Wireless computer interference
#1
Junior Member
Thread Starter
Wireless computer interference
FIle this problem under the "Who knew?" category.
As the days grow shorter I'm riding at night more and more. I have a Niterider headlight/taillight set that I'm using and it gives me good lighting for my rides. Separately I noticed that my Cateye wireless computer wasn't working. Checked the battery, all's good. Then I discovered that half way through a recent ride my computer quit working, and that perhaps coincided with my turning my headlight on.
Sure enough I was able to confirm. So I went to the Cateye instructions (who reads 'em, anyway???) and it specifically says that a battery powered light can interfere with use of the computer. I guess the light blasts out EMI that disrupts the wireless sensor sending signals to the head unit. The computer itself still works but it's not getting any signal from the sensor. Who knew?
So now I have to move things around and see if I can solve the problem. Or build a Faraday cage for the headlight!! Does anyone know if battery powered lights interfere with GPS units? That may be my alternative...
As the days grow shorter I'm riding at night more and more. I have a Niterider headlight/taillight set that I'm using and it gives me good lighting for my rides. Separately I noticed that my Cateye wireless computer wasn't working. Checked the battery, all's good. Then I discovered that half way through a recent ride my computer quit working, and that perhaps coincided with my turning my headlight on.
Sure enough I was able to confirm. So I went to the Cateye instructions (who reads 'em, anyway???) and it specifically says that a battery powered light can interfere with use of the computer. I guess the light blasts out EMI that disrupts the wireless sensor sending signals to the head unit. The computer itself still works but it's not getting any signal from the sensor. Who knew?
So now I have to move things around and see if I can solve the problem. Or build a Faraday cage for the headlight!! Does anyone know if battery powered lights interfere with GPS units? That may be my alternative...
#2
Super Modest
Join Date: Jun 2002
Location: Central Illinois
Posts: 23,513
Bikes: Trek Emonda, Giant Propel, Colnago V3, Co-Motion Supremo, ICE VTX WC
Mentioned: 107 Post(s)
Tagged: 1 Thread(s)
Quoted: 10998 Post(s)
Liked 4,678 Times
in
2,150 Posts
I know neon lights interfere. My wife parked her bike under a Silver Bullet sign and came back to find a max speed of 94.1 mph.
__________________
Keep the chain tight!
Likes For Trsnrtr:
#3
Forum Moderator
Join Date: Jul 2007
Location: Kalamazoo MI
Posts: 20,726
Bikes: Fuji SL2.1 Carbon Di2 Cannondale Synapse Alloy 4 Trek Checkpoint ALR-5 Viscount Aerospace Pro Colnago Classic Rabobank Raleigh C50 Cromoly Hybrid Legnano Tipo Roma Pista
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 3111 Post(s)
Liked 6,703 Times
in
3,841 Posts
A rider in my group has to run her headlight in the ON selection instead of blinking as in blinking mode it blocks her Cateye.
__________________
#4
• —
Join Date: Jun 2015
Location: Land of Pleasant Living
Posts: 12,306
Bikes: Shmikes
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 10217 Post(s)
Liked 5,922 Times
in
3,193 Posts
FIle this problem under the "Who knew?" category.
As the days grow shorter I'm riding at night more and more. I have a Niterider headlight/taillight set that I'm using and it gives me good lighting for my rides. Separately I noticed that my Cateye wireless computer wasn't working. Checked the battery, all's good. Then I discovered that half way through a recent ride my computer quit working, and that perhaps coincided with my turning my headlight on.
Sure enough I was able to confirm. So I went to the Cateye instructions (who reads 'em, anyway???) and it specifically says that a battery powered light can interfere with use of the computer. I guess the light blasts out EMI that disrupts the wireless sensor sending signals to the head unit. The computer itself still works but it's not getting any signal from the sensor. Who knew?
So now I have to move things around and see if I can solve the problem. Or build a Faraday cage for the headlight!! Does anyone know if battery powered lights interfere with GPS units? That may be my alternative...
As the days grow shorter I'm riding at night more and more. I have a Niterider headlight/taillight set that I'm using and it gives me good lighting for my rides. Separately I noticed that my Cateye wireless computer wasn't working. Checked the battery, all's good. Then I discovered that half way through a recent ride my computer quit working, and that perhaps coincided with my turning my headlight on.
Sure enough I was able to confirm. So I went to the Cateye instructions (who reads 'em, anyway???) and it specifically says that a battery powered light can interfere with use of the computer. I guess the light blasts out EMI that disrupts the wireless sensor sending signals to the head unit. The computer itself still works but it's not getting any signal from the sensor. Who knew?
So now I have to move things around and see if I can solve the problem. Or build a Faraday cage for the headlight!! Does anyone know if battery powered lights interfere with GPS units? That may be my alternative...
Likes For MoAlpha:
#5
Senior Member
Join Date: Jul 2015
Location: reno, nv
Posts: 2,323
Bikes: yes, i have one
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 1151 Post(s)
Liked 1,193 Times
in
694 Posts
To change LED brightness a technique called pulse width modulation is used at a relatively high frequency. Likely this is the cause of interference.
Likes For spelger:
#6
Full Member
Join Date: Dec 2014
Location: New Hampshire
Posts: 499
Bikes: Pinarello Gavia TSX; Bianchi Intenso
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 169 Post(s)
Likes: 0
Liked 93 Times
in
63 Posts
Found this same problem myself with a Cateye Padrone Smart and a Niterider headlamp. You can sometimes solve it by moving the Niterider farther away from the computer along the bars.
I solved my problem with a GPS unit. Also the Bluetooth/ANT+ speed sensor, connected to the computer, was not impacted by the frequency of he Niterider.
I solved my problem with a GPS unit. Also the Bluetooth/ANT+ speed sensor, connected to the computer, was not impacted by the frequency of he Niterider.
#7
Senior Member
Join Date: Jan 2009
Location: Colorado Springs, CO
Posts: 5,984
Bikes: 2015 Charge Plug, 2007 Dahon Boardwalk, 1997 Nishiki Blazer, 1984 Nishiki International, 2006 Felt F65, 1989 Dahon Getaway V
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 1366 Post(s)
Liked 1,688 Times
in
831 Posts
Likes For BobbyG:
#8
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 15,209
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6320 Post(s)
Liked 4,910 Times
in
3,384 Posts
See what you learn when you read instructions and all the other stuff they give you!
Video camera's like a GoPro also sometimes are a problem. But just like lights, it's rare evidently. I've never had an issue I could pin on lights or camera. But if you are having issues you should eliminate various things one at a time until you find the culprit and then once found, see if you can move things around to let them work harmoniously.
Video camera's like a GoPro also sometimes are a problem. But just like lights, it's rare evidently. I've never had an issue I could pin on lights or camera. But if you are having issues you should eliminate various things one at a time until you find the culprit and then once found, see if you can move things around to let them work harmoniously.
#9
Junior Member
Thread Starter
That is funny. When we travel we sometimes bring a small desktop fan for white noise. My wife once left her Fitbit on a night stand with that fan running. When she put her Fitbit on the next morning she had 25,000 steps.
#10
Junior Member
Thread Starter
Update: moving the headlight and the Cateye so they're about 2" apart seems to have resolved the problem. I originally had the headlight so close to the Cateye that it was actually touching it -- okay, not the smartest move on my part.
Issue resolved without the need to build a Faraday cage.
Issue resolved without the need to build a Faraday cage.
#11
Super Modest
Join Date: Jun 2002
Location: Central Illinois
Posts: 23,513
Bikes: Trek Emonda, Giant Propel, Colnago V3, Co-Motion Supremo, ICE VTX WC
Mentioned: 107 Post(s)
Tagged: 1 Thread(s)
Quoted: 10998 Post(s)
Liked 4,678 Times
in
2,150 Posts
__________________
Keep the chain tight!
#12
Grupetto Bob
Join Date: Sep 2020
Location: Seattle-ish
Posts: 6,352
Bikes: Bikey McBike Face
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 2657 Post(s)
Liked 5,840 Times
in
3,007 Posts
This thread is not just for 50+ but the General category since it could impact the youngens too
__________________
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
Likes For spelger:
#14
Sr Member on Sr bikes
Years ago, when I briefly tried using a wireless heart rate monitor, with the wristwatch receptor, while riding a road bike with a wired computer, I discovered that the magnetic for the computer on the front wheel would cause interface when I had my hands on the bar drops.
This issue has me wondering if/how RF interference would affect wireless shifting.
Dan
This issue has me wondering if/how RF interference would affect wireless shifting.
Dan