Importing lugs?
#1
Junior Wingnut
Thread Starter
Importing lugs?
Does anyone have tricks for importing (specifically Japanese) lugs that don't seem to be offered by US distributors? Trying to get my hands on a Tange/Long Shen LC40 fork crown.
Likes For rellis:
#3
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,194
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Liked 3,999 Times
in
2,378 Posts
One could always become a true business that imports products. All kinds of permits, regulations, insurance and business letters of credit (or the international equivalent) would likely be needed first. Almost no one will go through this to get just a few parts.
If you can't find a on line seller (like Ceeway) that carries the parts try contacting the manufacturer directly. Some of us have a stash of frame making parts and also might have something to offer up. Andy
If you can't find a on line seller (like Ceeway) that carries the parts try contacting the manufacturer directly. Some of us have a stash of frame making parts and also might have something to offer up. Andy
__________________
AndrewRStewart
AndrewRStewart
#4
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,194
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Liked 3,999 Times
in
2,378 Posts
Is this the style of crown you're looking for? Andy
__________________
AndrewRStewart
AndrewRStewart
#5
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,532
Liked 3,828 Times
in
2,608 Posts
I have always wondered if one of the existing framebuilding companies would special order one for you. I get the impression they only order a few times a year. Might be worth talking to someone if Ceeway doesn't have it.
#6
Senior Member
Importing to where? Ceeway has excellent service to the US and I would imagine EU - despite brexit.
__________________
https://www.flickr.com/photos/54319503@N05/
https://www.draper-cycles.com
https://www.flickr.com/photos/54319503@N05/
https://www.draper-cycles.com
#7
Junior Wingnut
Thread Starter
#8
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,532
Liked 3,828 Times
in
2,608 Posts
Did you check with Ceeway?
#9
Junior Wingnut
Thread Starter
#10
Junior Member
Join Date: Jan 2014
Location: San Francisco - it used to be nice
Posts: 77
Bikes: 1970 Alex Singer, 63 Hetchins, 75 Motobecane Townie, more . . .
Likes: 0
Liked 8 Times
in
5 Posts
Isn't that the old Brent Steelman design fork crown that he used on his Cyclocross frames ?
Sure looks like it.
Sure looks like it.
#11
Junior Wingnut
Thread Starter
It is!
In truth, I would be making copies of Potts type ii forks if I had a bending setup and better fork jig. As it is, with my skill level and equipment, I think a cast fork crown is more manageable.
Last edited by 3dvvitch; 04-03-24 at 07:36 PM.