New Saddle problem!
#1
Newbie
Thread Starter
Join Date: Dec 2005
Posts: 28
Likes: 0
Liked 0 Times
in
0 Posts
New Saddle problem!
I recently purchased an Selle Italia Storica, new and boxed with all the extras, bag, tools, and cream...not a bad price at £49.
Looks good out of the box no complaints and fitted to my single speed easy enough.
But I think I've got an issue that maybe someone out there can help me with. After fitting the saddle and sitting on it a few times for adjusting etc I noticed a couple of creases appeared starting about halfway down the middle about 6cm long. I thought it was normal as the saddle felt ok . I took it for a quick 20 mile ride on checking it again the number of creases had increased ( no pun intended) and the area as flattened slightly and lost its convexed profile, the area can be pressed in with palm with medium pressure. My question is, Is this normal for this saddle? Does the saddle have to be pretensioned before use? If I hold the sides in then it returns to its original shape until I let go.
Ive seen used Brooks that have retained there shape in this area after 1000s of km so I'm not to sure what to think.
I can’t find any info on this online hence the questions. So any advice would be greatly appreciated. It is setup for me to sit on the widest part for my sit bones and comfort .I’ve included some pics hopefully this will show you what I mean.
My concern is if it looks like this after 20 miles what will it be like months down the line.
Looks good out of the box no complaints and fitted to my single speed easy enough.
But I think I've got an issue that maybe someone out there can help me with. After fitting the saddle and sitting on it a few times for adjusting etc I noticed a couple of creases appeared starting about halfway down the middle about 6cm long. I thought it was normal as the saddle felt ok . I took it for a quick 20 mile ride on checking it again the number of creases had increased ( no pun intended) and the area as flattened slightly and lost its convexed profile, the area can be pressed in with palm with medium pressure. My question is, Is this normal for this saddle? Does the saddle have to be pretensioned before use? If I hold the sides in then it returns to its original shape until I let go.
Ive seen used Brooks that have retained there shape in this area after 1000s of km so I'm not to sure what to think.
I can’t find any info on this online hence the questions. So any advice would be greatly appreciated. It is setup for me to sit on the widest part for my sit bones and comfort .I’ve included some pics hopefully this will show you what I mean.
My concern is if it looks like this after 20 miles what will it be like months down the line.
Last edited by MajorT; 01-31-24 at 02:30 PM.
#2
Senior Member
The Storica retails for $120 in the US:
https://www.amazon.com/selle-ITALIA-...01M1O6JWL?th=1
If you bought yours new for 50 pounds....hmm. Sure it's legit?
It's hard to tell from the photos. Does it seem like real leather, or more like imitation?
Only reason I ask: I've never seen real leather do what yours is doing.
https://www.amazon.com/selle-ITALIA-...01M1O6JWL?th=1
If you bought yours new for 50 pounds....hmm. Sure it's legit?
It's hard to tell from the photos. Does it seem like real leather, or more like imitation?
Only reason I ask: I've never seen real leather do what yours is doing.
Likes For bargainguy:
#3
The Storica retails for $120 in the US:
https://www.amazon.com/selle-ITALIA-...01M1O6JWL?th=1
If you bought yours new for 50 pounds....hmm. Sure it's legit?
It's hard to tell from the photos. Does it seem like real leather, or more like imitation?
Only reason I ask: I've never seen real leather do what yours is doing.
https://www.amazon.com/selle-ITALIA-...01M1O6JWL?th=1
If you bought yours new for 50 pounds....hmm. Sure it's legit?
It's hard to tell from the photos. Does it seem like real leather, or more like imitation?
Only reason I ask: I've never seen real leather do what yours is doing.
#4
Newbie
Thread Starter
Join Date: Dec 2005
Posts: 28
Likes: 0
Liked 0 Times
in
0 Posts
Thanks for the reply’s….
It’s definitely the genuine article right down to the inc tools cream and original box. I think it’s just old surplus stock.
I did find a used one for sale. You’ll notice from the pics that it’s retained its shape but just as importantly the position of the adjustment bolt compared to mine. The used one looks unadjusted and mine is in a different position!
It’s definitely the genuine article right down to the inc tools cream and original box. I think it’s just old surplus stock.
I did find a used one for sale. You’ll notice from the pics that it’s retained its shape but just as importantly the position of the adjustment bolt compared to mine. The used one looks unadjusted and mine is in a different position!
#5
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,869
Bikes: RSO E-tire dropper fixie brifter
Liked 3,302 Times
in
2,096 Posts
anytime leather [pleather] is stacked to form what a poster has mentioned in a previous reply, it tends to crease. How it rebounds to it former surface shape isn't always going to result in what it looked like out of the box.
__________________
-YMMV
-YMMV
#6
Senior Member
You don't have much money in it. If it's comfortable, call it a win and ride it.
__________________
#7
Senior Member
Join Date: Jan 2013
Posts: 2,831
Bikes: too many sparkly Italians, some sweet Americans and a couple interesting Japanese
Liked 677 Times
in
464 Posts
My brother had one of these and I don't recall anything unusual about it but certainly a new saddle should not have had the tension adjusted out as you show in the photo as that would be more typical after many miles.
#8
Senior Member
Join Date: Jun 2005
Location: Kentucky
Posts: 2,663
Bikes: 06 Lemond Reno, 98 GT Timberline mtn.bike
Liked 768 Times
in
471 Posts
I wonder how old the used saddle in post #4 might be? Perhaps the leather used was made to be more comfortable sooner and it's too supple so as to allow a quicker break in. Never owned one, but have read that Brooks take around 300 miles to break in. But Brooks is not a laminated design either. Perhaps the laminated design is in need of some re-design?
#9
Senior Member
Join Date: Jan 2013
Posts: 2,831
Bikes: too many sparkly Italians, some sweet Americans and a couple interesting Japanese
Liked 677 Times
in
464 Posts
I would try Saddle Sauce from Selle Anatomic (who builds "laminate design" leather) which I use on all 6 or my leather suspension saddles. Creases form with the leather hardens over time and laxes suppleness which does not let it give. The Selle Anatomica help line is a good one and they might render an opinion if Selle Italia have no comment.
#10
Comparing the two, yours seems to have been tightened a lot - what happens if you slacken it off?
#11
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 39,647
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Liked 3,485 Times
in
1,913 Posts
FWIW my Brooks Pro saddle from 1967 formed the same pattern when fairly new. That seat continued to serve with those "cracks" for over 20 years and 50k+ miles. I still have that bike and the saddle still has those cracks.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#12
Newbie
Thread Starter
Join Date: Dec 2005
Posts: 28
Likes: 0
Liked 0 Times
in
0 Posts
Plenty food for thought here....
1. certainly a new saddle should not have had the tension adjusted out as you show in the photo as that would be more typical after many miles........ My thoughts too!
2. Saddle Sauce from Selle Anatomic......Selle Anatomica help line is a good one and they might render an opinion if Selle Italia have no comment........Good idea I will definitely drop Selle Italia a line, be interesting to see what they say.
3. laminated design is in need of some re-design?......quite possibly, Selle Italia are not making them anymore so who knows you maybe onto something.
4. Comparing the two, yours seems to have been tightened a lot - what happens if you slacken it off?......Agreed, I'll definitely give it a try.
5. Brooks Pro saddle from 1967 20 years......Love this one! They don't make them like they use too!..I doubt I could say the same about this one in 20 years time.
Thanks for the reply's I'll adjust the tension, use the cream that came with it and will drop Selle Italia an email. It might be superficial (wishful thinking) and if so as nomadmax says I'll ride it and hope it stays good for as long as I need it to.
1. certainly a new saddle should not have had the tension adjusted out as you show in the photo as that would be more typical after many miles........ My thoughts too!
2. Saddle Sauce from Selle Anatomic......Selle Anatomica help line is a good one and they might render an opinion if Selle Italia have no comment........Good idea I will definitely drop Selle Italia a line, be interesting to see what they say.
3. laminated design is in need of some re-design?......quite possibly, Selle Italia are not making them anymore so who knows you maybe onto something.
4. Comparing the two, yours seems to have been tightened a lot - what happens if you slacken it off?......Agreed, I'll definitely give it a try.
5. Brooks Pro saddle from 1967 20 years......Love this one! They don't make them like they use too!..I doubt I could say the same about this one in 20 years time.
Thanks for the reply's I'll adjust the tension, use the cream that came with it and will drop Selle Italia an email. It might be superficial (wishful thinking) and if so as nomadmax says I'll ride it and hope it stays good for as long as I need it to.
Last edited by MajorT; 02-02-24 at 08:53 AM.
#13
Senior Member
Join Date: Sep 2004
Location: Chicago area
Posts: 2,660
Bikes: Airborne "Carpe Diem", Motobecane "Mirage", Trek 6000, Strida 2, Dahon "Helios XL", Dahon "Mu XL", Tern "Verge S11i"
Liked 630 Times
in
434 Posts
That looks to me like the pattern that would result from compression of the saddle between the rider's legs, not from either excessive or insufficient tension.
I wouldn't worry about it. With normal maintenance, I'd expect the saddle to have a normal lifespan.
I wouldn't worry about it. With normal maintenance, I'd expect the saddle to have a normal lifespan.
#16
I've not experienced this. Looking at the mechanics of this: That area of the saddle is an inverted U section, held in tension by the steel frame, with downward force applied at the closed end of the U, which will result in compression forces (front to back) in line with the leather on top, and tension forces on the bottom (open end). So wrinkling would seem to be normal to me, if the leather is still stiff, with the "neutral axis" in bending, being partway down the sides. If the leather were soft, the sides would tend to flare out, losing some of the U shape, and you'd have more of a hammock. If that U section were reversed, open side up, in addition to being uncomfortable, the "edges" would then be loaded in compression, and not thick enough to resist that, and they would buckle. This is why U-sections are loaded in compression on the closed end and tension on the open end. Increasing the tension adjustment on the frame may help cancel some of the compression on the top side, but be careful, you may have sufficient mechanical advantage to cause damage at the rivets. Something in tension, the shallower the depression, the higher the tension, for a given load. So a looser adjustment will sag a bit lower under load, and more localized compression (wrinkles) on top, a tighter adjustment will be less sag under load, less compression, and a tighter, more rigid feel of the saddle.
#17
Newbie
Thread Starter
Join Date: Dec 2005
Posts: 28
Likes: 0
Liked 0 Times
in
0 Posts
Not really sure on this, the saddle felt firm enough. So had no need to adjust tension. When the crease appeared I observed the bolts position and its more or less where it was when received it. I turned it a couple of quarter turns but backed of until I new what was needed. As stated previously the bolt is in a different position than the used saddle.
#18
Newbie
Thread Starter
Join Date: Dec 2005
Posts: 28
Likes: 0
Liked 0 Times
in
0 Posts
I've not experienced this. Looking at the mechanics of this: That area of the saddle is an inverted U section, held in tension by the steel frame, with downward force applied at the closed end of the U, which will result in compression forces (front to back) in line with the leather on top, and tension forces on the bottom (open end). So wrinkling would seem to be normal to me, if the leather is still stiff, with the "neutral axis" in bending, being partway down the sides. If the leather were soft, the sides would tend to flare out, losing some of the U shape, and you'd have more of a hammock. If that U section were reversed, open side up, in addition to being uncomfortable, the "edges" would then be loaded in compression, and not thick enough to resist that, and they would buckle. This is why U-sections are loaded in compression on the closed end and tension on the open end. Increasing the tension adjustment on the frame may help cancel some of the compression on the top side, but be careful, you may have sufficient mechanical advantage to cause damage at the rivets. Something in tension, the shallower the depression, the higher the tension, for a given load. So a looser adjustment will sag a bit lower under load, and more localized compression (wrinkles) on top, a tighter adjustment will be less sag under load, less compression, and a tighter, more rigid feel of the saddle.
#19
Think I understand most of what you're saying. Im definitely wary of adjusting without fully understanding why I'm turning the bolt and how much turning to do. Knowing the implications of overdoing it etc. It would be great if the saddle came with a standard factory setting. Then the user could adjust tension according to rider weight and comfort needs as required.
Last edited by Duragrouch; 02-04-24 at 08:49 PM.
#20
Newbie
Thread Starter
Join Date: Dec 2005
Posts: 28
Likes: 0
Liked 0 Times
in
0 Posts
Thank you for making that perfectly clear Duragrouch...you're well thought out concise and articulate response to my dilemma whilst simultaneously poking fun.....at my expense is appreciated, thank you.
#21
Glad to help. Actually, I had no intention at all, to poke fun at your expense, not at all. Just limited in terminology to explain things.
#22
Think I understand most of what you're saying. Im definitely wary of adjusting without fully understanding why I'm turning the bolt and how much turning to do. Knowing the implications of overdoing it etc. It would be great if the saddle came with a standard factory setting. Then the user could adjust tension according to rider weight and comfort needs as required.
#23
Newbie
Thread Starter
Join Date: Dec 2005
Posts: 28
Likes: 0
Liked 0 Times
in
0 Posts
That's a fair point Grumpus I'll bear that in mind.