I finally finished my 1946 Holdsworth Cyclone
#1
Full Member
Thread Starter
Join Date: May 2023
Location: Big Sur California
Posts: 234
Bikes: 1946 Holdsworth Cyclone, 1969 Cinelli SC, 1972 Raleigh Pro, 1973 Merz road bike, 1974 Alex Singer Sportif, 1974 Merz track bike, 1975 Teledyne Titan, 1976 Ritchey road bike, 1977 DiNucci built Merz track bike, 1977 (?) Exxon Graftek, many more!
Liked 1,498 Times
in
186 Posts
I finally finished my 1946 Holdsworth Cyclone
I just finished the final assembly of my 1946 Holdsworth project. I've been working on it for about 6 months! This is a vanity bike, made the same year I was born. A stupid amount of work, I made or totally rebuilt almost every component. The parts are not perfecly period correct, but I want this bike to work. It does! More photos later. Jim Merz
Last edited by Portlandjim; 12-17-23 at 05:53 PM. Reason: add a comment
Likes For Portlandjim:
1989Pre, Aardwolf, bargo68, bboy314, BTinNYC, bulgie, cegerer, cinelliguy, cycleheimer, daverup, delbiker1, djkashuba, dphi, droppedandlost, ehcoplex, IdahoBrett, JoeBass, John E, Kekec1965, Kilroy1988, machinist42, Mad Honk, merziac, mpetry912, mtbikerjohn, Nemosengineer, non-fixie, northbend, PilotFishBob, Pompiere, qcpmsame, retroman57, roadcrankr, Robvolz, Sactown_Albert, sced, Small cog, squirtdad, steelbikeguy, SurferRosa, SwimmerMike, thinktubes, tiger1964, tjfastback66, USAZorro, zookster
#2
Senior Member
Nice Sprints.
did you exchange the top portion of the rear mech to have the double spring?
Steel stem and post very much are visually in keeping with the period.
did you exchange the top portion of the rear mech to have the double spring?
Steel stem and post very much are visually in keeping with the period.
#3
Senior Member
Bravo, sir! It looks exceedingly functional with a relatively period-correct look overall. You've achieved a commendable balance between form and function. The photo is saved to my Holdsworth files for future reference!
-Gregory
-Gregory
Likes For Kilroy1988:
#4
Full Member
Thread Starter
Join Date: May 2023
Location: Big Sur California
Posts: 234
Bikes: 1946 Holdsworth Cyclone, 1969 Cinelli SC, 1972 Raleigh Pro, 1973 Merz road bike, 1974 Alex Singer Sportif, 1974 Merz track bike, 1975 Teledyne Titan, 1976 Ritchey road bike, 1977 DiNucci built Merz track bike, 1977 (?) Exxon Graftek, many more!
Liked 1,498 Times
in
186 Posts
No double spring on the Gan Sport rear derailleur. I did modify it though. For riding the longer courses in Eroica and avoiding walking, I found that I need a low gear using a 27t rear and a 36t front. I can get this to work with a late version Super Record rear derailleur if the high gear cogs are 14t and 47t. This bike has a Gran Sport rear from the early 1950's, and will not handle this range of gear stock. I modified a SR pully cage to fit on the GS. I had to use a Record spring stop, and I had to modify the upper pivot limit stop. The derailleur angles forward instead of being almost vertical. I also included a pair of my modified Enduro pulleys. The result is it shifts all the gears nicely. The front derailleur is a Cyclo Benlux rod shifter. It was used, I made new parts to reduce all the slop. This works very well also. The stem is a period correct GB Kromo, it's excellent. Bars are aluminum GB. The seat post is period correct, an aluminum Titan. The pedals are period correct Holdworth Allez, very rare. They were hardly used. The clip headset is also a Holdworth Allez item, it came with the frame. The original bearing design, Chater Lea intigrated races, really doesn't work very well. I modifed the lugs to accecpt modern sealed drop in 1" bearings. I remade all the headset parts, they look just like the original but work much better. The crank arms are Chater Lea, with double chainrings made by me with Holdworth Allez design. The saddle is a 1950's B17 that has been modifed for use by a pro racer back in the day. The hubs are Airlite, made by me. The QR's are original Airlite period correct. Brakes are Ballila side pull, Holdworth used brakes from this Italian company starting before WWII. I made amost all the hardware for them. This frame was originally made for use with tubular wheels! I used a pair of 1950's Weinmann rims.Jim
Last edited by Portlandjim; 12-17-23 at 06:44 PM. Reason: addition
Likes For Portlandjim:
Likes For Robvolz:
#6
Semper Fi
Beautifully executed bike, well done sir on all of your handwork and building the Holdsworth for use. Best of luck on the Eroicas you undertake.
Bill
Bill
__________________
Semper Fi, USMC, 1975-1977
I Can Do All Things Through Him, Who Gives Me Strength. Philippians 4:13
Semper Fi, USMC, 1975-1977
I Can Do All Things Through Him, Who Gives Me Strength. Philippians 4:13
Likes For qcpmsame:
#7
Senior Member
Join Date: Jul 2007
Location: Manhattan & Woodstock NY
Posts: 2,947
Bikes: 2024 A Homer Hilsen, 1987 Mercian Pro, 1985 Shogun 500, early '70s Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Raleigh International, 1971 Peugeot PX-10, 1970 Raleigh Professional Mk1
Liked 3,569 Times
in
1,105 Posts
That's a damn handsome build, Jim. Bravo!
__________________
2024 A Homer Hilsen, 1987 Mercian Pro, 1985 Shogun 500, 197? Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Peugeot PX-10, 1971 Raleigh International, 1970 Raleigh Professional Mark I
Curator/Team Mechanic: 2016 Dawes Streetfighter, 1984 Lotus Eclair, 1975 Motobecane Jubile Mixte, 1974 Raleigh Sports, 1973 Free Spirit Ted Williams, 1972 Raleigh Super Course, 1971 Philips Sport
2024 A Homer Hilsen, 1987 Mercian Pro, 1985 Shogun 500, 197? Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Peugeot PX-10, 1971 Raleigh International, 1970 Raleigh Professional Mark I
Curator/Team Mechanic: 2016 Dawes Streetfighter, 1984 Lotus Eclair, 1975 Motobecane Jubile Mixte, 1974 Raleigh Sports, 1973 Free Spirit Ted Williams, 1972 Raleigh Super Course, 1971 Philips Sport
#8
The Wheezing Geezer
Join Date: Oct 2021
Location: Española, NM
Posts: 1,266
Bikes: 1976 Fredo Speciale, Rivendell Clem Smith Jr., Libertas mixte
Liked 1,140 Times
in
542 Posts
Lovely.
There is something to be said for the absence of 'patina', otherwise known as 'wear and tear'.
Congratulations!
There is something to be said for the absence of 'patina', otherwise known as 'wear and tear'.
Congratulations!
__________________
Beneath the valley of the underbikers.
Beneath the valley of the underbikers.
Likes For Fredo76:
#9
Senior Member
Hard to beat the elegance of those fork blades. I bet it's a very comfortable bike.
#10
Crawlin' up, flyin' down
Join Date: Jan 2006
Location: Democratic Peoples' Republic of Berkeley
Posts: 5,903
Bikes: 1967 Paramount; 1982-ish Ron Cooper; 1978 Eisentraut "A"; two mid-1960s Cinelli Speciale Corsas; and others in various stages of non-rideability.
Liked 2,913 Times
in
1,220 Posts
Beautiful. Just beautiful.
__________________
"I'm in shape -- round is a shape." Andy Rooney
"I'm in shape -- round is a shape." Andy Rooney
Likes For bikingshearer:
Likes For Aardwolf:
#12
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 7,561
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Liked 3,590 Times
in
2,254 Posts
How the heck do you machine all of those different parts?!?! The head lugs look super cool.
Did you paint or send that out for paint. The lug lining and pinstripe work looks awesome!
Stunning little bike.
Did you paint or send that out for paint. The lug lining and pinstripe work looks awesome!
Stunning little bike.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
#13
Standard Member
Join Date: Apr 2009
Location: Brunswick, Maine
Posts: 4,350
Bikes: 1948 P. Barnard & Son, 1962 Rudge Sports, 1963 Freddie Grubb Routier, 1980 Manufrance Hirondelle, 1983 F. Moser Sprint, 1989 Raleigh Technium Pre, 2001 Raleigh M80
Liked 1,055 Times
in
524 Posts
The gold lug-lining tops it all off really well. Although later, the Benelux rod is a great addition. It is interesting that it negotiates a jump from 47T to 36T.
Were the brake-lever hoods hard to make?
Were the brake-lever hoods hard to make?
__________________
"Chim-chiminey, chim-chiminey, chim-chim cheroo"
"Chim-chiminey, chim-chiminey, chim-chim cheroo"
Last edited by 1989Pre; 12-19-23 at 05:39 AM. Reason: Cyclo rod-operated f.d. offered in 1953?
Likes For 1989Pre:
#14
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,973
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Liked 1,472 Times
in
912 Posts
Your customized rear derailleur is giving me ideas for one of the Capo Siegers. I really like what you have done. You are right about your front derailleur being rare -- I have seen only one other, at the Cunninghams' old CyclArt shop in Vista CA.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
Likes For John E:
#15
That's quite nice, sir.
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
#16
Polymultiplié
Join Date: Aug 2009
Location: South Holland, NL
Posts: 11,227
Bikes: Yes, please.
Liked 5,242 Times
in
1,929 Posts
Shall we be seeing you in Gaiole next year?
Likes For non-fixie:
#17
Full Member
Thread Starter
Join Date: May 2023
Location: Big Sur California
Posts: 234
Bikes: 1946 Holdsworth Cyclone, 1969 Cinelli SC, 1972 Raleigh Pro, 1973 Merz road bike, 1974 Alex Singer Sportif, 1974 Merz track bike, 1975 Teledyne Titan, 1976 Ritchey road bike, 1977 DiNucci built Merz track bike, 1977 (?) Exxon Graftek, many more!
Liked 1,498 Times
in
186 Posts
I chose some parts that are a bit later than the frame build date, but only if they offered a way to allow the functionality I needed. Many riders back in those days changed parts as superior versions became available, the parts I added aren't out of the question. The Benilux front derailleur I used has a cage design very similar to Campagnolo GS/NR/SR. The key to having it work with a 36 inner chainring is the tooth count jump. 11 teeth is what I found to be the limit for acceptable front shifting with the Campagnolo front derailleurs, it was also true with the Benilux I have. So, the big ring is only 47 teeth. This makes a rather low high gear, but I'm old and can't average 25 MPH these days! The brake levers were NOS and came with the hoods. Balilla brakes, which were the first aluminum brakes offered for sale, were listed in the Holdworth catalogs even before WWII. The model I got are for sure newer, but the design of the calipers are very similar to the early version side pull. The design of the caliper is very similar to Campagnolo Record, with a quick release that works slightly differently. I wanted a side pull brake with a QR and these fit the bill. However, the construction details were hideous. Pivot holes that were punched, bores pointing off in random directions. Pivot shafts with diameters that had no relation to the bores they rode in. So, I made all the hardware using bronze bushes for pivots. Everything optimized for correct clearance. Weeks worth of work for just the brakes! It turns out that the lever cable pull ratio was really poor, the brakes felt solid but required superman's hands to stop. I am pretty sure Tuillo looked at these brakes when he was designing his Record brake. The lever blade on the Ballila is very similar to the Record blade, but has a much better pivot position. With much work I modified the lever bodies to allow Record blades to be installed. I stripped the anodize off, filed the Campy name off and polished the blades. I have yet to ride them, but the cable pull ratio is much better now. Campy Record brakes require a lot of muscle to stop, but the way the Ballila levers were before was much worse.
Last edited by Portlandjim; 12-18-23 at 09:18 AM.
Likes For Portlandjim:
#18
Full Member
Thread Starter
Join Date: May 2023
Location: Big Sur California
Posts: 234
Bikes: 1946 Holdsworth Cyclone, 1969 Cinelli SC, 1972 Raleigh Pro, 1973 Merz road bike, 1974 Alex Singer Sportif, 1974 Merz track bike, 1975 Teledyne Titan, 1976 Ritchey road bike, 1977 DiNucci built Merz track bike, 1977 (?) Exxon Graftek, many more!
Liked 1,498 Times
in
186 Posts
#19
The Huffmeister
Join Date: Jul 2008
Location: The Le Grande HQ
Posts: 3,132
Bikes: Gängl, Trek 938, Raleigh Professional, Paramount, Allez, Guerciotti, Specialized Stumpjumper, Trek 750, Miyata 1000 < Huffy
Liked 4,008 Times
in
1,618 Posts
Likes For AdventureManCO:
#20
Crawlin' up, flyin' down
Join Date: Jan 2006
Location: Democratic Peoples' Republic of Berkeley
Posts: 5,903
Bikes: 1967 Paramount; 1982-ish Ron Cooper; 1978 Eisentraut "A"; two mid-1960s Cinelli Speciale Corsas; and others in various stages of non-rideability.
Liked 2,913 Times
in
1,220 Posts
Likes For bikingshearer:
#21
Polymultiplié
Join Date: Aug 2009
Location: South Holland, NL
Posts: 11,227
Bikes: Yes, please.
Liked 5,242 Times
in
1,929 Posts
It would! Think of the audience you'd have there ...
Anyway, I'd have loved to see it in the metal. Did I say it's beautiful?
Anyway, I'd have loved to see it in the metal. Did I say it's beautiful?
#22
Standard Member
Join Date: Apr 2009
Location: Brunswick, Maine
Posts: 4,350
Bikes: 1948 P. Barnard & Son, 1962 Rudge Sports, 1963 Freddie Grubb Routier, 1980 Manufrance Hirondelle, 1983 F. Moser Sprint, 1989 Raleigh Technium Pre, 2001 Raleigh M80
Liked 1,055 Times
in
524 Posts
They do go for a bit of cake.., when available. Jim has the early cage, too. His says Cyclo-Made in England. The later ones just say Benelux in larger font. The earlier ones are panto-graphed, where-as the later ones just have the name stamped in. These mechs are enjoyable and reliable. They give a very sure shift (for those of us fatigued or just clumsy-at-times).., and, speaking of clumsy, one needn't worry about his finger(s) bouncing off his spokes during an attempted f.d. shift.
__________________
"Chim-chiminey, chim-chiminey, chim-chim cheroo"
"Chim-chiminey, chim-chiminey, chim-chim cheroo"