Freewheel for 650B SS
#1
Full Member
Thread Starter
Freewheel for 650B SS
Hi All
I've got a 1986 Bridgestone that I've converted to 650b with a SS cog in the back. The wheel rim recently split and the bike shop is recommending a Velocity Dynad rim with a Surly track hub. Any freewheel suggestions? I think my current rear cog is 18T or 20T (will get a tooth count tomorrow). Looks like Tree Fort has a decent selection of freewheels. I"m a little shocked at what it's going to take to keep this bike on the road. I've been riding for the past 3 years by using the original rear derailleur as a tensioner and I never imagined it would be this tough to find a rim for caliper brakes. Is it just time to move on? That would be kind of sad as this bike gets me anywhere I need to go in the city and it makes it through all the rain/weather events we have here. I need something safe and reliable. Probably the simplest thing would be to get a basic set of 700c wheels, but I really like 650b. Thanks for any input.
I've got a 1986 Bridgestone that I've converted to 650b with a SS cog in the back. The wheel rim recently split and the bike shop is recommending a Velocity Dynad rim with a Surly track hub. Any freewheel suggestions? I think my current rear cog is 18T or 20T (will get a tooth count tomorrow). Looks like Tree Fort has a decent selection of freewheels. I"m a little shocked at what it's going to take to keep this bike on the road. I've been riding for the past 3 years by using the original rear derailleur as a tensioner and I never imagined it would be this tough to find a rim for caliper brakes. Is it just time to move on? That would be kind of sad as this bike gets me anywhere I need to go in the city and it makes it through all the rain/weather events we have here. I need something safe and reliable. Probably the simplest thing would be to get a basic set of 700c wheels, but I really like 650b. Thanks for any input.
#2
It's not a configuration that has ever been popular, so no there aren't tons of options. But the shop has a solution? So what is the issue?
I recommend shelling out for Shimano or better freewheels. Cheaper ones can tick on for decades or just quit when they feel like.
I recommend shelling out for Shimano or better freewheels. Cheaper ones can tick on for decades or just quit when they feel like.
Likes For tombc:
#3
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 14,671
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Liked 4,569 Times
in
3,060 Posts
There is one really good choice for freewheels it is White Industries and yes they cost that much and yes they are worth it and yes they will last quite a while. Also the Dyad and other Velocity rims are quite good quality and made in the U.S. or if old enough made in Australia.
The reason to go to a high end freewheel or fixed gear cog is simple, you have one gear on your drivetrain you should make sure all those parts are the best you can get because they will likely be more round and smoother and work better and last longer. If you have higher quality components and take care of them they will give you the best ride and you will replace stuff less often and in the case of say a WI freewheel they are serviceable which is rare for those as they are seen as cheap disposable parts not deserving of quality or higher quality parts but still designed to be more disposable. WI isn't like that.
The reason to go to a high end freewheel or fixed gear cog is simple, you have one gear on your drivetrain you should make sure all those parts are the best you can get because they will likely be more round and smoother and work better and last longer. If you have higher quality components and take care of them they will give you the best ride and you will replace stuff less often and in the case of say a WI freewheel they are serviceable which is rare for those as they are seen as cheap disposable parts not deserving of quality or higher quality parts but still designed to be more disposable. WI isn't like that.
Likes For veganbikes:
Likes For erbfarm:
#5
Tinker-er
Join Date: Oct 2007
Location: Mid-Atlantic
Posts: 703
Bikes: 1956 Rudge Sports; 1983 Univega Alpina Uno; 1981 Miyata 610; 1973 Raleigh Twenty; 1994 Breezer Lightning XTR; V4 Yuba Mundo aka "The Schlepper"; 1987 Raleigh "The Edge" Mountain Trials; 1952 R.O. Harrison "Madison"; 1994 Concorde Aquila
Liked 452 Times
in
283 Posts
I've found that Shimano freewheels can be hit or miss, mostly miss in the last few years. The best "inexpensive" single speed freewheels I've seen over the last 30+ years have been NOS Suntour (Maeda). Even used ones can give years of service. Meanwhile, I've seen Shimano units give up after only a few months' use, sometimes less. That said, the Suntour freewheels are now getting up to the price range of a White Industries or Profile Elite, so there really isn't a reason to go with anything but one of those two. We'll spend hundreds on other components, but tend to cheap out on one thing that can absolutely turn your ride from a bicycle to a velocipede, pushed by your feet on the ground, a-la toddler scoot. I have a stockpile of excellent condition and NOS Suntour freewheels from years as a mechanic, but when they give up, I'm going to either a White Industries or Profile Elite.
Likes For PhilFo:
#6
Junior Member
Join Date: Oct 2017
Location: Ottawa, ON, Canada
Posts: 155
Bikes: 1974 PX-10E steep angles, sold, 1977 Witcomb stolen, 1980 Roberts 1 speed, 1987 Cyclops 3 x 6 friction triple crank, 2010 Masi Commuter 1 speed, 2017 Ribble 525 2 x 10 with Ergos
Likes: 0
Liked 32 Times
in
20 Posts
I found that the Sturmey-Archer (actually SunRace I think) single freewheels are very good for the price. A White Industries would be tempting if this was not for a commuter/errand bike that gets left locked up outside.
oldschoolbike
oldschoolbike
#7
Tinker-er
Join Date: Oct 2007
Location: Mid-Atlantic
Posts: 703
Bikes: 1956 Rudge Sports; 1983 Univega Alpina Uno; 1981 Miyata 610; 1973 Raleigh Twenty; 1994 Breezer Lightning XTR; V4 Yuba Mundo aka "The Schlepper"; 1987 Raleigh "The Edge" Mountain Trials; 1952 R.O. Harrison "Madison"; 1994 Concorde Aquila
Liked 452 Times
in
283 Posts
Depending upon where you ride, you may really want the reliability of a top end freewheel. A nice stroll out on a country road may be an annoyance; but there are also places where riding is safer, due to either available space or the area one is riding through. On my commute, there are a few sections I really just want to speed past, instead of walking my bike, hence the desire for reliability. These days I’m riding fixed, so the freewheel is one less mechanism to fail on me. My various body parts, that’s a whole other issue…