Show me artsy photos of your bike
#1126
Senior Member
Join Date: Nov 2014
Location: Saratoga calif.
Posts: 1,074
Bikes: Miyata 610(66cm), GT Vantara Hybrid (64cm), Nishiki International (64cm), Peugeot rat rod (62 cm), Trek 800 Burning Man helicopter bike, Bob Jackson frame (to be restored?) plus a never ending stream of neglected waifs from the Bike exchange.
Likes: 0
Liked 676 Times
in
246 Posts
The first photo was taken by me in the parkinglot of the Bike Exchange with an old motorola Moto cell phone. The second was taken by the shop manager who was in charge of photographing bikes for sale. Better lighting, better camera, better technique. I don't know any details.
One thing I have learned is not to take pictures in direct sun if possible as it tends to wash out the image.
One thing I have learned is not to take pictures in direct sun if possible as it tends to wash out the image.
Likes For jbchybridrider:
#1130
My artsy photos of my mountain bike
While my talent as a photographer is not equal to the artsy photos of others, here is an improved budget mountain bike made by Genisis.
The amber 1959 Cadillac bullet lights are turn signals flanking the red flashing rear light.
#1131
Senior Member
Likes For iab:
#1133
blahblahblah chrome moly
Cool bike! Do we think the Williams crank might be original? It debuted in the Fall of '62, so probably didn't show up on many bikes until '63. Could your bike be that recent, or do you think the crank was "upgraded" later?
The bike is probably not '63 or newer, because we'd expect to see Universal 61 brakes if the bike was built up after '61. Universal sidepulls continued to exist (model 68 for example), but top of the line bikes with Universals generally got the centerpulls, once they were available. Unitl centerpulls went out of fashion again of course.
The bike is probably not '63 or newer, because we'd expect to see Universal 61 brakes if the bike was built up after '61. Universal sidepulls continued to exist (model 68 for example), but top of the line bikes with Universals generally got the centerpulls, once they were available. Unitl centerpulls went out of fashion again of course.
#1134
Senior Member
We have had quite a bit of rain this year and my early morning canyon ride did not disappoint! The stream was flowing pretty good at the crossings and the sounds were amazing . The ItalVega looks right at home laying against the weeds!
Just another cool morning in the Canyon, all alone
Just another cool morning in the Canyon, all alone
#1135
Junior Member
Join Date: Nov 2013
Location: Aurora, Illinois
Posts: 115
Bikes: 2003 Litespeed Classic Ti, 1960 Frejus Supercorsa, 2015 Rocky Mountain Blizzard, 2001 Cannondale F700
Liked 138 Times
in
56 Posts
Cool bike! Do we think the Williams crank might be original? It debuted in the Fall of '62, so probably didn't show up on many bikes until '63. Could your bike be that recent, or do you think the crank was "upgraded" later?
The bike is probably not '63 or newer, because we'd expect to see Universal 61 brakes if the bike was built up after '61. Universal sidepulls continued to exist (model 68 for example), but top of the line bikes with Universals generally got the centerpulls, once they were available. Unitl centerpulls went out of fashion again of course.
The bike is probably not '63 or newer, because we'd expect to see Universal 61 brakes if the bike was built up after '61. Universal sidepulls continued to exist (model 68 for example), but top of the line bikes with Universals generally got the centerpulls, once they were available. Unitl centerpulls went out of fashion again of course.
So yes, while I think the Williams crankset is "original," I don't think it's something to hang a hat on for timestamping this frame. There is a build thread in the C&V forum here for the most current state of its restoration. The project slowed down over the winter with a potential hairline crack in the top tube that I don't think actually is a crack. Still trying to figure out how I want to move forward on this one.
#1137
blahblahblah chrome moly
iab Is the 4:00 stop in post 1132 original or a mod?
Didja also notice the big ol' 4 mm adjuster screw? and the unsightly bulge in the dropout required to let that oversized screw pass through? Maybe they shoulda kept the M4 screw, would have resisted bending better. Many a heartbreak of bent DO adjusters could have been avoided.
My favorite part is the superscript "o" after Brev, I think it's how they abbreviated "Brevettato". Also love the "open C" typeface.
#1138
Senior Member
And after looking for a little over 2 years, I found a proper derailleur for it. Needs repairs, but that is for a different thread.
#1139
Senior Member
First gen GS. 1951. 4 o'clock stop. 4mm screw. 6mm thick. Brev 0. "Swoopy" open C.
Second gen GS. 1952-ish. 7 o'clock stop. 4mm screw. 7mm thick. Brev "dot" 0. "Swoopy" open C.
Third gen GS. 1953-ish. 7 o'clock stop. 4mm screw. 7mm thick. Brev "dot" 0. "Pointy" open C. Sport hole.
Fourth gen GS. 1954-ish. 7 o'clock stop. 3mm screw. 7mm thick. Brev "dot", no 0. "Pointy" open C. Sport hole. First time referred as 1010.
Second gen GS. 1952-ish. 7 o'clock stop. 4mm screw. 7mm thick. Brev "dot" 0. "Swoopy" open C.
Third gen GS. 1953-ish. 7 o'clock stop. 4mm screw. 7mm thick. Brev "dot" 0. "Pointy" open C. Sport hole.
Fourth gen GS. 1954-ish. 7 o'clock stop. 3mm screw. 7mm thick. Brev "dot", no 0. "Pointy" open C. Sport hole. First time referred as 1010.
Likes For iab:
#1140
Senior Member
Join Date: Sep 2010
Location: NE Indiana
Posts: 8,740
Bikes: 2020 Masi Giramondo 700c; 2013 Lynskey Peloton; 1992 Giant Rincon; 1989 Dawes needs parts; 1985 Trek 660; 1985 Fuji Club; 1984 Schwinn Voyager; 1984 Miyata 612; 1977 Raleigh Competition GS
Liked 274 Times
in
222 Posts
None of my dropout screws have the end caps, not sure whatever happened to them, don't seem like their needed anyway.
#1141
Likes For Caliwild:
Likes For botty kayer:
Likes For cooperryder:
#1145
Polymultiplié
Join Date: Aug 2009
Location: South Holland, NL
Posts: 11,227
Bikes: Yes, please.
Liked 5,242 Times
in
1,929 Posts
Likes For cooperryder:
#1149
I don't know.
Join Date: May 2003
Location: South Meriden, CT
Posts: 2,211
Bikes: '90 B'stone RB-1, '92 B'stone RB-2, '89 SuperGo Access Comp, '03 Access 69er, '23 Trek 520, '14 Ritchey Road Logic, '09 Kestrel Evoke, '08 Windsor Tourist, '17 Surly Wednesday, '89 Centurion Accordo, '15 CruX, '17 Ridley X-Night, '89 Marinoni
Liked 1,036 Times
in
529 Posts
July 4th ride on the Road Logic