Vintage bikes with 700c and wide tire clearance (cantis)
#76
Yeah, shaving 200 grams off a touring bike is a bit of a misplaced priority. Is not like we are 150-pound racers trying to shave seconds off a race. Even in brevets and randoneering it has minimal effect.
#77
Senior Member
Just in case it hasn't been mentioned and in case you aren't aware of the terminology,...
Look for a non-suspension "29er".
A 29er will be a mountain bike with LOTS of clearance for wide tires, and the early ones likely use cantilever brakes. The 29 designation refers to their use of 700c wheels.
A quick picture search yielded this:
Another quick search:
Look for a non-suspension "29er".
A 29er will be a mountain bike with LOTS of clearance for wide tires, and the early ones likely use cantilever brakes. The 29 designation refers to their use of 700c wheels.
A quick picture search yielded this:
Another quick search:
Last edited by Bad Lag; 07-26-23 at 01:05 PM.
Likes For Bad Lag:
#78
I’m a little Surly
Join Date: Jan 2010
Location: Near the district
Posts: 2,434
Bikes: Two Cross Checks, Karate Monkey, Disc Trucker, and a VO Randonneur
Liked 1,314 Times
in
655 Posts
In the end the CC will take 44's without fenders, 38's with the carbon fork and costs $600 OOTB it's not super light and it's not intended to be but if you really want an old school bike with modern standards it's not a bad choice.
^Keep in mind that I'm a Surly guy I own four and when I get back to the states in October it'll be five when I buy my Big Easy.
^Keep in mind that I'm a Surly guy I own four and when I get back to the states in October it'll be five when I buy my Big Easy.
#79
Senior Member
So would I, but I was really only half guessing, and this review also posted by sol is why https://www.bikeforums.net/classic-v...oia-allez.html
Champion 2 + champion 3 down tube sounds like to me. At any rate, really nice bike. I would love to have another one in my size.
Champion 2 + champion 3 down tube sounds like to me. At any rate, really nice bike. I would love to have another one in my size.
~2500g for a 60cm frame isn't bad, but it isn't exactly super lightweight. Which is why I said that if he's fine with his current road-ish bike frame weight it really opens up his options to nearly any cro-mo frame.
Likes For Piff:
#80
Car free since 2018
Join Date: Aug 2017
Location: Vancouver, BC
Posts: 703
Bikes: Mostly japanese ones
Liked 279 Times
in
137 Posts
That's a different model year, he's got a 1986 Sequoia which was quoted as weighing ~5 pounds 9 ounces in another SoL review that I linked further up in the thread. Here it is: https://www.bikeforums.net/classic-v...d-sequoia.html
~2500g for a 60cm frame isn't bad, but it isn't exactly super lightweight. Which is why I said that if he's fine with his current road-ish bike frame weight it really opens up his options to nearly any cro-mo frame.
~2500g for a 60cm frame isn't bad, but it isn't exactly super lightweight. Which is why I said that if he's fine with his current road-ish bike frame weight it really opens up his options to nearly any cro-mo frame.
#81
Senior Member
Join Date: May 2019
Location: Santa Rosa, CA
Posts: 602
Bikes: Bianchi Campione d'Italia, Lemond Poprad, LeMond Victoire, Kona Hei Hei, Ritchey Ultra, Schwinn "Paramount" PDG, incoming Mercian rando by Gugie
Liked 406 Times
in
259 Posts
https://www.bikeforums.net/classic-v...ax-tubing.html (And another link inside that thread if you really want to dig into it.)
Tenax is a seamed and then drawn cromoly tubeset manufactured by Columbus and sold exclusively to Schwinn. Similar to Cromor. It's not clear whether there was a consistent set of tubing thicknesses, or if Schwinn ordered it in different thicknesses for different models or years.
Tenax is a seamed and then drawn cromoly tubeset manufactured by Columbus and sold exclusively to Schwinn. Similar to Cromor. It's not clear whether there was a consistent set of tubing thicknesses, or if Schwinn ordered it in different thicknesses for different models or years.
#82
Not lost wanderer.
Also look for a Centurion Pro-tour. From 83 newer they have canti brakes. I had 38mm tires on mine when I had it
__________________
72 Geoffery Butler, 72 Guficatizion Witcomb, 72 Raleigh Gran Sport SS, 73 Raleigh Super Course dingle speed, 74 Raleigh international, 81 Centurion Pro-Tour, 74 Gugie Grandier Sportier, 85 Gazelle Primeur, 29rBMX, Surley Steamroller 650b
72 Geoffery Butler, 72 Guficatizion Witcomb, 72 Raleigh Gran Sport SS, 73 Raleigh Super Course dingle speed, 74 Raleigh international, 81 Centurion Pro-Tour, 74 Gugie Grandier Sportier, 85 Gazelle Primeur, 29rBMX, Surley Steamroller 650b
Likes For bwilli88:
#83
Newbie
Thread Starter
Thanks again for all the feedback everyone.
I think I found something that might do the job, a hybrid. Saw this (I think 98) trek 730 posted today and am going to see it tomorrow for $200. Looks to be all original, and maybe I can make some future upgrades if I feel inclined, like drop bars etc.
For this catalogue year, it doesn’t look like they had a 750 (therefore maybe it’s their top steel multitrack, for what that’s worth?) and it doesn’t list tubing as true temper or anything special (like TT on the 520, for example) it just says full chromoly (as opposed to the 720 where the stays are hi-ten). I am assuming the bike is like 27lbs or so. Did the later multitracks lose their luster a bit vs a few years prior or are these considered decent still?
Presuming the fit is good, do we think this could be a good choice?
https://www.retrobike.co.uk/gallery2...998_20trek.pdf
I think I found something that might do the job, a hybrid. Saw this (I think 98) trek 730 posted today and am going to see it tomorrow for $200. Looks to be all original, and maybe I can make some future upgrades if I feel inclined, like drop bars etc.
For this catalogue year, it doesn’t look like they had a 750 (therefore maybe it’s their top steel multitrack, for what that’s worth?) and it doesn’t list tubing as true temper or anything special (like TT on the 520, for example) it just says full chromoly (as opposed to the 720 where the stays are hi-ten). I am assuming the bike is like 27lbs or so. Did the later multitracks lose their luster a bit vs a few years prior or are these considered decent still?
Presuming the fit is good, do we think this could be a good choice?
https://www.retrobike.co.uk/gallery2...998_20trek.pdf
Last edited by Danmozy66; 07-28-23 at 02:22 PM.
#84
That wouldn't be the bike I would look for. At least in my area, which is rural, Multitracks commonly pop up for $75-100 with an hour or two, even as low as $50. I even picked up a lugged 790 for $150 this summer (it was the first one I'd ever seen though).
With that bike, even the tires look original. By the time you factor in new handlebars, shifters, tires, seat post, stem, etc. you're probably looking at a $500 investment. You can buy a lot of bike for that.
I'd try to find something that is at least early 90s - IMO that's the real sweet spot as far as value goes. By the time you get to this era you get a lot less bike for your money as far as I'm concerned.
With that bike, even the tires look original. By the time you factor in new handlebars, shifters, tires, seat post, stem, etc. you're probably looking at a $500 investment. You can buy a lot of bike for that.
I'd try to find something that is at least early 90s - IMO that's the real sweet spot as far as value goes. By the time you get to this era you get a lot less bike for your money as far as I'm concerned.
#85
Newbie
Thread Starter
That wouldn't be the bike I would look for. At least in my area, which is rural, Multitracks commonly pop up for $75-100 with an hour or two, even as low as $50. I even picked up a lugged 790 for $150 this summer (it was the first one I'd ever seen though).
With that bike, even the tires look original. By the time you factor in new handlebars, shifters, tires, seat post, stem, etc. you're probably looking at a $500 investment. You can buy a lot of bike for that.
I'd try to find something that is at least early 90s - IMO that's the real sweet spot as far as value goes. By the time you get to this era you get a lot less bike for your money as far as I'm concerned.
With that bike, even the tires look original. By the time you factor in new handlebars, shifters, tires, seat post, stem, etc. you're probably looking at a $500 investment. You can buy a lot of bike for that.
I'd try to find something that is at least early 90s - IMO that's the real sweet spot as far as value goes. By the time you get to this era you get a lot less bike for your money as far as I'm concerned.
Last edited by Danmozy66; 07-28-23 at 02:43 PM.
#86
Newbie
Thread Starter
Maybe this crossroads trail LX that is posted is a better start? Seems to be from 92 with LX components although the top tube geo seems more sloping in the catalogue. $100. The bigger size could be better for me in terms of drop bars in the end. Not sure if these frames are considered decent
#87
Senior Member
Thanks again for all the feedback everyone.
I think I found something that might do the job, a hybrid. Saw this (I think 98) trek 730 posted today and am going to see it tomorrow for $200. Looks to be all original, and maybe I can make some future upgrades if I feel inclined, like drop bars etc.
For this catalogue year, it doesn’t look like they had a 750 (therefore maybe it’s their top steel multitrack, for what that’s worth?) and it doesn’t list tubing as true temper or anything special (like TT on the 520, for example) it just says full chromoly (as opposed to the 720 where the stays are hi-ten). I am assuming the bike is like 27lbs or so. Did the later multitracks lose their luster a bit vs a few years prior or are these considered decent still?
Presuming the fit is good, do we think this could be a good choice?
I think I found something that might do the job, a hybrid. Saw this (I think 98) trek 730 posted today and am going to see it tomorrow for $200. Looks to be all original, and maybe I can make some future upgrades if I feel inclined, like drop bars etc.
For this catalogue year, it doesn’t look like they had a 750 (therefore maybe it’s their top steel multitrack, for what that’s worth?) and it doesn’t list tubing as true temper or anything special (like TT on the 520, for example) it just says full chromoly (as opposed to the 720 where the stays are hi-ten). I am assuming the bike is like 27lbs or so. Did the later multitracks lose their luster a bit vs a few years prior or are these considered decent still?
Presuming the fit is good, do we think this could be a good choice?
Likes For Jeff Neese:
#89
Here's a pretty good example for what that Crossroads could be. For half the price, I think you're doing much better there. I'm still a sucker for a lugged frame, so if I'm looking for a vintage bike I'm going to go all-in on, that's what I'm looking for, but that's just a personal preference.
One thing that's holding me up is I can't tell for sure if the Crossroads Trail LX is CroMo or not. The sport version says it is, but nothing for the Trail.
One thing that's holding me up is I can't tell for sure if the Crossroads Trail LX is CroMo or not. The sport version says it is, but nothing for the Trail.
Likes For tdrich07:
#90
Senior Member
If you set up saved searches and alerts on Craigslist and FB Marketplace and include all the models you're interested in, then you just have to look every day and be patient. Sometimes it takes a while for the right one to come along.
Likes For Jeff Neese:
#91
Senior Member
That works when the seller knows how to properly brand/post the bike s/he's selling, and when the seller knows how to spell. Still worth scouring the sale sites frequently for poorly listed, but good deal, bikes.
#92
Newbie
Thread Starter
These are pics from a multitrack forum on here. Some got it down to around 22-23lbs. Seems like 40mm tires will clear comfortably as well. Thoughts on the 730? They didn’t make a 750-790 in 98. I think it was their highest tier hybrid steel frame for whatever that is worth haha
From bikeforums multitrack thread
Last edited by Danmozy66; 07-31-23 at 10:30 AM.
#93
Senior Member
I went and looked at it, and yes it is in really good original condition. Unfortunately the original parts don’t make for the coolest looking bike off the hop. Factory hubs and components are Altus level which are potentially a bit meh, and stock bar not so great, but I’m hoping something like this could happen eventually?
.....
.....
The 1998 catalog shows the 730 as being equipped with a combination of Acera and Alivio, which were still not high-end, but better than Altus.
#94
Senior Member
Join Date: Sep 2017
Location: Eastern Shore, MD
Posts: 2,113
Bikes: Road ready: 1993 Koga Miyata City Liner Touring Hybrid, 1989 Centurion Sport DLX, "I Blame GP" Bridgestone CB-1. Projects: Yea, I got a problem....
Liked 752 Times
in
426 Posts
The later model Multitracks had more of a road oriented geometry, so lower bottom brackets and I think shorter top tubes.
#95
Hoards Thumbshifters
Join Date: Jul 2010
Location: Signal Mountain, TN
Posts: 1,158
Bikes: '23 Black Mtn MC, '87 Bruce Gordon Chinook, '08 Jamis Aurora, '86 Trek 560, '97 Mongoose Rockadile, & '91 Trek 750
Liked 342 Times
in
194 Posts
Thanks again for all the feedback everyone.
I think I found something that might do the job, a hybrid. Saw this (I think 98) trek 730 posted today and am going to see it tomorrow for $200. Looks to be all original, and maybe I can make some future upgrades if I feel inclined, like drop bars etc.
For this catalogue year, it doesn’t look like they had a 750 (therefore maybe it’s their top steel multitrack, for what that’s worth?) and it doesn’t list tubing as true temper or anything special (like TT on the 520, for example) it just says full chromoly (as opposed to the 720 where the stays are hi-ten). I am assuming the bike is like 27lbs or so. Did the later multitracks lose their luster a bit vs a few years prior or are these considered decent still?
Presuming the fit is good, do we think this could be a good choice?
https://www.retrobike.co.uk/gallery2...998_20trek.pdf
I think I found something that might do the job, a hybrid. Saw this (I think 98) trek 730 posted today and am going to see it tomorrow for $200. Looks to be all original, and maybe I can make some future upgrades if I feel inclined, like drop bars etc.
For this catalogue year, it doesn’t look like they had a 750 (therefore maybe it’s their top steel multitrack, for what that’s worth?) and it doesn’t list tubing as true temper or anything special (like TT on the 520, for example) it just says full chromoly (as opposed to the 720 where the stays are hi-ten). I am assuming the bike is like 27lbs or so. Did the later multitracks lose their luster a bit vs a few years prior or are these considered decent still?
Presuming the fit is good, do we think this could be a good choice?
https://www.retrobike.co.uk/gallery2...998_20trek.pdf
#96
Newbie
Thread Starter
There's nothing really wrong with Altus, if you get the bike cheap. The lower-end Shimano stuff is referred to as "cheap and cheerful" - it works fine even if it is low-end. Replace it with better components as things wear out or as budget permits. If it still has the original gripshifters, that would be the first to be upgraded.
The 1998 catalog shows the 730 as being equipped with a combination of Acera and Alivio, which were still not high-end, but better than Altus.
The 1998 catalog shows the 730 as being equipped with a combination of Acera and Alivio, which were still not high-end, but better than Altus.
#97
Newbie
Thread Starter
#98
Newbie
Thread Starter
#99
Newbie
Thread Starter
Yup grips gotta go. I think I have a suntour 7 speed thumbie and a deore dx front 3 thumbies lying around, I’ll read into compatibility. Going to go see it tonight again and see if he’ll take less. It’s kind of neat in the way that it’s the end of an era
#100
Senior Member
My guess is that if he's asking $200, it's been on the market for a while, is that right? It's a good frame to build up, but you'll spend some money if a lot of things need replacing, especially wheels. I'd offer him $100.