What do you guys think about these steel frames?
#1
Downhill Racer
Thread Starter
Join Date: Jan 2006
Posts: 739
Bikes: 1994 Bridgestone RB1, 2006 Cannondale R1000, 2007 Cannondale Caad9 Optimo2
Likes: 0
Liked 0 Times
in
0 Posts
What do you guys think about these steel frames?
The frames and their ride and handling. Not their paint jobs. That I can change.
I'm looking for a more compliant ride than MY (yes I have them) Cannondale CAAD8 and CAAD9 bikes.Don't mistake that for a more relaxed riding position or slower handling response.
I know that steel, even the stiffer variety, will soak up the bumps more than aluminum.
That's what I'm looking for, just a slightly more compliant ride.
I have a steel Bridgestone RB-1 that I like. It's just a tad big and too heavy.
Waterford R-33
Ciocc COM 12.5
Cinelli Nuovo Supercorsa
Torelli Countach-EL-OS Tubing
Co-Motion Espresso
Landshark Dedaccial Less Than Zero
I don't care about carbon and I already have a CAAD9.
I'm wanting some nice steel.I know the Waterford is nice but $$$
I'm looking for a more compliant ride than MY (yes I have them) Cannondale CAAD8 and CAAD9 bikes.Don't mistake that for a more relaxed riding position or slower handling response.
I know that steel, even the stiffer variety, will soak up the bumps more than aluminum.
That's what I'm looking for, just a slightly more compliant ride.
I have a steel Bridgestone RB-1 that I like. It's just a tad big and too heavy.
Waterford R-33
Ciocc COM 12.5
Cinelli Nuovo Supercorsa
Torelli Countach-EL-OS Tubing
Co-Motion Espresso
Landshark Dedaccial Less Than Zero
I don't care about carbon and I already have a CAAD9.
I'm wanting some nice steel.I know the Waterford is nice but $$$
__________________
"I didn't see him/her" is a confession, not an excuse.
"I didn't see him/her" is a confession, not an excuse.
Last edited by PhilThee; 12-28-07 at 04:23 AM.
#3
Fattest Thin Man
Join Date: Sep 2005
Location: Directly above the center of the earth
Posts: 2,648
Bikes: Miyata 610, Vinco V, Rocky Mountain Element
Likes: 0
Liked 4 Times
in
1 Post
I found a nice Fuji Roubaix from 2003-2004. It's 853 and built up with Dura Ace and Mavic wheels weighs about 17 lbs and is one sweet ride. The best part is how cheap it was. The frame was <$100 and the wheels were $150. I already had almost all the Dura Ace stuff hanging around, so it cost me very little to get into it.
And it's a really nice ride. Good climber, decent sprinter, excellent comfort for all day rides. Perfect for what I needed/wanted.
Az
And it's a really nice ride. Good climber, decent sprinter, excellent comfort for all day rides. Perfect for what I needed/wanted.
Az
#4
Resident Old Fart
Join Date: Sep 2004
Location: Tallahassee, FL
Posts: 1,295
Bikes: Douglas Precision Ti
Likes: 0
Liked 0 Times
in
0 Posts
I know that Land Shark makes a quality bike, but I have to wonder if the folks that do their paint are color blind or just pulling our legs. Those are some of the ugliest paint jobs I have ever seen.
Go for the C0-Motion if you can afford it.
Go for the C0-Motion if you can afford it.
__________________
Wag more, bark less
Wag more, bark less
#5
Senior Member
Land Shark by a mile, just don't let them paint it OR direct the paint job yourself. Their welds are perfect and the overall workmanship is just freakin' amazing...did I mention the paint...
KRhea
KRhea
#6
Senior Member
Join Date: Sep 2005
Location: In the foothills of Los Angeles County
Posts: 26,251
Liked 10,164 Times
in
4,938 Posts
I have a Gunnar Sport and I'm happy with the way it feels on the road, especially rough roads. It's more comfortable than my CAAD5. $700 for the frame and it's stiff enough for me, too. I had a Prestige Landshark once and it was too whippy. It was plain grey and didn't even have sharks on it.
#8
Administrator
Join Date: Feb 2005
Location: Delaware shore
Posts: 13,574
Bikes: Cervelo C5, Guru Photon, Waterford, Specialized CX
Liked 2,364 Times
in
1,571 Posts
I don't know anything about the Co-Motion but of the rest, the Waterford is my choice. Gunnar is made by the same people but is more of a budget version. Landsharks had that awful paint and I agree with Big John that the frame flexes too much especially if you are a strong rider or weigh a lot.
#9
How much does it weigh?
Join Date: Jul 2005
Location: Weight Weenie on a budget.
Posts: 3,427
Bikes: Lotus Fixed, Bianchi Virata 2004
Likes: 0
Liked 1 Time
in
1 Post
Waterford or Landshark, FTW.
You may be able to find a steel Cinelli using Columbus tubing... I've seen a few newer frames around recently. New as in very much looking like they were 2007 builds. Ask around?
You may be able to find a steel Cinelli using Columbus tubing... I've seen a few newer frames around recently. New as in very much looking like they were 2007 builds. Ask around?
#10
Ignoring the Waterford, I'd choose the other three in this order: Co-motion, Landshark, then Gunnar. I also think I just ordered them in price. Bottom line though is that they are all really nice frames and I'm pretty sure you'd be happy with any of them. Might be worth just buying the cheapest of the four and getting a little bit of a wheel upgrade over what you were planning.
#11
Senior Member
Tim
#12
Senior Member
Join Date: May 2007
Location: Raleigh, NC
Posts: 8,896
Bikes: Waterford RST-22, Bob Jackson World Tour, Ritchey Breakaway Cross, Soma Saga, De Bernardi SL, Specialized Sequoia
Likes: 0
Liked 6 Times
in
4 Posts
People may gripe about Landshark paint jobs, but they will paint their frames any way you like. If you want a nice simple paint job, they will do that. However, if you want something unique or wild, they will fill the bill. Considering the prices of most custom frames these days, Landsharks are a good value.
#14
or tarckeemoon, depending
Join Date: Dec 2005
Location: the pesto of cities
Posts: 7,017
Bikes: Davidson Impulse, Merckx Titanium AX, Bruce Gordon Rock & Road, Cross Check custom build, On-One Il Pomino, Shawver Cycles cross, Zion 737, Mercian Vincitore, Brompton S1L, Charge Juicer
Likes: 0
Liked 1 Time
in
1 Post
I would get a Landshark with a fugly paint job just to annoy everyone.
#15
Dumb@s$ Jarhead
Join Date: Sep 2005
Location: Woodland Park CO
Posts: 1,110
Bikes: Calfee Dragon Fly Pro 1984 Pinarello Montello
Likes: 0
Liked 0 Times
in
0 Posts
There are a couple of nice waterfords on Ebay right now.. and GVH used to have some steals on Landsharks...
__________________
Si vis pacem, para bellum
Si vis pacem, para bellum
#16
Downhill Racer
Thread Starter
Join Date: Jan 2006
Posts: 739
Bikes: 1994 Bridgestone RB1, 2006 Cannondale R1000, 2007 Cannondale Caad9 Optimo2
Likes: 0
Liked 0 Times
in
0 Posts
I just added the Cinelli Nuovo Supercorsa and the Torelli Countach with EL-OS tubbing to the list.
__________________
"I didn't see him/her" is a confession, not an excuse.
"I didn't see him/her" is a confession, not an excuse.
Last edited by PhilThee; 12-27-07 at 02:35 AM.
#17
Downhill Racer
Thread Starter
Join Date: Jan 2006
Posts: 739
Bikes: 1994 Bridgestone RB1, 2006 Cannondale R1000, 2007 Cannondale Caad9 Optimo2
Likes: 0
Liked 0 Times
in
0 Posts
#18
Downhill Racer
Thread Starter
Join Date: Jan 2006
Posts: 739
Bikes: 1994 Bridgestone RB1, 2006 Cannondale R1000, 2007 Cannondale Caad9 Optimo2
Likes: 0
Liked 0 Times
in
0 Posts
Are you saying that simply because of the paint? That can be changed.
__________________
"I didn't see him/her" is a confession, not an excuse.
"I didn't see him/her" is a confession, not an excuse.
#19
Senior Member
you don't say what the ride and handling qualities are that you're after- the multishaped UltraFoco Cinelli Nuovo SC and EL-OS Torelli Countach are quite different in character but both superb rides. here's some pics of my Cinelli.
best,
k
Last edited by caterham; 12-28-07 at 04:00 AM.
#20
.
Join Date: Aug 2005
Location: Rocket City, No'ala
Posts: 12,764
Bikes: 2014 Trek Domane 5.2, 1985 Pinarello Treviso, 1990 Gardin Shred, 2006 Bianchi San Jose
Likes: 0
Liked 30 Times
in
15 Posts
Check out Heron; made by Waterford but cheaper. Also quite a few custom frame makers in the Waterford price range.
Isn't BD coming out with some new steel frames?
Isn't BD coming out with some new steel frames?
#21
Senior Member
#24
Senior Member
Hi,
you are asking about very different bikes there. What sort of bike do you want.
I have a Gunnar Sport. This is a sweet riding bike. For something with more zoom, there are bikes suitable for racing like the Gunnar Roadie. If you are serious about racing then you want an all out race bike. Doesn't sound like that's what you're looking for.
Many brands will have both sport and performance bikes.
What I suggest is that you call Waterford. Their bikes are custom and
will make yours to fit you and your riding style perfectly. The frame will prob run you $1200-1500, but that's stll cheaper than a couple you mentioned.
Gunnar is made by Waterford. I didn't plan on winding up with one. My LBS had
one and I gave it a test ride just for the heck of it. It made me smile.
you are asking about very different bikes there. What sort of bike do you want.
I have a Gunnar Sport. This is a sweet riding bike. For something with more zoom, there are bikes suitable for racing like the Gunnar Roadie. If you are serious about racing then you want an all out race bike. Doesn't sound like that's what you're looking for.
Many brands will have both sport and performance bikes.
What I suggest is that you call Waterford. Their bikes are custom and
will make yours to fit you and your riding style perfectly. The frame will prob run you $1200-1500, but that's stll cheaper than a couple you mentioned.
Gunnar is made by Waterford. I didn't plan on winding up with one. My LBS had
one and I gave it a test ride just for the heck of it. It made me smile.
#25
SLJ 6/8/65-5/2/07
Well since I ride a LeMond Maillot Jaune (TIG welded Reynolds 853) I'd suggest adding a Sarthe to the list and as a general observation I like the ride of 853 quite a bit.
I've never heard a knock against Waterford except the price. Since I'm old enough to remember the "good old days" I react to "new" Cinellis differently than I do "old" Cinellis but they are very nice frames and I don't see one letting you down. I've long thought about LandShark but (like most others) would have to specify the paint myself.
Torelli makes a beautiful frame. Someone suggested Mondonico. I believe that they're just about the last of the family built artisan frames out there. Doesn't mean the bigger companies like Cinelli are inferior at all but Mondonicos are built by either the father or the son with no outsourcing. (At least I think it's still that way).
In this crowd the Gunnar looks pretty plain...
You can't go too wrong in any case.
I've never heard a knock against Waterford except the price. Since I'm old enough to remember the "good old days" I react to "new" Cinellis differently than I do "old" Cinellis but they are very nice frames and I don't see one letting you down. I've long thought about LandShark but (like most others) would have to specify the paint myself.
Torelli makes a beautiful frame. Someone suggested Mondonico. I believe that they're just about the last of the family built artisan frames out there. Doesn't mean the bigger companies like Cinelli are inferior at all but Mondonicos are built by either the father or the son with no outsourcing. (At least I think it's still that way).
In this crowd the Gunnar looks pretty plain...
You can't go too wrong in any case.
__________________
“Life is not one damned thing after another. Life is one damned thing over and over.”
Edna St. Vincent Millay
“Life is not one damned thing after another. Life is one damned thing over and over.”
Edna St. Vincent Millay