Park grease
#1
Senior Member
Thread Starter
Join Date: Jul 2015
Location: Seal Beach Ca. On the right , next to Long Beach
Posts: 1,814
Bikes: 86' Centurion Ironman
Liked 317 Times
in
176 Posts
Park grease
What is the difference between PPL-1 and PPL-2 And what is BF's preference for all steel vintage grease ?
Mark .
Mark .
Last edited by markwesti; 08-14-23 at 07:06 PM.
#3
Not lost wanderer.
I have an old grease gun refill that is dipped into for threads and other junk but bearings and other rolling parts get Park grease. PPL-1 is in a tube and PPL-2 is a tub both contain Poly Lube 1000
__________________
72 Geoffery Butler, 72 Guficatizion Witcomb, 72 Raleigh Gran Sport SS, 73 Raleigh Super Course dingle speed, 74 Raleigh international, 81 Centurion Pro-Tour, 74 Gugie Grandier Sportier, 85 Gazelle Primeur, 29rBMX, Surley Steamroller 650b
72 Geoffery Butler, 72 Guficatizion Witcomb, 72 Raleigh Gran Sport SS, 73 Raleigh Super Course dingle speed, 74 Raleigh international, 81 Centurion Pro-Tour, 74 Gugie Grandier Sportier, 85 Gazelle Primeur, 29rBMX, Surley Steamroller 650b
Likes For bwilli88:
#4
Senior Member
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,995
Bikes: old ones
Liked 10,458 Times
in
7,255 Posts
Likes For 3alarmer:
Likes For thinktubes:
#6
señor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 6,731
Bikes: '70s - '80s Campagnolo
Liked 6,997 Times
in
3,447 Posts
Likes For SurferRosa:
#7
Senior Member
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,995
Bikes: old ones
Liked 10,458 Times
in
7,255 Posts
Likes For 3alarmer:
#8
Senior Member
Join Date: May 2010
Location: Bastrop Texas
Posts: 4,771
Bikes: Univega, Peu P6, Peu PR-10, Ted Williams, Peu UO-8, Peu UO-18 Mixte, Peu Dolomites
Liked 1,847 Times
in
1,184 Posts
Oh... Grease not Geese...
__________________
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
Likes For zandoval:
#9
Senior Member
Join Date: May 2010
Location: Bastrop Texas
Posts: 4,771
Bikes: Univega, Peu P6, Peu PR-10, Ted Williams, Peu UO-8, Peu UO-18 Mixte, Peu Dolomites
Liked 1,847 Times
in
1,184 Posts
#10
Senior Member
My preference is cheap, so I use marine grease and I haven't found it to be lacking.
I would like to try out 'Green Oil' brand Ecogrease at some point, it doesn't use PTFE or petroleum-based ingredients. Costly product, but as an environmentalist I feels it's prudent to change where I can.
https://www.green-oil.net/Ecogrease.html
I would like to try out 'Green Oil' brand Ecogrease at some point, it doesn't use PTFE or petroleum-based ingredients. Costly product, but as an environmentalist I feels it's prudent to change where I can.
https://www.green-oil.net/Ecogrease.html
#11
Red 'N' Tacky grease from Lucas Oil from Home Depot. This is my go-to grease for bikes, cars, and everything. Best grease to repack ball bearings. Economical and effective.
https://www.homedepot.com/p/Lucas-Oi...0005/202521504
https://www.homedepot.com/p/Lucas-Oi...0005/202521504
Likes For Eyes Roll:
#12
Full Member
Join Date: Oct 2022
Location: UK, New Forest
Posts: 320
Bikes: 1980 Gitane sprint,1977 Motobécane C4, 1977 Carlton Clubman, 1959 Claud Butler European
Liked 148 Times
in
95 Posts
My preference is cheap, so I use marine grease and I haven't found it to be lacking.
I would like to try out 'Green Oil' brand Ecogrease at some point, it doesn't use PTFE or petroleum-based ingredients. Costly product, but as an environmentalist I feels it's prudent to change where I can.
https://www.green-oil.net/Ecogrease.html
I would like to try out 'Green Oil' brand Ecogrease at some point, it doesn't use PTFE or petroleum-based ingredients. Costly product, but as an environmentalist I feels it's prudent to change where I can.
https://www.green-oil.net/Ecogrease.html
However, try ballistol. Get the 1kg tin, it is really good grease and no ptfe.£15 for a kg.Try the oil, wonderful, actually good for your skin.“Ballistol univeral multi-purpose grease is stable in a temperature range from -30° C to +120° C and is also characterized by a very good water resistance. Ballistol, providing reliable long-term lubrication and good sealing properties and easy pumpability in central lubrication systems.
Ballistol Multi-purpose grease is resistant in wet and dusty environments as well as in cold and hot water. In combination with its good adhesion and oxidation resistance it also protects in such problematic areas safe from corrosion.
Ballistol Multi-purpose grease reduces the friction and wear of all moving parts and has a high load carrying capacity. Ballistol is also aging resistant and drum stable and resistant to dust and water. The multi-purpose grease is silicone-free, resin-free and acid-free and therefore it does not resinify”.
Likes For awac:
#13
Senior Member
As a member of the cycling community, you have an obligation to support the industry by buying overpriced specialty "bicycle" grease, instead of just buying a big tub of marine grease, Lucas Red 'N' Tacky, or just about any generic waterproof wheel bearing grease.
Likes For Colorado Kid:
#15
Senior Member
What the…? You mean I don’t have to lube my Dura Ace bits with Dura Ace Special Grease? Next I suppose you’re going to tell me I can put Quaker State in my Buick.
#16
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,951
Bikes: A bunch of old bikes and a few new ones
Liked 4,321 Times
in
2,381 Posts
Yeah Park grease is overpriced but it looks nice next to all my overpriced Park tools and Park stand. Sort of like a bike gruppo, right?
Likes For bikemig:
#17
Senior Member
Who here is still using whale blubber?
Likes For nlerner:
Likes For RustyJames:
#19
Senior Member
Thread Starter
Join Date: Jul 2015
Location: Seal Beach Ca. On the right , next to Long Beach
Posts: 1,814
Bikes: 86' Centurion Ironman
Liked 317 Times
in
176 Posts
Thanks , I just bought a new tube of PPL-1 . I saw the PPL-2 and that got me wondering . About the controversy , I know . I made popcorn .
Last edited by markwesti; 08-15-23 at 10:25 AM.
Likes For markwesti:
#20
big fan of Lucas red for car and bike. Although a bit ago I found this military can of Vietnam war era grease so that's what I am currently using.
The most important thing about grease is not what brand you use but that you actually repack it on a regular basis. The best grease in the world that you leave on the bottom bracket for twenty years can't compete with the cheapest grease in the world that you repack every year.
Likes For abdon:
#21
Senior Member
Thread Starter
Join Date: Jul 2015
Location: Seal Beach Ca. On the right , next to Long Beach
Posts: 1,814
Bikes: 86' Centurion Ironman
Liked 317 Times
in
176 Posts
Red 'N' Tacky grease from Lucas Oil from Home Depot. This is my go-to grease for bikes, cars, and everything. Best grease to repack ball bearings. Economical and effective.
https://www.homedepot.com/p/Lucas-Oi...0005/202521504
https://www.homedepot.com/p/Lucas-Oi...0005/202521504
#22
Senior Member
At the risk of dumping butter on the popcorn, I believe that Park Poly and Lucas X-tra heavy duty is the same. Maybe it's slightly tweaked so the people at Park can say it's bicycle specific and still sleep at night. C'mon man, it's only grease.
#23
Senior Member
Likes For nlerner:
#24
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,883
Liked 4,049 Times
in
2,756 Posts
Okay, yeah, just checked. I bought the tub in 2017 for $15.28, now it's over $28.
I used to get Phil grease, but they are really proud of the stuff nowadays.
It's just a lithium grease. Not good for keeping a seatpost from getting stuck.
#25
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 10,387
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Liked 3,489 Times
in
1,825 Posts
I stick to phil's a tube last a long time.
and in general grease and lubricants are cheap for volume used. I don't understand all the people who are trying to save pennies on non bike specific grease and lube. I have never had a bike use quarts of grease and change lube
and in general grease and lubricants are cheap for volume used. I don't understand all the people who are trying to save pennies on non bike specific grease and lube. I have never had a bike use quarts of grease and change lube
__________________
Life is too short not to ride the best bike you have, as much as you can.
Life is too short not to ride the best bike you have, as much as you can.