New horse in the stable
#1
Senior Member
Thread Starter
New horse in the stable
Picked up a K2 last week. Got it fairly cheap because the big chain ring has a couple chipped teeth. Main reason I got it was because it actually came with Shimano 105. I rewrapped the handlebar tape a couple days ago because the original stuff was literally rubbing off on anything that touched it, put my aero bars and some cheap pedals on it. I took it out today for my first real ride (beyond testing it in a parking lot), rode 28 miles. Got to say, I'm really happy with this bike. Still need to replace that chain ring but this bike is every bit as quick as my Specialized Roubiax.
I like it!
I like it!
Likes For VegasJen:
#3
Senior Member
Thread Starter
Thanks. Don't know much about K2. Little research says they got bought out some time ago. I knew it was an older bike when I got it but aside from some scrapes here and there, it's in really good condition overall. Like I said earlier, main reason I bought it was for the 105 hardware. CF front fork and rear seat stays(?) on an aluminum frame make it pretty light and comfortable. I do need to change that chain ring but even with it, the bike rides fine. I'm really happy with it. Even putting new bar tape and pedals on it I'm still in for under $300. I don't think that's too bad at all.
Now I need to sell off a couple others that just gather dust.
Now I need to sell off a couple others that just gather dust.
#4
Should Be More Popular
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 43,052
Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix
Mentioned: 560 Post(s)
Tagged: 2 Thread(s)
Quoted: 22598 Post(s)
Liked 8,925 Times
in
4,158 Posts
#6
Senior Member
Join Date: Sep 2005
Location: In the foothills of Los Angeles County
Posts: 25,290
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 8279 Post(s)
Liked 9,038 Times
in
4,475 Posts
A friend had a K2 road bike years ago. It was a fine ride and he went fast on it. I had a K2 mountain bike which broke in half after I flogged it for 10 years.
#7
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,987
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6193 Post(s)
Liked 4,809 Times
in
3,317 Posts
Do the chipped teeth on the ring cause any issues? If no issues directly caused by them then I wouldn't replace.
We might should eventually get into a discussion of how to photograph your bike! But I'll leave that for later. It's a little more involved than how to properly take a picture of your watch.
We might should eventually get into a discussion of how to photograph your bike! But I'll leave that for later. It's a little more involved than how to properly take a picture of your watch.
#8
Senior Member
Thread Starter
Thanks, but I put the bars on for a reason.
Didn't cause any issues when I road it yesterday. It's obvious the chain got really worn and that's what did the damage but all the other gears look good and the chain had to have been replaced because this one looks pretty tight. I'll eventually replace that ring but it's not a priority.
Do the chipped teeth on the ring cause any issues? If no issues directly caused by them then I wouldn't replace.
We might should eventually get into a discussion of how to photograph your bike! But I'll leave that for later. It's a little more involved than how to properly take a picture of your watch.
We might should eventually get into a discussion of how to photograph your bike! But I'll leave that for later. It's a little more involved than how to properly take a picture of your watch.
#9
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,629
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,568 Times
in
1,579 Posts
Hard to imagine how a worn chain could chip teeth off the chainring without totally ruining it. More likely, you're looking at teeth that were deliberately shaped to be shorter to aid shifting.
#10
Senior Member
Thread Starter
OK. I'll go with that since I really don't know. I assumed it was chipping because it's not all the teeth, only four or five. But I'll post a pic in a bit so you can see what I'm talking about. Maybe some of you with more experience can diagnose what happened here.
#11
Senior Member
Thread Starter
So here's a close up pic of the chain ring I'm talking about. I put a RED arrow on the "chipped" teeth and BLUE arrows on teeth that have "scalloping", presumably from a worn chain. If anybody has a better diagnosis, I'm all ears. Not even pretending to know what I'm talking about.
#12
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,629
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,568 Times
in
1,579 Posts
So here's a close up pic of the chain ring I'm talking about. I put a RED arrow on the "chipped" teeth and BLUE arrows on teeth that have "scalloping", presumably from a worn chain. If anybody has a better diagnosis, I'm all ears. Not even pretending to know what I'm talking about.
Likes For ThermionicScott:
#13
Senior Member
Thread Starter
Likes For VegasJen:
#14
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,629
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,568 Times
in
1,579 Posts
Yep, looks like it has many more happy miles left in it. If you look at the middle ring, you'll see some short teeth there, too. No need to replace any of them.
#15
Senior Member
Thread Starter
Man, that is awesome! Thanks. I guess it's good for me that the seller didn't know any better either. I was going to walk away from this bike because of that but the seller took $100 off his asking price. Wasn't trying to play him but looks like ignorance on both of us worked in my favor.
Likes For VegasJen:
#16
Senior Member
Join Date: Oct 2016
Posts: 728
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 365 Post(s)
Liked 419 Times
in
248 Posts
ThermionicScott is right. They're called "ramps", and they're molded (or milled?) into the chainring to make shifting easier and smoother. You can google "chainring ramps" for info and pictures, to put your mind completely at rest regarding this.
(edit: I was wrong, I've gotten my terminology wrong. The "ramps" are on the inner surface of the chainring. I'm not sure what they call the shaping of the chainring teeth, but TS is right, the shaping is intentional, to aid in shifting. The chainring in your picture looks to be in great shape, many, many miles of wear left.)
(edit: I was wrong, I've gotten my terminology wrong. The "ramps" are on the inner surface of the chainring. I'm not sure what they call the shaping of the chainring teeth, but TS is right, the shaping is intentional, to aid in shifting. The chainring in your picture looks to be in great shape, many, many miles of wear left.)
Last edited by noimagination; 07-06-22 at 06:52 AM.
#17
Senior Member
Join Date: Jul 2015
Location: reno, nv
Posts: 2,300
Bikes: yes, i have one
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 1138 Post(s)
Liked 1,182 Times
in
687 Posts
So here's a close up pic of the chain ring I'm talking about. I put a RED arrow on the "chipped" teeth and BLUE arrows on teeth that have "scalloping", presumably from a worn chain. If anybody has a better diagnosis, I'm all ears. Not even pretending to know what I'm talking about.
#18
Method to My Madness
Join Date: Nov 2020
Location: Orange County, California
Posts: 3,662
Bikes: Trek FX 2, Cannondale Synapse, Cannondale CAAD4, Santa Cruz Stigmata GRX
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 1947 Post(s)
Liked 1,469 Times
in
1,018 Posts
Agree with everyone who said that the teeth of the big chain ring are deliberately shaped that way for shifting. In fact, this photo shows that the original owner rarely used and/or only cleaned the big chain ring.
#19
Senior Member
Join Date: May 2022
Location: USA - Southwest PA
Posts: 3,082
Bikes: Cannondale - Gary Fisher - Giant - Litespeed - Schwinn Paramount - Schwinn (lugged steel) - Trek OCLV
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 1397 Post(s)
Liked 1,877 Times
in
1,080 Posts
#20
Senior Member
Join Date: May 2022
Location: USA - Southwest PA
Posts: 3,082
Bikes: Cannondale - Gary Fisher - Giant - Litespeed - Schwinn Paramount - Schwinn (lugged steel) - Trek OCLV
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 1397 Post(s)
Liked 1,877 Times
in
1,080 Posts
the bike was leaning against a dumpster in the back of a large parking lot where I parked
took a quick look at the bike and saw the rear wheel / drivetrain was damaged - and thought the owner might return with a car to get the bike
but the bike was still sitting in this spot two days later - so I grabbed it before it was taken / destroyed by garbage pickup
new RD, chain, fixed / trued rear wheel and it was ready to go
bike endured two kids - second kid especially rode it fairly hard - and I still use it now and then around our house
#21
Senior Member
Join Date: Sep 2005
Location: In the foothills of Los Angeles County
Posts: 25,290
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 8279 Post(s)
Liked 9,038 Times
in
4,475 Posts