How far will you go?
#1
Senior Member
Thread Starter
Join Date: Mar 2017
Location: San Clemente
Posts: 664
Bikes: 87 Bianchi X4, 95 Bianchi Ti Mega Tube, 06 Alan Carbon Cross X33, Gold plated Columbus AIR Guerciotti, 74 Galmozzi Super Competizione, 52 Bianchi Paris Roubaix.
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 259 Post(s)
Liked 540 Times
in
166 Posts
How far will you go?
How far will you go using off brand products? I don't blink when it comes to "Asian" clothing, good quality bibs and shirt for 20-30 bucks. Water bottles, gloves, etc.
Now the dilemma is, I'm building up my latest project and have been eying these 3d print seats as well as carbon bars, stems, posts and wheels for at least a quarter of the price. I'm having a hard time doing that. Sad to say I want the label.
Now the dilemma is, I'm building up my latest project and have been eying these 3d print seats as well as carbon bars, stems, posts and wheels for at least a quarter of the price. I'm having a hard time doing that. Sad to say I want the label.
#2
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,538
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 4359 Post(s)
Liked 3,998 Times
in
2,668 Posts
What do you mean by "Asian" clothing? Like a kimono or ao dai or hanbok? Or are you talking clothing made in one of the many Asian countries of which plenty of known quantities make their clothing in? Clothing like a shirt or pants is less of a safety issue. Poor stitching will just lead to a garment that falls apart more easily which can cause safety issues but in normal wear is not so much.
In terms of the "label" it is not a label you are buying it is the actual R&D, support and quality. You are also getting the physical item but just copying the product doesn't add up to actual quality or any similarity aside from outer appearance. It doesn't mean it is safe or of good quality and if something does happen you are generally on your own. That is why you buy from a known quantity who likely specializes in carbon components or whatever you are buying. If a Specialized S-Works Carbon Hover bar has a problem with cracking, Specialized will send out a recall notice and get you new bars or find a solution, if Ali Baba and his 40 thieves random no-name bars have an issue with cracking, hope you notice it before something bad happens and you just need to find new ones on your own with your own money. It is not to say either one cannot have issues but when you have issues a known quantity will generally help you correct those issues or replace it whereas some unknown quantity you are paying little money too aren't and if they do it is probably to the same component with the same issues that will come back because why spend the money on new open molds when they can just produce the same product until they change names or go out of business.
In terms of the "label" it is not a label you are buying it is the actual R&D, support and quality. You are also getting the physical item but just copying the product doesn't add up to actual quality or any similarity aside from outer appearance. It doesn't mean it is safe or of good quality and if something does happen you are generally on your own. That is why you buy from a known quantity who likely specializes in carbon components or whatever you are buying. If a Specialized S-Works Carbon Hover bar has a problem with cracking, Specialized will send out a recall notice and get you new bars or find a solution, if Ali Baba and his 40 thieves random no-name bars have an issue with cracking, hope you notice it before something bad happens and you just need to find new ones on your own with your own money. It is not to say either one cannot have issues but when you have issues a known quantity will generally help you correct those issues or replace it whereas some unknown quantity you are paying little money too aren't and if they do it is probably to the same component with the same issues that will come back because why spend the money on new open molds when they can just produce the same product until they change names or go out of business.
#3
Expired Member
Join Date: Jun 2007
Location: TN
Posts: 11,547
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 3674 Post(s)
Liked 5,441 Times
in
2,764 Posts
I'd ponder the consequences if something of questionable origin and price turns out to be crap. If your $20 bibs split, no big deal. Your $20 "carbon" bars might be more of an issue.
Likes For shelbyfv:
#4
Senior Member
Join Date: Jan 2010
Posts: 39,254
Mentioned: 211 Post(s)
Tagged: 1 Thread(s)
Quoted: 18424 Post(s)
Liked 15,579 Times
in
7,337 Posts
Wonder if my Rapha jerseys were made in Asia.
#5
Expired Member
Join Date: Jun 2007
Location: TN
Posts: 11,547
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 3674 Post(s)
Liked 5,441 Times
in
2,764 Posts
My "Asian" brand truck was built in MS. I'd have been happier had it been built in Japan.
Likes For shelbyfv:
#6
Banned
Join Date: Feb 2008
Location: Mississauga/Toronto, Ontario canada
Posts: 8,721
Bikes: I have 3 singlespeed/fixed gear bikes
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 4227 Post(s)
Liked 2,488 Times
in
1,286 Posts
Just pay a little extra and buy quality stuff, don't settle down for cheap no-name brand crap.
#7
Old guy & bikes
A friend said, “You can skimp on the whisky, but don’t skimp on the vermouth.” Especially for safety-critical components, I buy well regarded brand names: stems, handlebars, seat posts, tires, brake pads, etc. I buy better quality for reliability as well, especially on running gear, but better goods don’t have to be expensive. Look for cost effectveness.
Likes For canalligators:
#8
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,847
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Quoted: 2338 Post(s)
Liked 2,827 Times
in
1,543 Posts
I have found over the years that buying proven, known quality is always cheaper in the long run.
I do certainly look for deals and buy on sale as much as possible, but even there I have found a good price is a poor value if it is not the right size or if I know I can't live with the color (rare there because I like bright....er gaudi)
all comes down to the economic principle that rules all: TANSTAAFL OR There Aint No Such Thing AS A Free Lunch
I do certainly look for deals and buy on sale as much as possible, but even there I have found a good price is a poor value if it is not the right size or if I know I can't live with the color (rare there because I like bright....er gaudi)
all comes down to the economic principle that rules all: TANSTAAFL OR There Aint No Such Thing AS A Free Lunch
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Likes For squirtdad:
Likes For Jughed:
#10
Senior Member
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 5,795
Bikes: 1989 Cinelli Supercorsa
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 3514 Post(s)
Liked 2,927 Times
in
1,776 Posts
#11
climber has-been
Join Date: Dec 2004
Location: Palo Alto, CA
Posts: 7,111
Bikes: Scott Addict R1, Felt Z1
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 3432 Post(s)
Liked 3,567 Times
in
1,793 Posts
Likes For terrymorse:
#12
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,538
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 4359 Post(s)
Liked 3,998 Times
in
2,668 Posts
That is true one of the companies we work with as a service center took us out to lunch on their dime last year and the Piña Coladas I had gave me a bit of a headache and it was tougher to finish out the day and had a slight hangover the next day granted they were big Piña Coladas and I survived but yeah not totally free I paid the cost ; )
#13
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,395
Bikes: RSO E-tire dropper fixie brifter
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 2,979 Times
in
1,920 Posts
in some cases I'll look into premium used vs buying the budget new Iffies.
__________________
-Oh Hey!
-Oh Hey!
#14
Old guy & bikes
#15
Senior Member
Join Date: Sep 2017
Posts: 7,887
Mentioned: 38 Post(s)
Tagged: 0 Thread(s)
Quoted: 6972 Post(s)
Liked 10,970 Times
in
4,692 Posts
Likes For Koyote:
#16
Senior Member
SMP saddles for me. I use the Stratos with standard padding. No cheap saddles.
I own two Yoeleo R12 frames with seatposts and integrated bar/stems from Yoeleo. No problems. There are several brands of Chinese companies making high quality carbon components, selling direct. Yoeleo prices have gone up substantially this year.
BTLOS wheels are high quality for around $800.
I've bought two jerseys from China one has been good, the other was longer than normal, wouldn't use that company again. No cheap bibs for me, but I buy good stuff only when discounted.
I own two Yoeleo R12 frames with seatposts and integrated bar/stems from Yoeleo. No problems. There are several brands of Chinese companies making high quality carbon components, selling direct. Yoeleo prices have gone up substantially this year.
BTLOS wheels are high quality for around $800.
I've bought two jerseys from China one has been good, the other was longer than normal, wouldn't use that company again. No cheap bibs for me, but I buy good stuff only when discounted.
Last edited by DaveSSS; 03-27-23 at 08:04 AM.
#17
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,847
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Quoted: 2338 Post(s)
Liked 2,827 Times
in
1,543 Posts
and free bikes are often the most expensive
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
#18
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,395
Bikes: RSO E-tire dropper fixie brifter
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 2,979 Times
in
1,920 Posts
#19
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,616
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10967 Post(s)
Liked 7,494 Times
in
4,190 Posts
I sometimes wonder what 'off brand' actually means in terms of cycling.
Is Microshift considered offbrand? I dont think so, but others might.
Is SunRace considered offbrand? I dont think so, but others might.
I have Garmin mounts for a GPS and Varia radar light that are absolutely off brand...its some 6 letter Amazon brand and it was an excellent decision to pay less than half the cost of Garmin branded mounts.
Some bottle cages that I have in a drawer are by a brand I have never heard of. They were cheap, light, and hold a bottle just fine. Again, seems like a good buy to me.
I have not purchased a frame, or wheels, or components that could be considered offbrand. There have always been good alternatives for the same price, or near that price. I dont want a carbon frame and honestly every single house branded frame I have found has geometry that wouldnt work for me so its a moot issue.
I am not interested in carbon bars or stems so again- moot point.
A saddle needs to have the dimensions I like, and I havent come across a generic brand saddle that does, so they arent even a consideration.
I would buy a carbon off brand seatpost, if I saw that it was recommended by many people over time.
Is Microshift considered offbrand? I dont think so, but others might.
Is SunRace considered offbrand? I dont think so, but others might.
I have Garmin mounts for a GPS and Varia radar light that are absolutely off brand...its some 6 letter Amazon brand and it was an excellent decision to pay less than half the cost of Garmin branded mounts.
Some bottle cages that I have in a drawer are by a brand I have never heard of. They were cheap, light, and hold a bottle just fine. Again, seems like a good buy to me.
I have not purchased a frame, or wheels, or components that could be considered offbrand. There have always been good alternatives for the same price, or near that price. I dont want a carbon frame and honestly every single house branded frame I have found has geometry that wouldnt work for me so its a moot issue.
I am not interested in carbon bars or stems so again- moot point.
A saddle needs to have the dimensions I like, and I havent come across a generic brand saddle that does, so they arent even a consideration.
I would buy a carbon off brand seatpost, if I saw that it was recommended by many people over time.
#20
I’m a little Surly
Join Date: Jan 2010
Location: Near the district
Posts: 2,422
Bikes: Two Cross Checks, a Karate Monkey, a Disc Trucker, and a VO Randonneur
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 699 Post(s)
Liked 1,294 Times
in
647 Posts
I'm a "plus sized" guy my cycling clothing comes from "USA sized Aerotech Designs) my frames and some handlebars from some of the most skilled bike builders in the world Taiwan, Japan (some shifty bits, handlebars, stem, and a cranks), Germany (my dynamo hubs, lights, racks, and some panniers), France (Rims, saddle, bar tape, panniers), USA (hubs, stems, seatposts, brakes), China (my carbon wheels), finally a couple of bikes have shifty bits from Campy since they're bottom of the line I assume they're built in Poland.
It's a global word out there, buy the things that work for you best
It's a global word out there, buy the things that work for you best
#21
Senior Member
Join Date: Jun 2002
Location: San Jose, CA
Posts: 3,691
Bikes: Too many bikes, too little time to ride
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 431 Post(s)
Liked 460 Times
in
318 Posts
As with all things, one should do some research before making a purchase. As far as AliExpress stuff, I've bought clothing (sizing can be tricky to get right) and carbon stems, handlebars, seatposts, and wheelsets. I generally look at seller reputation and item sold volume and reviews, but it can still be hit or miss.
The most dodgy incident I've encountered was some material flaking off near the steerer bolt area on an integrated stem-bar. I didn't overtighten it; the bolt hole wasn't finished well and a jagged edge caught on the bolt and flaked off. I was ready to trash it but I've also ridden it hard plenty times since then and it's still holding up. I will probably use it on my indoor trainer bike just to be safe.
The most dodgy incident I've encountered was some material flaking off near the steerer bolt area on an integrated stem-bar. I didn't overtighten it; the bolt hole wasn't finished well and a jagged edge caught on the bolt and flaked off. I was ready to trash it but I've also ridden it hard plenty times since then and it's still holding up. I will probably use it on my indoor trainer bike just to be safe.
#22
Senior Member
Join Date: Jun 2015
Location: South Korea
Posts: 783
Bikes: Merida Speeder
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 233 Post(s)
Liked 165 Times
in
115 Posts
I think OP was just saying "Asian" as a euphamism for cheap Chinese Aliexpress type cycling clothing. Yes, a lot of what we buy is made in China, but that has quality control and warranties, I'm sure OP means stuff like the $12 "Fox" MTB jerseys, the gillet and arm warmers/sun protectors I bought on Aliexpress the other day. Cheap clothing from unknown manufacturers in China that can be as good as or better than name brands and last longer, or that will crap out after one ride.
What's off brand in cycling? I'd consider anything like the Sunshine cassettes (borrowing from Sunrace) or the Wuzei stuff (with a red "W" like the Specialized "S") to be off brand. Anything that's clearly derivative, instead of having its own name. LTwoo, to my mind, isn't off brand. It may be cheap and perhaps not as good as products from the larger drivetrain component manufacturers, but they're not just copying other products, they are trying to innovate. That's IMO, I'm sure they have copied stuff, I get it, they may not be entirely original, but they are not calling themselves Shinamo or something similar.
Lastly, I'd think twice about anything made of Chinese carbon. The old adage of "Think cheap, durable and light. Now choose two." rings true, in that light, cheap carbon components may not be the longest lasting. Sometimes the vacuum process doesn't work properly and there are voids within the products, sometimes the fibres are poorly laid--one of the most skilled and highly-paid jobs at the Giant factory in Taiwan--so that their orientation doesn't yield optimal strength, and sometimes the resin is of poor quality. They did solve the issue of UV delamination, where direct sunlight would cause the carbon to come apart, but it's illustrative of the problems you can have with cheap carbon. You need to know what you're doing when you make it, and too many small factories in China are cutting corners and producing a substandard product.
What's off brand in cycling? I'd consider anything like the Sunshine cassettes (borrowing from Sunrace) or the Wuzei stuff (with a red "W" like the Specialized "S") to be off brand. Anything that's clearly derivative, instead of having its own name. LTwoo, to my mind, isn't off brand. It may be cheap and perhaps not as good as products from the larger drivetrain component manufacturers, but they're not just copying other products, they are trying to innovate. That's IMO, I'm sure they have copied stuff, I get it, they may not be entirely original, but they are not calling themselves Shinamo or something similar.
Lastly, I'd think twice about anything made of Chinese carbon. The old adage of "Think cheap, durable and light. Now choose two." rings true, in that light, cheap carbon components may not be the longest lasting. Sometimes the vacuum process doesn't work properly and there are voids within the products, sometimes the fibres are poorly laid--one of the most skilled and highly-paid jobs at the Giant factory in Taiwan--so that their orientation doesn't yield optimal strength, and sometimes the resin is of poor quality. They did solve the issue of UV delamination, where direct sunlight would cause the carbon to come apart, but it's illustrative of the problems you can have with cheap carbon. You need to know what you're doing when you make it, and too many small factories in China are cutting corners and producing a substandard product.
Last edited by PDKL45; 03-27-23 at 06:31 PM.
#23
Senior Member
I try to avoid Chinese as much as I can, but mainly because I view Communist China as an enemy nation. I have no problems buying Taiwan though. In fact, I look for it.
#24
Grupetto Bob
Join Date: Sep 2020
Location: Seattle-ish
Posts: 6,226
Bikes: Bikey McBike Face
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 2585 Post(s)
Liked 5,648 Times
in
2,924 Posts
With all due respect to Jen, I see people living, loving their family, trying to make a living, regardless of the country as just people. People in China, due to propaganda, may see us the same way, but you, me, Jen are just people, not enemies either. I don’t condemn the people of any nation because they were born there. Many Chinese and Russians despise their country but are forced into silence or jailed or worse. As far as I am concerned, People can shop or not shop wherever they want and I respect that.
That said, since the vast majority of items we for our households come from China, and I use AliExpress to buy jerseys, cycling gloves, shoe covers, cadence, speed and heart rate sensors which are compatible with my Garmin devices. I would not buy any item from them which could possibly fail and jeopardize my safety, like carbon fiber seat posts, cranks, and especially handlebars.
If we go to war, then no more AliExpress.
That said, since the vast majority of items we for our households come from China, and I use AliExpress to buy jerseys, cycling gloves, shoe covers, cadence, speed and heart rate sensors which are compatible with my Garmin devices. I would not buy any item from them which could possibly fail and jeopardize my safety, like carbon fiber seat posts, cranks, and especially handlebars.
If we go to war, then no more AliExpress.
__________________
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
Last edited by rsbob; 03-27-23 at 09:20 PM.
Likes For rsbob:
#25
Senior Member
Join Date: Dec 2019
Location: South Shore of Long Island
Posts: 2,800
Bikes: 2010 Carrera Volans, 2015 C-Dale Trail 2sl, 2017 Raleigh Rush Hour, 2017 Blue Proseccio, 1992 Giant Perigee, 80s Gitane Rallye Tandem
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1088 Post(s)
Liked 1,026 Times
in
723 Posts
SMP saddles for me. I use the Stratos with standard padding. No cheap saddles.
I own two Yoeleo R12 frames with seatposts and integrated bar/stems from Yoeleo. No problems. There are several brands of Chinese companies making high quality carbon components, selling direct. Yoeleo prices have gone up substantially this year.
BTLOS wheels are high quality for around $800.
I've bought two jerseys from China one has been good, the other was longer than normal, wouldn't use that company again. No cheap bibs for me, but I buy good stuff only when discounted.
I own two Yoeleo R12 frames with seatposts and integrated bar/stems from Yoeleo. No problems. There are several brands of Chinese companies making high quality carbon components, selling direct. Yoeleo prices have gone up substantially this year.
BTLOS wheels are high quality for around $800.
I've bought two jerseys from China one has been good, the other was longer than normal, wouldn't use that company again. No cheap bibs for me, but I buy good stuff only when discounted.
OP, not certain how to truly define the term off-brand but when it comes to stems, forks, handlebars and seatposts I don't trust anything that is clearly intended to be a knock off or by a brand that doesn't have an established reputation, though if they have US or EU distribution centers I'm more trusting of newer items.