Tubular Rims (polished silver)
#1
Wheelman
Thread Starter
Join Date: Aug 2021
Location: Putney, London UK
Posts: 1,018
Bikes: 1982 Holdsworth Avanti (531), 1961 Holdsworth Cyclone
Liked 844 Times
in
416 Posts
Tubular Rims (polished silver)
Hiya Folks,
I got back into cycling a couple of years back when I spotted a 1982 Holdsworth Avanti on Ebay a couple of miles away - I bought one new in 1983.
But this one turned out to have tubular wheels, something I had no experience of.
Long story short, after 2.5 years now I only ride tubular and I love them.
My Avanti came with Mavic Monthlery Route which is a workhorse training/road rim, well suited to roads in London.
I built a 1961 Holdsworth Cyclone last year so I stepped up my game slightly: Mavic Monthlery Pro
Campy Nuovo Tipo large flange (1253) + Mavic Monthlery Pro:
But the question I keep asking myself is what other rims should I be considering ?
Obviously I prefer polished silver - not anodized, and double eyelet 36 hole.
I've also seen comments that rims below 400g are too light for potholes.
I also want to try black/tan tyres at some point (Vittoria Corsa Control ?) - perfect excuse to build more wheels.
Or maybe I just need to buy another vintage frame.
Here's the list I've come up with so far:
So can anybody suggest a suitable rim I haven't listed ?
Any other advice welcome too
I got back into cycling a couple of years back when I spotted a 1982 Holdsworth Avanti on Ebay a couple of miles away - I bought one new in 1983.
But this one turned out to have tubular wheels, something I had no experience of.
Long story short, after 2.5 years now I only ride tubular and I love them.
My Avanti came with Mavic Monthlery Route which is a workhorse training/road rim, well suited to roads in London.
I built a 1961 Holdsworth Cyclone last year so I stepped up my game slightly: Mavic Monthlery Pro
Campy Nuovo Tipo large flange (1253) + Mavic Monthlery Pro:
But the question I keep asking myself is what other rims should I be considering ?
Obviously I prefer polished silver - not anodized, and double eyelet 36 hole.
I've also seen comments that rims below 400g are too light for potholes.
I also want to try black/tan tyres at some point (Vittoria Corsa Control ?) - perfect excuse to build more wheels.
Or maybe I just need to buy another vintage frame.
Here's the list I've come up with so far:
So can anybody suggest a suitable rim I haven't listed ?
Any other advice welcome too
Last edited by Aardwolf; 04-06-24 at 04:46 PM.
Likes For Aardwolf:
#2
Polymultiplié
Join Date: Aug 2009
Location: South Holland, NL
Posts: 11,229
Bikes: Yes, please.
Liked 5,244 Times
in
1,930 Posts
I haven't much experience with tubulars, so nothing to add, alas.
But I do have a fairly large collection of tubular wheels waiting to be tried, so thanks for that list! Very useful.
But I do have a fairly large collection of tubular wheels waiting to be tried, so thanks for that list! Very useful.
Likes For Aardwolf:
#4
Tinker-er
Join Date: Oct 2007
Location: Mid-Atlantic
Posts: 676
Bikes: 1956 Rudge Sports; 1983 Univega Alpina Uno; 1981 Miyata 610; 1973 Raleigh Twenty; 1994 Breezer Lightning XTR; V4 Yuba Mundo aka "The Schlepper"; 1987 Raleigh "The Edge" Mountain Trials; 1952 R.O. Harrison "Madison"; 1994 Concorde Aquila
Liked 425 Times
in
271 Posts
I've never ridden one, but in the past I built up a set of Constrictor Conloy tubulars on a pair of Racelite hubs for a customer.
On Sheldon Brown's site, you can find a link to Spocalc, which has a pretty comprehensive list of rims. With some cross checking and internet image searching, you could find which are white aluminum and 36 hole.
On Sheldon Brown's site, you can find a link to Spocalc, which has a pretty comprehensive list of rims. With some cross checking and internet image searching, you could find which are white aluminum and 36 hole.
#5
Wheelman
Thread Starter
Join Date: Aug 2021
Location: Putney, London UK
Posts: 1,018
Bikes: 1982 Holdsworth Avanti (531), 1961 Holdsworth Cyclone
Liked 844 Times
in
416 Posts
I've never ridden one, but in the past I built up a set of Constrictor Conloy tubulars on a pair of Racelite hubs for a customer.
On Sheldon Brown's site, you can find a link to Spocalc, which has a pretty comprehensive list of rims. With some cross checking and internet image searching, you could find which are white aluminum and 36 hole.
On Sheldon Brown's site, you can find a link to Spocalc, which has a pretty comprehensive list of rims. With some cross checking and internet image searching, you could find which are white aluminum and 36 hole.
#6
Wheelman
Thread Starter
Join Date: Aug 2021
Location: Putney, London UK
Posts: 1,018
Bikes: 1982 Holdsworth Avanti (531), 1961 Holdsworth Cyclone
Liked 844 Times
in
416 Posts
I went through Spocalc and checked against Velobase, added a few (most were anodized)
Last edited by Aardwolf; 04-04-24 at 09:19 AM.
#7
vintage motor
Join Date: Sep 2008
Location: Tepic, Nayarit, Mexico
Posts: 1,644
Bikes: 48 Automoto, 49 Stallard, 50 Rotrax, 62 Jack Taylor, 67 Atala, 68 Lejeune, 72-74-75 Motobecanes, 73 RIH, 71 Zieleman, 74 Raleigh, 78 Windsor, 83 Messina (Villata), 84 Brazzo (Losa), 85 Davidson, 90 Diamondback, 92 Kestrel
Liked 153 Times
in
99 Posts
What kind of riding would these be for? Also, I would think the tires would make a big difference.
Likes For kroozer:
#8
Wheelman
Thread Starter
Join Date: Aug 2021
Location: Putney, London UK
Posts: 1,018
Bikes: 1982 Holdsworth Avanti (531), 1961 Holdsworth Cyclone
Liked 844 Times
in
416 Posts
So the main danger to rims is from potholes.
I'm currently using Vittoria Rubino Graphite 2.0 28mm tubulars (75 psi) and like them a lot.
Butyl tubes so they stay up for months, but the ride may be better on latex.
I'm considering trying Vittoria Corsa Control tubulars, 28mm again. But they're latex and available in tan wall.
Last edited by Aardwolf; 04-06-24 at 03:32 PM.
#9
Senior Member
Join Date: Aug 2010
Location: Utah
Posts: 9,007
Bikes: Paletti,Pinarello Monviso,Duell Vienna,Giordana XL Super,Lemond Maillot Juane.& custom,PDG Paramount,Fuji Opus III,Davidson Impulse,Pashley Guv'nor,Evans,Fishlips,Y-Foil,Softride, Tetra Pro, CAAD8 Optimo,
Liked 6,206 Times
in
2,002 Posts
I hand polished the Arc en Ciel's on my Opus before mounted the tubulars a few years ago. They still look great and have been trouble free laced to some Superbe hubs. This was a 1981 wheelset supposedly.
__________________
Steel is real...and comfy.
Steel is real...and comfy.
Likes For jamesdak:
#10
Wheelman
Thread Starter
Join Date: Aug 2021
Location: Putney, London UK
Posts: 1,018
Bikes: 1982 Holdsworth Avanti (531), 1961 Holdsworth Cyclone
Liked 844 Times
in
416 Posts
I've got roughly the same saddle bag and a Wrights Swallow to try in the summer.
Having spotted the Araya 16B (road) version I'm coming to the conclusion that 350g might be a reasonable weight to try - same as yours.
Likes For chain_whipped:
#12
Wheelman
Thread Starter
Join Date: Aug 2021
Location: Putney, London UK
Posts: 1,018
Bikes: 1982 Holdsworth Avanti (531), 1961 Holdsworth Cyclone
Liked 844 Times
in
416 Posts
https://velobase.com/ViewComponent.a...b91ab&Enum=107
Velobse comment: "Light weight with hidden eyelets and reliving of area in contact with tire."
I thought eyelets were a good idea for road rims, I could be wrong though.
#13
Senior Member
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,919
Bikes: 82 Medici, 85 Ironman, 2011 Richard Sachs
Liked 2,236 Times
in
1,217 Posts
Vintage rims under 400g are only for good roads at high pressures. Eyelets? Ambrosio or Mavic Reflex (silver).
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
#15
Wheelman
Thread Starter
Join Date: Aug 2021
Location: Putney, London UK
Posts: 1,018
Bikes: 1982 Holdsworth Avanti (531), 1961 Holdsworth Cyclone
Liked 844 Times
in
416 Posts
Blue Andonized; Ceramic Coating;
Gray; Hard Anodized
#16
Senior Member
Join Date: Oct 2005
Location: SW Ohio
Posts: 3,743
Bikes: Puch Marco Polo, Saint Tropez, Masi Gran Criterium
Liked 471 Times
in
336 Posts
If your frame has clearance you can add Velocity Major Tom tubular cyclocross rims to your list. These are for 24/25mm width tubular tires minimum. 27-33mm tubulars might be best. Also these should be very strong despite not having any spoke ferrules.
Also these are not clear anodized so the polished finish will develop water spots when ridden in the rain. The polish can be maintained using Mother’s Mag Wheel Polish, then maybe followed up with a car wax product like the Meguiar’s cleaner wax I use. This will “seal” the porous aluminum somewhat and help resist water and keep a shine a bit longer.
BTW: Velocity Major Tom rim extrusion is the tubular version of Velocity’s A23 clincher extrusion. These have a triangular semi-aero shape that may work for certain bikes. I have used double sided tape to attach my tires, the rear is a 30mm Schwalbe with a basketball tread. The front is a 25mm TUFO.
Also these are not clear anodized so the polished finish will develop water spots when ridden in the rain. The polish can be maintained using Mother’s Mag Wheel Polish, then maybe followed up with a car wax product like the Meguiar’s cleaner wax I use. This will “seal” the porous aluminum somewhat and help resist water and keep a shine a bit longer.
BTW: Velocity Major Tom rim extrusion is the tubular version of Velocity’s A23 clincher extrusion. These have a triangular semi-aero shape that may work for certain bikes. I have used double sided tape to attach my tires, the rear is a 30mm Schwalbe with a basketball tread. The front is a 25mm TUFO.
#17
Cantilever believer
I think I raced on Medaille D' Ors in the early 80s.
__________________
Richard C. Moeur, PE - Phoenix AZ, USA
https://www.richardcmoeur.com/bikestuf.html
Richard C. Moeur, PE - Phoenix AZ, USA
https://www.richardcmoeur.com/bikestuf.html
#18
Senior Member
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,919
Bikes: 82 Medici, 85 Ironman, 2011 Richard Sachs
Liked 2,236 Times
in
1,217 Posts
Mavic Reflex: https://www.velobase.com/ViewCompone...=107&AbsPos=64
Blue Andonized; Ceramic Coating;
Gray; Hard Anodized
Blue Andonized; Ceramic Coating;
Gray; Hard Anodized
Plenty of silver rims. Alas, not polished.
https://www.ebay.com/itm/38578726085...mis&media=COPY
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
#19
Wheelman
Thread Starter
Join Date: Aug 2021
Location: Putney, London UK
Posts: 1,018
Bikes: 1982 Holdsworth Avanti (531), 1961 Holdsworth Cyclone
Liked 844 Times
in
416 Posts
silly.
Plenty of silver rims. Alas, not polished.
https://www.ebay.com/itm/38578726085...mis&media=COPY
Plenty of silver rims. Alas, not polished.
https://www.ebay.com/itm/38578726085...mis&media=COPY
I'm going to say Velobase is wrong, or maybe just misleading (grey = silver ?)
They look pretty good, but they are anodized:
From https://fawkes-cycles.co.uk/mavic-re...ver-rim-p15569
- High performance tubular road rim that builds into a light and strong wheel
- SUP rim has a stronger arc-welded joint which is then milled to form an invisible join, eliminating juddering when braking
- Maxtal alloy is 30 % stronger than 6061 without any extra weight
- Anodised finish to reduce wear and corrosion
- UB Control gives the rims a higher coefficient braking surface and a smooth joint due to the digital milling process after anodisation
- Drilled for Presta valve tubes
- Weight: 375 g
Maybe I should do a table for silver anodized.
#20
Standard Member
Join Date: Apr 2009
Location: Brunswick, Maine
Posts: 4,350
Bikes: 1948 P. Barnard & Son, 1962 Rudge Sports, 1963 Freddie Grubb Routier, 1980 Manufrance Hirondelle, 1983 F. Moser Sprint, 1989 Raleigh Technium Pre, 2001 Raleigh M80
Liked 1,055 Times
in
524 Posts
Only single-eyeleted, but I recommend Nisi Corsa Stretto at 420g.
__________________
"Chim-chiminey, chim-chiminey, chim-chim cheroo"
"Chim-chiminey, chim-chiminey, chim-chim cheroo"
#21
Wheelman
Thread Starter
Join Date: Aug 2021
Location: Putney, London UK
Posts: 1,018
Bikes: 1982 Holdsworth Avanti (531), 1961 Holdsworth Cyclone
Liked 844 Times
in
416 Posts
Not sure I can see the difference with "single eyed"
https://www.pedalpedlar.co.uk/produc...0c-tubular-rim
Table updated with rims listed on www.pedalpedlar.co.uk:
(Also added Velobase ratings, may not mean much)
https://www.pedalpedlar.co.uk/produc...0c-tubular-rim
Table updated with rims listed on www.pedalpedlar.co.uk:
(Also added Velobase ratings, may not mean much)
#22
Senior Member
Join Date: Aug 2010
Location: Utah
Posts: 9,007
Bikes: Paletti,Pinarello Monviso,Duell Vienna,Giordana XL Super,Lemond Maillot Juane.& custom,PDG Paramount,Fuji Opus III,Davidson Impulse,Pashley Guv'nor,Evans,Fishlips,Y-Foil,Softride, Tetra Pro, CAAD8 Optimo,
Liked 6,206 Times
in
2,002 Posts
They are Roubaix's. I'm a Veloflex Tubular snob and don't think I've ridden any Vittoria tubs.
__________________
Steel is real...and comfy.
Steel is real...and comfy.
Likes For jamesdak:
#23
Senior Member
Velobase says they don't have eyelets
https://velobase.com/ViewComponent.a...b91ab&Enum=107
Velobse comment: "Light weight with hidden eyelets and reliving of area in contact with tire."
I thought eyelets were a good idea for road rims, I could be wrong though.
https://velobase.com/ViewComponent.a...b91ab&Enum=107
Velobse comment: "Light weight with hidden eyelets and reliving of area in contact with tire."
I thought eyelets were a good idea for road rims, I could be wrong though.
#24
“Senior” Member
Regarding the weight quoted in the chart for Monthlery Route (420 g): I’ve built up two wheelsets with this rim. Weighed each rim at 400g +/- maybe 2g.
Last edited by obuckler; 04-04-24 at 09:38 PM.
#25
Wheelman
Thread Starter
Join Date: Aug 2021
Location: Putney, London UK
Posts: 1,018
Bikes: 1982 Holdsworth Avanti (531), 1961 Holdsworth Cyclone
Liked 844 Times
in
416 Posts
Velobase: 420g (Spec)
PedalPdeler: 397, measured presumably.
I'll put a comment in the table.
1980 Mavic catalogue