Flat Repair Air
#26
See photo in post #7 above.
Likes For indyfabz:
#27
Over the hill
Join Date: Mar 2006
Location: Los Angeles, CA
Posts: 24,418
Bikes: Giant Defy, Giant Revolt
Liked 1,259 Times
in
714 Posts
On one of our C&V rides, one rider got a puncture in one of his tubulars. I can't remember whether he added sealant to the tire then, or already had it in the tire, but it sealed and he re-inflated it with CO2, and rode the remaining 20 miles of the ride without a problem.
So now, on the exceedingly rare occasions when I ride with tubulars, I carry sealant, a valve core wrench, and a pump. And a spare tire.
And a phone.
So now, on the exceedingly rare occasions when I ride with tubulars, I carry sealant, a valve core wrench, and a pump. And a spare tire.
And a phone.
__________________
It's like riding a bicycle
It's like riding a bicycle
Last edited by urbanknight; 05-10-24 at 11:38 PM.
#28
climber has-been
Join Date: Dec 2004
Location: Palo Alto, CA
Posts: 7,321
Bikes: Scott Addict R1, Felt Z1
Liked 3,803 Times
in
1,894 Posts
Interesting. I assume the "problem" when using CO₂ with TPU tubes are the cold temperatures. I've used CO₂ on TPU tubes successfully, but I make sure to inflate slowly.
You should always inflate slowly with CO₂. I froze and punctured a butyl tube once with CO₂ -- it failed right around the valve.
You should always inflate slowly with CO₂. I froze and punctured a butyl tube once with CO₂ -- it failed right around the valve.
Last edited by terrymorse; 05-11-24 at 11:13 AM.
#29
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 10,030
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Liked 3,014 Times
in
1,632 Posts
Interesting. I assume the "problem" when using CO₂ with TPU tubes are the cold temperatures. I've used CO₂ on TPU tubes successfully, but I make sure to inflate slowly.
You should always inflate slowly with CO₂. I froze and punctured a butyl tube once with CO₂ -- it failed right around the valve.
You should always inflate slowly with CO₂. I froze and punctured a butyl tube once with CO₂ -- it failed right around the valve.
as noted, especially with new TPU tubes, rene herse call for 20 PSI inflating increments.... to be 100% clear they do not say no Co2, that is me saying know way I personally can do slow inflation with CO2
__________________
Life is too short not to ride the best bike you have, as much as you can.
Life is too short not to ride the best bike you have, as much as you can.
#30
Full Member
Thread Starter
Well, having not tried it I would be interested in the method you use to do it slowly. I assumed it would be out of your control once you pierce the seal.
#31
The Wheezing Geezer
Join Date: Oct 2021
Location: Española, NM
Posts: 1,142
Bikes: 1976 Fredo Speciale, Rivendell Clem Smith Jr., Libertas mixte
Liked 1,033 Times
in
489 Posts
Forget what I said about Schrader valves I overlooked the OP mentioning tubular tires but now I’m curious why They added that specification to asking about how people inflate their tires. forgive my ignorance, what is unique about tubular tires that affects how you inflate them?
My front Rally 21mm goes for a week or two between top offs, and I use my floor pump for the 28mm rear, which needs topping off every other day (I've never run super high pressures), but the Roadie mini TT would work fine. How long it will last remains to be seen.
Likes For Fredo76:
#32
With a mighty wind
The only reason I’d ever ride tubular again would be in pursuit of being super vintage. I’m talking something like wooden rims or similar.
In that scenario, I’d already have a Silca frame pump under the top tube, to ride without it would be incomplete. So this kind of sorts itself out.
I can’t think of another reason in 2024 that I’d be out there on tubulars.
In that scenario, I’d already have a Silca frame pump under the top tube, to ride without it would be incomplete. So this kind of sorts itself out.
I can’t think of another reason in 2024 that I’d be out there on tubulars.
#33
The Wheezing Geezer
Join Date: Oct 2021
Location: Española, NM
Posts: 1,142
Bikes: 1976 Fredo Speciale, Rivendell Clem Smith Jr., Libertas mixte
Liked 1,033 Times
in
489 Posts
In the modern parlance, I'm a 'fan' of technologies (and indeed, ways of thinking) from certain periods in our not-so-distant past.
Totally Tubular - Page 130 - Bike Forums
When I find my little frame bag, I plan to throw in a valve core remover and sealant, for redundancy in an emergency. And bring my phone. ;-)
Totally Tubular - Page 130 - Bike Forums
When I find my little frame bag, I plan to throw in a valve core remover and sealant, for redundancy in an emergency. And bring my phone. ;-)
#34
climber has-been
Join Date: Dec 2004
Location: Palo Alto, CA
Posts: 7,321
Bikes: Scott Addict R1, Felt Z1
Liked 3,803 Times
in
1,894 Posts
Last edited by terrymorse; 05-12-24 at 09:07 AM. Reason: spelling
#35
I bought a CO₂ inflator made by Silca. It has a little dial valve that regulates the flow of the gas. Very easy to mange inflation rate.
#36
In my experience CO2 works fine with TPU tubes. You don’t have to fill it slowly or do anything different.
The only caveat is that it will leak out quicker than with butyl tubes. So make sure you empty it and pump it up again with regular air once you get home.
The only caveat is that it will leak out quicker than with butyl tubes. So make sure you empty it and pump it up again with regular air once you get home.
#37
Senior Member
Join Date: Jul 2008
Location: 25 miles northwest of Boston
Posts: 29,593
Bikes: Bottecchia Sprint, GT Timberline 29r, Marin Muirwoods 29er, Trek FX Alpha 7.0
Liked 3,609 Times
in
2,357 Posts
not sure this is worth circling back for, or if I understand the question. but w/ my Schrader valves I don't use pump adapters. the schraders fit everything I have, or come across. gas station pumps, the portable inflator in the car, the frame pumps & co inflator all fit w/o an adapter
Likes For rumrunn6:
#38
Expired Member
Nah, just another tubular confusion joke.
#40
Expired Member
#42
Expired Member