Centurion Semi Pro
#1
Centurion Semi Pro
I found another Centurion Semi Pro on the local FB marketplace and picked it up 2 nights ago. It will need the usual going through of all of the bearings ( all of the rotating parts are pretty stiff and gummed up). That should keep me busy on some of these long dark nights in the far Northwest.
The paint on this one has a lot of scuffs and scratches. I could touch up the cobalt blue color, but the frame is entirely chromed under the paint, so wondering how this might look stripped and polished?
It’s pretty much original with the exception of that funky seat. Stem and seatpost came right out despite both having been bottomed out before the bike got to me.
Opinions on touch-up vs strip and polish the frame? Suggestions on an appropriate saddle? Thanks!
A few photos:
Scratches galore
The paint on this one has a lot of scuffs and scratches. I could touch up the cobalt blue color, but the frame is entirely chromed under the paint, so wondering how this might look stripped and polished?
It’s pretty much original with the exception of that funky seat. Stem and seatpost came right out despite both having been bottomed out before the bike got to me.
Opinions on touch-up vs strip and polish the frame? Suggestions on an appropriate saddle? Thanks!
A few photos:
Scratches galore
Last edited by orcas island; 01-04-24 at 05:53 PM.
Likes For orcas island:
#2
Senior Member
Join Date: Jul 2015
Location: Seal Beach Ca. On the right , next to Long Beach
Posts: 1,814
Bikes: 86' Centurion Ironman
Liked 317 Times
in
176 Posts
Nice bike , my vote is to touch up the paint . For the saddle a Selle . Supercorsa , Turbo , Rolls ?
https://sellesanmarco.com/saddles/bottega/
https://sellesanmarco.com/saddles/bottega/
#3
Senior Member
-----
congratulations on another very nice find!
chrome -
a big part of what makes it shiny is the polishing done before plating
there be precious little polishing post-plating can accomplish
when the manufacturer will be painting the frame they do no polish the areas which will be painted prior to plating
me two yen would be to not remove paint
shall look forward to following along
say hello to Cloris L. & Dee W.-S. for us the next time you see them gliding by in Cloris' antique white Jaguar
-----
congratulations on another very nice find!
chrome -
a big part of what makes it shiny is the polishing done before plating
there be precious little polishing post-plating can accomplish
when the manufacturer will be painting the frame they do no polish the areas which will be painted prior to plating
me two yen would be to not remove paint
shall look forward to following along
say hello to Cloris L. & Dee W.-S. for us the next time you see them gliding by in Cloris' antique white Jaguar
-----
Last edited by juvela; 01-05-24 at 09:53 AM. Reason: addition
#5
Senior Member
Not much needs to be done but clean up and make it yours. These are very nice bikes. I love the crank and Cyclone derailleurs. The glaring downside , and perhaps the only downside , is that saddle.
#7
Senior Member
Join Date: Aug 2020
Location: Saratoga, CA
Posts: 947
Bikes: 1981 Bianchi Specialissima, 1971 Bob Jackson. 2012 Kestrel 4000. 2012 Willier. 2016 Fuji Cross 1.1, 1950 Hetchins, 194X James Fothergill, 1971 Paramount P15, 1973 Paramount P12, 1963 Legnano
Liked 1,155 Times
in
450 Posts
Nice find! My first real road bike was the a Centurion Super Le mans, I really wanted the Semi Pro but it ws out of my budge. Enjoy.
#8
In your place, I'd do everything within reason to save the original finish. But then, I'm a sucker for lug lining and pinstriping, and if you wanted to duplicate that in a refinish job it'd cost an arm and a leg.
SP
Newport OR
SP
Newport OR
Likes For rando_couche:
#9
Nice pick up, I don't recall ever seeing those MKS Unique Royal pedals (I at some point would like to build a bike with as much SR Royal as possible lol). I would keep the paint and polish. I'm not into touch ups but if you can a match I don't see a reason not to.
#10
Senior Member
I have seen a stripped semi-pro and it looked pretty decent. The chrome was not polished under the paint but it just ends up looking matte- which can actually be a good thing as the polished bits still stand out in contrast.
I think most people would say leave it but in person if it's all banged up...
I think most people would say leave it but in person if it's all banged up...
#11
Senior Member
That pinstriping is one of the biggest attractors for me on these models as well as the pro tour of the same era. The paint is mostly there. Wash, scratch-x polish, wax and some touch ups here and there if you feel the need.
#12
Forum Moderator
Join Date: Jul 2007
Location: Kalamazoo MI
Posts: 21,172
Bikes: Fuji SL2.1 Carbon Di2 Cannondale Synapse Alloy Viscount Aerospace Pro Raleigh C50 Cromoly Hybrid Legnano Tipo Roma Pista
Liked 7,514 Times
in
4,198 Posts
I had a pearl yellow Semi Pro for a while. Great riding bike.
I'd overhaul yours, touch up the paint, and ride it.
I'd overhaul yours, touch up the paint, and ride it.
__________________
Likes For cb400bill:
#13
señor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 6,737
Bikes: '70s - '80s Campagnolo
Liked 6,997 Times
in
3,447 Posts
Add a cool little decal here, and call it good.
Sure, use a liberal amount if scratch remover where it needs it. But too often, random paint filling can look far worse than a few battle scars of a beautiful vintage bike.
Sure, use a liberal amount if scratch remover where it needs it. But too often, random paint filling can look far worse than a few battle scars of a beautiful vintage bike.
Likes For SurferRosa:
#14
Senior Member
Hadn't seen this color before. Which year? Or is that a repaint with the same pinstriping added back?
#16
Crawlin' up, flyin' down
Join Date: Jan 2006
Location: Democratic Peoples' Republic of Berkeley
Posts: 5,908
Bikes: 1967 Paramount; 1982-ish Ron Cooper; 1978 Eisentraut "A"; two mid-1960s Cinelli Speciale Corsas; and others in various stages of non-rideability.
Liked 2,923 Times
in
1,225 Posts
If it was my bike, I'd probably do as polymorphself suggests: wash, Scratch-X and wax. I would not bother with touching-up. (I, too, fear that touch-up attempts would look worse than the current patina, plus I'm not very good at it.) I have had multiple frames repainted, so I am certainly not morally opposed to doing so. But to my eye, that finish looks to be in satisfactory shape, it's a gorgeous color, pinstriping like that does not grow on trees, and the chrome plus a proper waxing should protect it.
But it is not my bike, and my opinion is worth exactly what you are paying for it.
But it is not my bike, and my opinion is worth exactly what you are paying for it.
__________________
"I'm in shape -- round is a shape." Andy Rooney
"I'm in shape -- round is a shape." Andy Rooney
Likes For bikingshearer:
#17
Senior Member
But it is not my bike, and my opinion is worth exactly what you are paying for it.
on closer inspection (on computer and not phone now) I agree I'd just clean it up. i once had the same frame, same color, and the paint is very thin... on purpose so that the chrome beneath gives in a luminous sheen. that would be very hard to replicate with touch ups- and the chips and damage don't look bad once the whole thing is shining.
#18
I’m coming around to agree with your thinking on this: clean, wax, polish. The more I look at it, and the more cleanup, adjustment, and rebuilding of bearings I do the less I’m bothered by the scratches.
It’s starting to shape up! 👍🏼
It’s starting to shape up! 👍🏼
Likes For orcas island:
#19
Senior Member
Good call! It is very hard to “unpaint” a bike . You can always do something later. As Rich said ( Bikingshearer ), touch ups are hard to get just right without looking like …..touch ups. Just ride it and enjoy .
Likes For Kabuki12:
#20
Senior Member
#21
Crawlin' up, flyin' down
Join Date: Jan 2006
Location: Democratic Peoples' Republic of Berkeley
Posts: 5,908
Bikes: 1967 Paramount; 1982-ish Ron Cooper; 1978 Eisentraut "A"; two mid-1960s Cinelli Speciale Corsas; and others in various stages of non-rideability.
Liked 2,923 Times
in
1,225 Posts
How do you guys know I didn't send orcas island an invoice?
__________________
"I'm in shape -- round is a shape." Andy Rooney
"I'm in shape -- round is a shape." Andy Rooney
#22
Forum Moderator
Join Date: Jul 2007
Location: Kalamazoo MI
Posts: 21,172
Bikes: Fuji SL2.1 Carbon Di2 Cannondale Synapse Alloy Viscount Aerospace Pro Raleigh C50 Cromoly Hybrid Legnano Tipo Roma Pista
Liked 7,514 Times
in
4,198 Posts
#23
How do you guys know I didn't send orcas island an invoice?
#24
Senior Member