Roadside puncture repairs, best way to remove offending sharp object?
#1
Roadside puncture repairs, best way to remove offending sharp object?
Hi, I have been cycling for many years and have always carried a small pair of pliers and a sharp tool to remove any thorns, glass etc... from a tyre. My son has recently got into cycling but wants to travel as light as possible. I was just wondering if it's actually necessary to be be hauling around pliers and sharp tool to remove sharp splinters from a tyre?
#2
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 16,143
Bikes: Tarmac Disc Comp Di2 - 2020
Liked 5,404 Times
in
3,729 Posts
Depends on many things about personal preference and how often one is inconvenienced by flat tires from a actual tread puncture. For the thin tires with little to no tread pattern on a road bike, I've never had an issue pulling out bits of wire, thorns or rock shards with my fingers or scratching them out with my finger nail.
I don't carry much around in my bike bag either except for a few allen keys, a screwdriver with a flat and Phillips point, a tube and CO2 inflator with some levers. Never carried pliers or a multi-tool. Although one time I found a swiss army knife in there that was forgotten in the bottom of the bag till one day I emptied it out.
Your son will build up his bag with the stuff he finds he needs. Experiences will tell him what those tools and things will be. Planning for the unexpected that never happens can have one carrying a small bicycle shop with them that is never used.
Welcome to BF!
I don't carry much around in my bike bag either except for a few allen keys, a screwdriver with a flat and Phillips point, a tube and CO2 inflator with some levers. Never carried pliers or a multi-tool. Although one time I found a swiss army knife in there that was forgotten in the bottom of the bag till one day I emptied it out.
Your son will build up his bag with the stuff he finds he needs. Experiences will tell him what those tools and things will be. Planning for the unexpected that never happens can have one carrying a small bicycle shop with them that is never used.
Welcome to BF!
Likes For Crwban:
#4
Senior Member
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 6,357
Bikes: 1989 Cinelli Supercorsa
Liked 3,313 Times
in
1,992 Posts
Iride01’s response is spot-on. But if you want to carry a tweezer, have at it!
#5
Have had good luck with this
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Once actually needed it (had a wire embedded deeply enough that I couldn't get it out with fingernails)
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Once actually needed it (had a wire embedded deeply enough that I couldn't get it out with fingernails)
#6
Senior Member
Join Date: May 2010
Location: Bastrop Texas
Posts: 4,768
Bikes: Univega, Peu P6, Peu PR-10, Ted Williams, Peu UO-8, Peu UO-18 Mixte, Peu Dolomites
Liked 1,844 Times
in
1,182 Posts
I carry a tool kit, but really, there are so many things that could be used to lever out an offending object. I never thought about taking pliers just for flat repair.
I used to carry around a set of Points Pliers in my bike bag. They are about as small and light weight as you can get and still be generally effective.
https://www.amazon.com/TEKTON-2-Inch.../dp/B074PCBGC4
Now days I just carry a small multi-tool along with my regular multi bike tool.
https://www.amazon.com/Gerber-Dime-M...s%2C150&sr=1-1
I used to carry around a set of Points Pliers in my bike bag. They are about as small and light weight as you can get and still be generally effective.
https://www.amazon.com/TEKTON-2-Inch.../dp/B074PCBGC4
Now days I just carry a small multi-tool along with my regular multi bike tool.
https://www.amazon.com/Gerber-Dime-M...s%2C150&sr=1-1
__________________
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
Last edited by zandoval; 07-16-23 at 01:17 PM.
#7
Should Be More Popular
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 43,634
Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix
Liked 9,565 Times
in
4,422 Posts
Likes For datlas:
#8
Banned
Join Date: Feb 2008
Location: Mississauga/Toronto, Ontario canada
Posts: 8,719
Bikes: I have 3 singlespeed/fixed gear bikes
Liked 2,496 Times
in
1,287 Posts
I always carry my Leatherman multitool which has pliers. I never actually had to use pliers to pull any sharp objects out of my tire but I still carry my Leatherman tool just in case I ever need it. It's a very useful tool to have around.
#9
Not quite dead.
I have a Gerber Dime multi tool that has a small tweezer on it, and it's in the tool bag I carry whenever I ride, along with various other tools I might need. I don't have any folks in the area that I can call in case of a breakdown, so I'm prepared for most malfunctions, from a flat tire to a broken chain. Self reliance is a good thing.
Likes For DeadGrandpa:
#10
Senior Member
Depends on many things about personal preference and how often one is inconvenienced by flat tires from a actual tread puncture. For the thin tires with little to no tread pattern on a road bike, I've never had an issue pulling out bits of wire, thorns or rock shards with my fingers or scratching them out with my finger nail.
#12
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 13,321
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Liked 4,331 Times
in
2,788 Posts
+1 I cannot speak for the current Leathermans (Leathermen?) but my pre-1990 0ne is the single best pair of pliers I have ever used for pulling out very small objects. I have been known to set down my shop pliers and traversed the house to get my riding Leatherman. Almost as good as very good tweezers for grabbing and they pull a whole lot harder. I love that you can push solidly into tire casings to get the sliver to bulge out enough to grab.
#13
Grupetto Bob
Join Date: Sep 2020
Location: Seattle-ish
Posts: 6,947
Bikes: Bikey McBike Face
Liked 6,608 Times
in
3,342 Posts
In 35 years I have never found the need to carry a tool to pull out a piece of glass, thorn or piece of wire. I use my fingers and pull the offending item out. Never had an issue.
__________________
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
Likes For rsbob:
#15
Senior Member
Join Date: Dec 2010
Location: northern Deep South
Posts: 9,156
Bikes: Fuji Touring, Novara Randonee
Liked 2,159 Times
in
1,328 Posts
Fingernails almost always work for me. If my wife ever got interested in cycling, I'd put some tweezers in her seat bag; her fingernails flex much more than mine.
Likes For pdlamb:
#16
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,670
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Liked 2,600 Times
in
1,593 Posts
My fingernails are weak and my fingertips are shaped like doorknobs, so I've used my teeth to pull little sharp things out of tires a few times.
At home, I use a small sharp nail to pry little things out of tire treads.
At home, I use a small sharp nail to pry little things out of tire treads.