pinarello Montello Cromovelato
Here’s another bike I bought about 10 years ago. Originally, it was a full Dura Ace 7400 group bike. Since at the time, all my bike were either Dura Ace or Superbe Pro, i decide I wanted something Italian and thought this would be the perfect frame for that. I started and almost finished building it up with 8 speed Campy but work and life got in the way, along with other bikes with competing priorities and long story short, I am thinking to build it up with a spare Athena 11 speed group I happen to have collected. One of my main concerns is the fragility of the paint. These cromovelato paint jobs and applied decals are known to be very fragile, some would say they start to flake if you even look crosseyed at them! Anyway, mine is in better than average condition and has the rare matching stem and seatpost but I still have concerns that if I start putting miles on it, the paint will take a beating and begin failing. My question is, do you think I could have a clear coat sprayed on it to seal it in as it stand now? I was thinking maybe covering with PPF, paint protection film but I think for sure it will be a permanent fixture as it will surely remove the paint should I try to remove it.
The head tube decal had a pretty good nick so I carefully removed it and have a new one to replace it with. I took some photos of it today in the bright sunlight and it you’ll notice on some of the photos you can see how the tinted clear coat has developed a patina that resembles fine crazing. I’m not sure if that is the beginning of paint failure but my understanding from talking to other more familiar with the paint is that there is some shrinking of the paint as it ages.
Its not the flashiest of paint jobs as far as Pinarello go but it is unique and I’d like to keep it if at all possible.
The head tube decal had a pretty good nick so I carefully removed it and have a new one to replace it with. I took some photos of it today in the bright sunlight and it you’ll notice on some of the photos you can see how the tinted clear coat has developed a patina that resembles fine crazing. I’m not sure if that is the beginning of paint failure but my understanding from talking to other more familiar with the paint is that there is some shrinking of the paint as it ages.
Its not the flashiest of paint jobs as far as Pinarello go but it is unique and I’d like to keep it if at all possible.
Likes For BMC_Kid:
#2
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 7,083
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2530 Post(s)
Liked 3,350 Times
in
2,100 Posts
That’s plenty flashy. Great paint job...!
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
Likes For BMC_Kid:
#5
Senior Member
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,998
Bikes: old ones
Mentioned: 305 Post(s)
Tagged: 0 Thread(s)
Quoted: 26481 Post(s)
Liked 10,448 Times
in
7,248 Posts
.
...a lot of chromovelato finishes were done with a transparent or translucent lacquer as the final paint layer. I have absolutley no knowledge of what yours is painted with, and would hesitate wo guess. But that is the main contributor to their fragility. With an enamel clear coat, or even another lacquer clear coat, there's a real risk of bubbling the paint that's already on there. But the 2 part urethane clear glamor paint sold in spray cans under the Spraymax brand name seems to go on without issues over everything I've applied it to. And it is very durable.
Having said that. I think I'd still try it first on something like the fork, which if you have to sand off and refinish it, is easier than redoing the whole frame. The stuff has a limited pot life in the can, once mixed. But it still gives you enough time to try it on the fork as a test, and then go on to paint the rest of the frame, if nothing bad happens with your test.
...a lot of chromovelato finishes were done with a transparent or translucent lacquer as the final paint layer. I have absolutley no knowledge of what yours is painted with, and would hesitate wo guess. But that is the main contributor to their fragility. With an enamel clear coat, or even another lacquer clear coat, there's a real risk of bubbling the paint that's already on there. But the 2 part urethane clear glamor paint sold in spray cans under the Spraymax brand name seems to go on without issues over everything I've applied it to. And it is very durable.
Having said that. I think I'd still try it first on something like the fork, which if you have to sand off and refinish it, is easier than redoing the whole frame. The stuff has a limited pot life in the can, once mixed. But it still gives you enough time to try it on the fork as a test, and then go on to paint the rest of the frame, if nothing bad happens with your test.
#6
Full Member
Thread Starter
Join Date: Oct 2021
Location: San Antonio, Texas
Posts: 402
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 128 Post(s)
Liked 437 Times
in
176 Posts
.
...a lot of chromovelato finishes were done with a transparent or translucent lacquer as the final paint layer. I have absolutley no knowledge of what yours is painted with, and would hesitate wo guess. But that is the main contributor to their fragility. With an enamel clear coat, or even another lacquer clear coat, there's a real risk of bubbling the paint that's already on there. But the 2 part urethane clear glamor paint sold in spray cans under the Spraymax brand name seems to go on without issues over everything I've applied it to. And it is very durable.
Having said that. I think I'd still try it first on something like the fork, which if you have to sand off and refinish it, is easier than redoing the whole frame. The stuff has a limited pot life in the can, once mixed. But it still gives you enough time to try it on the fork as a test, and then go on to paint the rest of the frame, if nothing bad happens with your test.
...a lot of chromovelato finishes were done with a transparent or translucent lacquer as the final paint layer. I have absolutley no knowledge of what yours is painted with, and would hesitate wo guess. But that is the main contributor to their fragility. With an enamel clear coat, or even another lacquer clear coat, there's a real risk of bubbling the paint that's already on there. But the 2 part urethane clear glamor paint sold in spray cans under the Spraymax brand name seems to go on without issues over everything I've applied it to. And it is very durable.
Having said that. I think I'd still try it first on something like the fork, which if you have to sand off and refinish it, is easier than redoing the whole frame. The stuff has a limited pot life in the can, once mixed. But it still gives you enough time to try it on the fork as a test, and then go on to paint the rest of the frame, if nothing bad happens with your test.
Here's a good video on cromovelato paint...
#7
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,608
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 74 Post(s)
Tagged: 0 Thread(s)
Quoted: 1624 Post(s)
Liked 2,245 Times
in
1,118 Posts
Keeping the quality of the finish is a challenge. I don't have an answer but can empathize with your situation.
The Montello purchased in 2014 was challenged to begin with. The decals were gone and left a ghost.
1989 Pinarello Monetllo on Flickr
After 3-4000 miles of commuting and always storing it in the garage at home or a shelter at work, the paint deteriorated to the point of it rubbing off with your finger. This was on the top side of the frame. .
P1050224 on Flickr
I didn't really like the paint scheme that much but it is a Pinarello Montello and on the bucket list without specs! This one has a translucent like pearl topcoat that failed. Best seen here.
P1020178 on Flickr
It has since turned grey or dark as shown without changing with cleaner or wax.
P1010730 on Flickr.
P1010733 on Flickr
Since it is fading and looks really bad, I used 000 steel wool to clean it up, some times 0000. I actually like the colors under the topcoat. The challenge is not to go through the color either on the tubes and more challenging, the around the lugs.
It is a work in process at the moment.
The point is that I don't know what to do other than accept the degradation over time. It is my go-to bike at the moment because I am out of shape and need that small ring on the triple once in awhile. My preference would be to ride the De Rosa, which is chip challenged!
PXL_20220301_124340872 on Flickr
I strongly doubt I will ever sell it so I can mess it up all I want!
P1050226 on Flickr
The Montello purchased in 2014 was challenged to begin with. The decals were gone and left a ghost.
1989 Pinarello Monetllo on Flickr
After 3-4000 miles of commuting and always storing it in the garage at home or a shelter at work, the paint deteriorated to the point of it rubbing off with your finger. This was on the top side of the frame. .
P1050224 on Flickr
I didn't really like the paint scheme that much but it is a Pinarello Montello and on the bucket list without specs! This one has a translucent like pearl topcoat that failed. Best seen here.
P1020178 on Flickr
It has since turned grey or dark as shown without changing with cleaner or wax.
P1010730 on Flickr.
P1010733 on Flickr
Since it is fading and looks really bad, I used 000 steel wool to clean it up, some times 0000. I actually like the colors under the topcoat. The challenge is not to go through the color either on the tubes and more challenging, the around the lugs.
It is a work in process at the moment.
The point is that I don't know what to do other than accept the degradation over time. It is my go-to bike at the moment because I am out of shape and need that small ring on the triple once in awhile. My preference would be to ride the De Rosa, which is chip challenged!
PXL_20220301_124340872 on Flickr
I strongly doubt I will ever sell it so I can mess it up all I want!
P1050226 on Flickr
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.
Last edited by SJX426; 09-21-22 at 05:59 AM.
#8
Full Member
Thread Starter
Join Date: Oct 2021
Location: San Antonio, Texas
Posts: 402
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 128 Post(s)
Liked 437 Times
in
176 Posts
Keeping the quality of the finish is a challenge. I don't have an answer but can empathize with your situation.
The Montello purchased in 2014 was challenged to begin with. The decals were gone and left a ghost.
After 3-4000 miles of commuting and always storing it in the garage at home or a shelter at work, the paint deteriorated to the point of it rubbing off with your finger. This was on the top side of the frame. .
I didn't really like the paint scheme that much but it is a Pinarello Montello and on the bucket list without specs! This one has a translucent like pearl topcoat that failed. Best seen here.
It has since turned grey or dark as shown without changing with cleaner or wax.
Since it is fading and looks really bad, I used 000 steel wool to clean it up, some times 0000. I actually like the colors under the topcoat. The challenge is not to go through the color either on the tubes and more challenging, the around the lugs.
It is a work in process at the moment.
The point is that I don't know what to do other than accept the degradation over time. It is my go-to bike at the moment because I am out of shape and need that small ring on the triple once in awhile. My preference would be to ride the De Rosa, which is chip challenged!
I strongly doubt I will ever sell it so I can mess it up all I want!
The Montello purchased in 2014 was challenged to begin with. The decals were gone and left a ghost.
After 3-4000 miles of commuting and always storing it in the garage at home or a shelter at work, the paint deteriorated to the point of it rubbing off with your finger. This was on the top side of the frame. .
I didn't really like the paint scheme that much but it is a Pinarello Montello and on the bucket list without specs! This one has a translucent like pearl topcoat that failed. Best seen here.
It has since turned grey or dark as shown without changing with cleaner or wax.
Since it is fading and looks really bad, I used 000 steel wool to clean it up, some times 0000. I actually like the colors under the topcoat. The challenge is not to go through the color either on the tubes and more challenging, the around the lugs.
It is a work in process at the moment.
The point is that I don't know what to do other than accept the degradation over time. It is my go-to bike at the moment because I am out of shape and need that small ring on the triple once in awhile. My preference would be to ride the De Rosa, which is chip challenged!
I strongly doubt I will ever sell it so I can mess it up all I want!
#9
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,608
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 74 Post(s)
Tagged: 0 Thread(s)
Quoted: 1624 Post(s)
Liked 2,245 Times
in
1,118 Posts
@BMC_Kid - You will not be disappointed in the ride. Speaking of which, I think I will do one now!
PXL_20220918_123939952 on Flickr
PXL_20220918_123939952 on Flickr
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.
#10
Senior Member
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,998
Bikes: old ones
Mentioned: 305 Post(s)
Tagged: 0 Thread(s)
Quoted: 26481 Post(s)
Liked 10,448 Times
in
7,248 Posts
Here's a good video on cromovelato paint... (290) BIKE PAINT - Cromovelato on vintage steel bike cinelli - YouTube
#11
Senior Member
Join Date: Nov 2015
Posts: 4,533
Mentioned: 102 Post(s)
Tagged: 0 Thread(s)
Quoted: 1653 Post(s)
Likes: 0
Liked 857 Times
in
559 Posts
It must be a real big challenge to maintain/preserve a Chromovelato finish ALONG WITH the typically flakey decals on an 80's Pinarello frame.
Is there any way to stop or slow down the deterioration of a Chromovelato finish?
Did the bike manufacturers have any idea on how fragile the Chromovelato finishes were, when they were applying it on to their bikes back then??
Is there any way to stop or slow down the deterioration of a Chromovelato finish?
Did the bike manufacturers have any idea on how fragile the Chromovelato finishes were, when they were applying it on to their bikes back then??
__________________
72 Line Seeker
83 Davidson Signature
84 Peugeot PSV
84 Peugeot PY10FC
84 Gitane Tour de France.
85 Vitus Plus Carbone 7
86 ALAN Record Carbonio
86 Medici Aerodynamic (Project)
88 Pinarello Montello
89 Bottecchia Professional Chorus SL
95 Trek 5500 OCLV (Project)
72 Line Seeker
83 Davidson Signature
84 Peugeot PSV
84 Peugeot PY10FC
84 Gitane Tour de France.
85 Vitus Plus Carbone 7
86 ALAN Record Carbonio
86 Medici Aerodynamic (Project)
88 Pinarello Montello
89 Bottecchia Professional Chorus SL
95 Trek 5500 OCLV (Project)
#12
Full Member
Thread Starter
Join Date: Oct 2021
Location: San Antonio, Texas
Posts: 402
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 128 Post(s)
Liked 437 Times
in
176 Posts
It must be a real big challenge to maintain/preserve a Chromovelato finish ALONG WITH the typically flakey decals on an 80's Pinarello frame.
Is there any way to stop or slow down the deterioration of a Chromovelato finish?
Did the bike manufacturers have any idea on how fragile the Chromovelato finishes were, when they were applying it on to their bikes back then??
Is there any way to stop or slow down the deterioration of a Chromovelato finish?
Did the bike manufacturers have any idea on how fragile the Chromovelato finishes were, when they were applying it on to their bikes back then??
What I am inclined to do to preserve the finish is clear coat the frame, then eventually apply PPF to those are vulnerable to rock chips. I do this to all my bikes and it is completely reversible and replaceable. I figure the next owner will not be too concerned about what I did to preserve the finish way beyond what is typical for these bikes. I could have it stripped and a new cromovelato finish applied but then I'd lose all of its wonderful patina. When you look at my bike in the bright sunlight, you will see a lot of crazing in the finish. This crazing has a way of refracting the light, making it actually sparkle. You can replicate that. I don't know whether or not the manufacturers understood the eventual fragility of the finish. I do know that during the 80s, a lot of frames coming out of Italy had mediocre paint. The decals on Pinarello frames from the period are another weak spot as well. Why mine have held on for so long is probably due to it not getting many miles and that it was stored inside, out of the elements. I am sure if I subjected it to regular contact with the environment through riding or storage, they would quickly start failing. For the last 15 years, I've stored it with the rest of my bikes in a climate-controlled garage.
#13
All Campy All The Time
Join Date: Nov 2013
Location: Richmond, Virginia
Posts: 1,419
Bikes: Listed in my signature.
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 178 Post(s)
Liked 114 Times
in
63 Posts
@BMC_Kid - You will not be disappointed in the ride. Speaking of which, I think I will do one now!
PXL_20220918_123939952 on Flickr
PXL_20220918_123939952 on Flickr
__________________
My C&V Bikes:
1972 Bottecchia Professional, 1972 Legnano Olympiade Record,
1982 Colnago Super, 1987 Bottecchia Team C-Record,
1988 Pinarello Montello, 1990 Masi Nuova Strada Super Record,
1995 Bianchi Campione d'Italia, 1995 DeBernardi Thron
My C&V Bikes:
1972 Bottecchia Professional, 1972 Legnano Olympiade Record,
1982 Colnago Super, 1987 Bottecchia Team C-Record,
1988 Pinarello Montello, 1990 Masi Nuova Strada Super Record,
1995 Bianchi Campione d'Italia, 1995 DeBernardi Thron
#14
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,608
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 74 Post(s)
Tagged: 0 Thread(s)
Quoted: 1624 Post(s)
Liked 2,245 Times
in
1,118 Posts
I did go for a ride and did pass this place again. Part of my normal riding route. 22.7mi.
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.
#15
Full Member
Thread Starter
Join Date: Oct 2021
Location: San Antonio, Texas
Posts: 402
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 128 Post(s)
Liked 437 Times
in
176 Posts
I came across this 1989 Pinarello catalog while surfing the web tonight. Here’s my frame, bottom left, color called Chromonero, black chrome.
Unlike the other cromovelato colored frames, the chromonero lacks the chromed forks and rear triangle.
Unlike the other cromovelato colored frames, the chromonero lacks the chromed forks and rear triangle.