When a threaded steerer is too long...
#1
When a threaded steerer is too long...
I've just built 2 bikes where I barely had enough steerer to put a new headset on. Now I have the opposite problem. I am using Paul Mini-Moto V brakes on this bike and do not need the cantilever brake cable stop, which is quite thick. Without it I can not snug the locknut down. The fork is a real nice old Ritchey that's even signed by its maker (!) so I'm a bit loathe to cut it. What does one do?
#2
Senior Member
There are plenty of various sized 1" spacers out there or you could cut your own if you had the means.
Likes For nlerner:
#5
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,713
Bikes: It's complicated.
Liked 6,009 Times
in
2,340 Posts
Which brings up another point, it's a good idea to post your location, you could make some new friends with tools and knowledge to help you out.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#8
Senior Member
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 6,060
Bikes: 1989 Cinelli Supercorsa
Liked 3,107 Times
in
1,875 Posts
Just remember, it's much easier to cut the steerer than add metal back on. I'd use a spacer, myself.
Likes For smd4:
#9
Spacers cost only pennies on eBay and come in a multitude of thicknesses and colors
#10
Senior Member
If you want to hide the spacer, tap it for a bell:
Likes For nlerner:
#11
verktyg
Headset Spacers
I've just built 2 bikes where I barely had enough steerer to put a new headset on. Now I have the opposite problem. I am using Paul Mini-Moto V brakes on this bike and do not need the cantilever brake cable stop, which is quite thick. Without it I can not snug the locknut down. The fork is a real nice old Ritchey that's even signed by its maker (!) so I'm a bit loathe to cut it. What does one do?
IMO the right thing to do is cut down the steerer, but that requires a modicum of skill and proper tools. But you only need to cover a few threads. If you were in the greater Portland area I'd tell you to swing by, I have a lot of spacers I'd give you. Search for headset spacer 1", you'll find many online sources, or just go down to your LBS.
VERY SIMPLE SOLUTION... Headset spacers, been used for years. Common issue BITD when folks switched from center pulls to side pulls. Back then nice polished chrome plated spacers were hard to get so people used black or silver stamped steel spacers.
As gugie mentioned nice aluminum spacers are readily available in black or silver in 1mm, 1.5mm, 2mm, 3mm, 4mm and so on.
7 threads of engagement provide the maximum strength in most threaded applications. I like to use a minimum of 5 threads or 5 rotations on headsets.
1" keyed spacers for classic British or Italian headsets. BTW, I stopped using these because they tear up the threads when they rotate out of the keyway slot in the steerer while tightening. Use a pair of spacers without the keyway tang (file it out or just use the aluminum spacers).
25mm spacers with a flat for French & metric headsets. Those steerers have a flat cut or ground on the top threads.
1983 Trek from the factory with multiple spacers.
3 each 2mm spacers.
Frames made after threadless headsets became popular tend to have longer than necessary steerers. Striped black & silver spacers on a long steerer. I don't cut them off unless absolutely necessary because down the road, may not be able to get a proper fitting threaded headset.
Headset Stack Height measurements.
Easy way to measure the steerer to determine Stack Height capacity. This steerer has about 40mm of capacity.
verktyg
__________________
Don't believe everything you think! History is written by those who weren't there....
Chas. ;-)
Don't believe everything you think! History is written by those who weren't there....
Chas. ;-)
Likes For verktyg:
#12
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,886
Bikes: Yes
Liked 4,117 Times
in
1,528 Posts
I'd also vote for a spacer. As you have seen first hand, changing a headset and discovering you don't have enough stack is very frustrating. Doing so and discovering you need a spacer is much less so. In this case, cutting the steerer would prevent you from switching back to brakes that need a hanger.
I've got a few bikes with a pretty big spacer in the headset. Just low end bikes like LeMond, Stella, and Colnago though.
Here's the Colnago. Curiously, this one doesn't even have the usual keyed washer. Plenty of room for one, obviously. I don't think the steerer even has a slot for it. I guess Colnago just decided people should know how to adjust the headset without relying on such a crutch.
Lucky for me, [MENTION=381793]gugie[/MENTION] didn't notice the spacer on the Stella when it was in the Atelier for other modifications.
I've got a few bikes with a pretty big spacer in the headset. Just low end bikes like LeMond, Stella, and Colnago though.
Here's the Colnago. Curiously, this one doesn't even have the usual keyed washer. Plenty of room for one, obviously. I don't think the steerer even has a slot for it. I guess Colnago just decided people should know how to adjust the headset without relying on such a crutch.
Lucky for me, [MENTION=381793]gugie[/MENTION] didn't notice the spacer on the Stella when it was in the Atelier for other modifications.
__________________
My Bikes
My Bikes
Likes For Andy_K:
#13
Senior Member
Join Date: May 2019
Location: Burien WA
Posts: 546
Bikes: Cannondale Synapse, LeMond Victoire, Bianchi Campione d'Italia, Kona Hei Hei, Ritchey Ultra, Schwinn "Paramount" PDG, '83 Trek 640
Liked 363 Times
in
228 Posts
In general, I think it's a good idea to have at least a few mm of spacers so that you can potentially switch to a different headset at some point in the future if you need to. That way, you're not locked into looking for the same stack height or shorter when you're shopping for that next headset.
So a spacer is my vote. It's slightly more elegant to have a single spacer that's the right height, but no one should get on your case if you have two or three spacers in there.
So a spacer is my vote. It's slightly more elegant to have a single spacer that's the right height, but no one should get on your case if you have two or three spacers in there.
Likes For mhespenheide:
#14
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,713
Bikes: It's complicated.
Liked 6,009 Times
in
2,340 Posts
The new Gugificazione business model:
I'm thinking of changing my name to Sylvester McMonkey McBean
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
Likes For gugie:
#15
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 10,056
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Liked 3,055 Times
in
1,647 Posts
Hey, I'm retired from my old day job now, and the queue at the Atelier is getting shorter as a result. Cut down steerers may be too short in the future, at which point I can charge for a new steerer.
The new Gugificazione business model:
I'm thinking of changing my name to Sylvester McMonkey McBean
The new Gugificazione business model:
I'm thinking of changing my name to Sylvester McMonkey McBean
__________________
Life is too short not to ride the best bike you have, as much as you can.
Life is too short not to ride the best bike you have, as much as you can.
Likes For squirtdad:
#16
Senior Member
Join Date: Oct 2020
Location: Phoenix, AZ
Posts: 959
Bikes: 1964(?) Frejus Tour de France, 1967(?) Dawes Double Blue, 1979 Trek 710, 1982 Claud Butler Dalesman, 1983 Schwinn Paramount Elite, 2014 Brompton, maybe a couple more
Liked 700 Times
in
344 Posts
McBean was a piker. It's not a truly modern business model unless you can get the customers to pay you every month for the rest of their lives for the privilege of using the intellectual property associated with the cut down steerer.
Likes For albrt:
#17
Full Member
Just went through the same issue. Had to order some spacers. I have a few extras. PM me with your thickness , I can send you one if one of them fits. I think they range from 3-7mm. On the road at the moment. Will confirm when I get home Monday.
Likes For tmnguuyen:
#18
Crawlin' up, flyin' down
Join Date: Jan 2006
Location: Democratic Peoples' Republic of Berkeley
Posts: 5,755
Bikes: 1967 Paramount; 1982-ish Ron Cooper; 1978 Eisentraut "A"; two mid-1960s Cinelli Speciale Corsas; and others in various stages of non-rideability.
Liked 2,659 Times
in
1,115 Posts
Not a close call in my mind: get the spacer(s). I would not cut anything off that steerer - there is nowhere near enough margin for error in my book. Another advantage of the spacer: it lets you get the stem a little higher than if you cut it. There will come a time when that matters, even of it only a difference of a few millimeters. Don't ask me how I know.
__________________
"I'm in shape -- round is a shape." Andy Rooney
"I'm in shape -- round is a shape." Andy Rooney
Likes For bikingshearer:
#19
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,713
Bikes: It's complicated.
Liked 6,009 Times
in
2,340 Posts
Hmm, I already have a publicist, sounds like I need a business manager.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
Likes For gugie:
#20
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,713
Bikes: It's complicated.
Liked 6,009 Times
in
2,340 Posts
Not a close call in my mind: get the spacer(s). I would not cut anything off that steerer - there is nowhere near enough margin for error in my book. Another advantage of the spacer: it lets you get the stem a little higher than if you cut it. There will come a time when that matters, even of it only a difference of a few millimeters. Don't ask me how I know.
Now a production bike probably doesn't have this issue, but there were plenty of replacement forks sold BITD with very long threaded areas on the steerer. This allowed a bike shop to stock just one replacement fork - a safety issue in my mind.
Now, with the OP's few mm of headset threads to cover, it's highly unlikely that this would be an issue, and I agree that spacers would almost assuredly be fine. I just don't want everyone having the takeaway that you can just put a spacer in without thinking of where the expander bolt will hit - and it better be completely below the threaded area.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
Likes For gugie:
#21
Senior Member
Likes For smontanaro:
#22
Crawlin' up, flyin' down
Join Date: Jan 2006
Location: Democratic Peoples' Republic of Berkeley
Posts: 5,755
Bikes: 1967 Paramount; 1982-ish Ron Cooper; 1978 Eisentraut "A"; two mid-1960s Cinelli Speciale Corsas; and others in various stages of non-rideability.
Liked 2,659 Times
in
1,115 Posts
Raising the stem higher by using headset spacers isn't a good idea. It's a false sense of security thinking that as long as the little max height line on the stem isn't exposed above the headset, you're good. I've seen people use fairly tall spacers to "enable" bringing the stem up higher, when in fact it may just bring the expander plug up into the threaded area. And I'll tell you how I know people do this - I've replaced several steerers with this exact issue where the threaded area was either bunged up or broken off completely. I even documented it on this site for a Paramount steerer repair for [MENTION=401497]RiddleOfSteel[/MENTION] who found the frame and fork up at the co-op he volunteers at.
Now a production bike probably doesn't have this issue, but there were plenty of replacement forks sold BITD with very long threaded areas on the steerer. This allowed a bike shop to stock just one replacement fork - a safety issue in my mind.
Now, with the OP's few mm of headset threads to cover, it's highly unlikely that this would be an issue, and I agree that spacers would almost assuredly be fine. I just don't want everyone having the takeaway that you can just put a spacer in without thinking of where the expander bolt will hit - and it better be completely below the threaded area.
Now a production bike probably doesn't have this issue, but there were plenty of replacement forks sold BITD with very long threaded areas on the steerer. This allowed a bike shop to stock just one replacement fork - a safety issue in my mind.
Now, with the OP's few mm of headset threads to cover, it's highly unlikely that this would be an issue, and I agree that spacers would almost assuredly be fine. I just don't want everyone having the takeaway that you can just put a spacer in without thinking of where the expander bolt will hit - and it better be completely below the threaded area.
Yes, this is a trick question. If your answer is anything other than a resounding "gugie." I have a bridge in Brooklyn up for sale on reasonable terms.
__________________
"I'm in shape -- round is a shape." Andy Rooney
"I'm in shape -- round is a shape." Andy Rooney
Likes For bikingshearer:
#23
Senior Member
As I'm learning, it can be quite tall without being a visual problem. When I built the frame, Doug Fattic said, "I want you to still be able to ride the bike in ten years" (or words to that effect). Accordingly, it has a small extension (~10mm) on the head tube lug, and the steerer tube is a bit long, necessitating some spacers (a plain spacer and a Paul Funky Monkey). After I go to my eternal reward, the next custodian of the bike can cut things down if they want.
one can tell the guidance of a master builder, terrific fender lines.
#24
Senior Member
I was surprised at how easily the fenders went on the bike. (With plastic fantastic adjustable fenders I've always just stopped fiddling when the fenders stopped rubbing the tires. ) I'm sure a lot of the credit for that goes to Doug for proper placement of the three mounting points.