New Project : Schwinn High Sierra
#1
New Project : Schwinn High Sierra
Last September we moved from Salem to the Tulsa Area . Sunday I found this nice old Schwinn High Sierra its got a lot of grime and has sat for years so it will need a complete rebuild all the components though are in fine shape so it should clean up and make a wonderful rider. My only complaint are the roller cam brakes but I can live with them given the triple butted tubing and that wonderful Deore drive train.
the previous owner installed a quill extender but otherwise the bike is all original and the extender will be going away. This should make for a wonderful gravel touring rig I hope.
the previous owner installed a quill extender but otherwise the bike is all original and the extender will be going away. This should make for a wonderful gravel touring rig I hope.
#2
Full Member
Last September we moved from Salem to the Tulsa Area . Sunday I found this nice old Schwinn High Sierra its got a lot of grime and has sat for years so it will need a complete rebuild all the components though are in fine shape so it should clean up and make a wonderful rider. My only complaint are the roller cam brakes but I can live with them given the triple butted tubing and that wonderful Deore drive train.
the previous owner installed a quill extender but otherwise the bike is all original and the extender will be going away. This should make for a wonderful gravel touring rig I hope.
the previous owner installed a quill extender but otherwise the bike is all original and the extender will be going away. This should make for a wonderful gravel touring rig I hope.
#3
Cantis and Roller Cams don't use the same studs and placement of the studs IIRC or else I would do that in a heart beat, the only thing you can replace the roller cams with are Dia Compe 990 unless I am mistaken .
#4
Full Member
I see, may be some other folks with better insights will chime in to set us straight. Meanwhile, i'll be following your progress with making this HS road worthy again. I got one earlier this year with roller cam and XT biopace drive train and the cool fork but not the nice chrome finish like your.
#5
I see, may be some other folks with better insights will chime in to set us straight. Meanwhile, i'll be following your progress with making this HS road worthy again. I got one earlier this year with roller cam and XT biopace drive train and the cool fork but not the nice chrome finish like your.
Thanks I just double checked and you can use the U brakes, depending on what I ultimately decide I may see about getting some Deore U brakes from fleabay or I may just keep these on there . Roller cams seem to be a love hate sorta thing, this bike just sat in a storage building and deteriorated from the best I can tell, there is no wear on the drive train components or pads the lady who sold it to me said she bought it new 38 years ago . As soon as it stops raining I will wash the grime off and do an inventory of items to replace , but it appears for now to be the usual suspects . I was surprised at how light this bike is
#6
Senior Member
The roller-cams are MUCH easier to dial in than all the nay-sayers claim, and are yummy in operation, and absolute eye candy.
Likes For madpogue:
#7
Senior Member
__________________
The Simplicity of Vintage Cycles
The Simplicity of Vintage Cycles
Likes For OTS:
#9
Henderson, NV
Join Date: Jan 2022
Location: Henderson/Las Vegas NV
Posts: 589
Bikes: Trek Alpha 3700, GT STS DH, Raleigh Grand Prix, Fisher Montare, Fisher CR-7, Fisher Aquila, Diamondback Sorrento, The Bike Beat Revolution, KHS XC 504R
Liked 656 Times
in
323 Posts
One of my favorite bikes was my early 80's black chrome High Sierra.
Mine had the chainstay U brake. It was upgraded through the years with LX drivetrain, XT thumb shifters, and a Trek DDS3 suspension fork.
I rode it all over SoCal and Kauai.
Looked similar to this one when I bought it.
Mine had the chainstay U brake. It was upgraded through the years with LX drivetrain, XT thumb shifters, and a Trek DDS3 suspension fork.
I rode it all over SoCal and Kauai.
Looked similar to this one when I bought it.
Likes For Desert Ryder:
#10
Full Member
Interesting that they had so many configurations in presumably a short production life span.
Likes For tmnguuyen:
#11
Full Member
Join Date: May 2022
Location: Dixiana, AL
Posts: 254
Bikes: 1993 Diamond Back Sorrento, 1965 Schwinn Racer 3-speed, 1987 Schwinn High Sierra, 1990 Specialized Sirrus, 2020 Specialized Sirrus 3.0, 2013 Giant Seek 1
Liked 787 Times
in
202 Posts
Love my 87 HS, I went through it last December. It is a favorite, rides very smooth.
About a month ago I picked up it's twin,and it is in line for a turn on the repair stand.
87 High Sierra #1
87 High Sierra #2, waiting patiently for a refurbishment.
About a month ago I picked up it's twin,and it is in line for a turn on the repair stand.
87 High Sierra #1
87 High Sierra #2, waiting patiently for a refurbishment.
#12
Senior Member
Join Date: Jun 2009
Location: Chicago, the leafy NW side
Posts: 2,506
Bikes: 1974 Motobecane Grand Record, 1987 Miyata Pro, 1988 Bob Jackson Lady Mixte (wife's), others in the family
Liked 172 Times
in
88 Posts
I spotted a black chrome High Sierra on FB Marketplace a few days ago...actually the FB algorithm highlighted it, which was a surprise. Not sure of year and no listing of components, though I can see roller-cam brakes, nont on chainstay. Condition looks great except for a kickstand, but it's priced pretty high at $350, and I wouldn't have time for the 3 hr trip to get it for at least a week.
Also, I already have two disassembled mtn bikes in mid-project mode, plus a Cimarron I need to either sell or fix up as a keeper. And my wife's Bridgestone needs some changes to suit her better.
But that black chrome sure is cool...
I don't need it, right? RIGHT?!?
Also, I already have two disassembled mtn bikes in mid-project mode, plus a Cimarron I need to either sell or fix up as a keeper. And my wife's Bridgestone needs some changes to suit her better.
But that black chrome sure is cool...
I don't need it, right? RIGHT?!?
__________________
I never think I have hit hard, unless it rebounds.
- Dr Samuel Johnson
I never think I have hit hard, unless it rebounds.
- Dr Samuel Johnson
Last edited by Chicago Al; 07-12-23 at 09:43 AM.
#13
Full Member
Beside the roller cam being a love it or hate it feature of this bike, what do you guys think about the various forks they used over the years, lugged fork, unicrown, unicrown lug? I was thinking about selling my HS but seeing this thread, i'm having second thought..
Last edited by tmnguuyen; 07-13-23 at 11:50 PM.
Likes For tmnguuyen:
#14
Dirty Heathen
Join Date: Oct 2015
Location: MC-778, 6250 fsw
Posts: 2,230
Bikes: 1997 Cannondale, 1976 Bridgestone, 1998 SoftRide, 1989 Klein, 1989 Black Lightning #0033
Liked 952 Times
in
554 Posts
My 89 Klein MTB probably has more in common with my 74 Bridgestone tourer than my 96 Cannondale XC bike
Dia Compe 990 is THE u-brake, but it’s not the only one. ( still in production, though). U-brakes are still common in BMX; Dan’s Comp BMX has several kits at a range of prices (and colors). If the RollerCams are in good condition, I’d keep rolling with those, but one advantage to new brakes is that they come with new pads, straddles and hardware, so there’s no faffing about, trying to make 40-year old parts work.