Flat pedal lifespan & Recommendations
#1
Member
Thread Starter
Join Date: Jan 2013
Location: Queens, NY
Posts: 49
Bikes: An old Panasonic Sport
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Liked 28 Times
in
19 Posts
Flat pedal lifespan & Recommendations
Hello, first some background:
I’m riding 5 days a week commuting in NYC through some very bumpy and rough roads. I typically wear steel toe boots during these rides. I weigh about 180lbs. I go over a bridge every ride so I’m pushing hard every ride.
I was using Zacro Pedals and the first pair lasted 6 months and the replacement pair lasted 8 months before the right one snapped off. Is this a normal lifespan for hard use? Any recommendations for a mountain bike style flat pedal that might be better? I’d rather keep the budget around $50 but don’t mind going higher if it’s a quality product that will last.
Thank you!
I’m riding 5 days a week commuting in NYC through some very bumpy and rough roads. I typically wear steel toe boots during these rides. I weigh about 180lbs. I go over a bridge every ride so I’m pushing hard every ride.
I was using Zacro Pedals and the first pair lasted 6 months and the replacement pair lasted 8 months before the right one snapped off. Is this a normal lifespan for hard use? Any recommendations for a mountain bike style flat pedal that might be better? I’d rather keep the budget around $50 but don’t mind going higher if it’s a quality product that will last.
Thank you!
#2
Senior Member
You are buying off brand / cheaper pedals which is why they are not lasting. Go with a good name brand pedals that can be rebuilt and they should last.
My high mileage pedal is a Wellgo MG1. One pair has over 10,000 miles on them and they have yet to give me a problem. There are plenty others out there.
My high mileage pedal is a Wellgo MG1. One pair has over 10,000 miles on them and they have yet to give me a problem. There are plenty others out there.
Likes For katsup:
#3
Senior Member
Join Date: Dec 2010
Location: northern Deep South
Posts: 8,932
Bikes: Fuji Touring, Novara Randonee
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 2612 Post(s)
Liked 1,956 Times
in
1,226 Posts
Check out Touring and City Pedals - Velo Orange (velo-orange.com)
I'm not sure whether the Sabot or Touring pedals would work best with your work boots.
I'm not sure whether the Sabot or Touring pedals would work best with your work boots.
Likes For pdlamb:
#4
Senior Member
Join Date: Feb 2017
Location: Hollister, CA (not the surf town)
Posts: 1,740
Bikes: 2019 Specialized Roubaix Comp Di2, 2009 Roubaix, early 90's Giant Iguana
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 644 Post(s)
Liked 1,536 Times
in
553 Posts
No pedal should snap off, not even cheap plastic ones from a big box store. Could result in serious injuries in the right circumstance.
Likes For Ogsarg:
#5
Cheerfully low end
Join Date: Jun 2020
Posts: 1,979
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 646 Post(s)
Liked 1,045 Times
in
668 Posts
I got about 10K miles each from a pair of Odyssey Grandstand pedals before I retired them in favor of platform pedals with sealed bearings instead of bushings. Now I’m running MKS RMX pedals on the road frame and VP-538 pedals on the MTB. Both MKS and VP are good pedal makers.
Otto
Otto
Likes For ofajen:
#6
Senior Member
When I've had pedals fail in the past, it's been because the bearings in them seize and the pedal just won't turn any more. Never had one break off though.
It's been many years though..... Haven't had a pedal go bad since I stopped riding cheap hand-me-down bikes.
It's been many years though..... Haven't had a pedal go bad since I stopped riding cheap hand-me-down bikes.
Likes For Reflector Guy:
#7
Disco Infiltrator
Join Date: May 2013
Location: Folsom CA
Posts: 13,459
Bikes: Stormchaser, Paramount, Tilt, Samba tandem
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 3130 Post(s)
Liked 2,111 Times
in
1,374 Posts
The problem with ordering Amazon alphabet-soup stuff is that you don't really know if they are giving you what you paid for. Does that Fooker pedal really have a chromoly axle? Was it heat treated properly? Does the guy cloning it really understand what he's drawing or is he just making a look alike copy? Who knows? The reviews are usually "I opened the box and found a pedal that I installed on my Huffy and it worked so much better," which is useless for assessing if something might last ten years or 10,000 miles. What you get in return for that risk is that it costs basically exactly half of the Race Face Chester pedal it's counterfeiting.
What then do you get from that Race Face pedal? Well who knows who "Fooker" is but Race Face has been around a while, is part of a conglomerate that will continue to be around a while, will sell you replacement small parts (rebuild kits, axles, studs). You get a warranty you can believe in.
Worth it? I dunno. It's only twenty bucks.
What then do you get from that Race Face pedal? Well who knows who "Fooker" is but Race Face has been around a while, is part of a conglomerate that will continue to be around a while, will sell you replacement small parts (rebuild kits, axles, studs). You get a warranty you can believe in.
Worth it? I dunno. It's only twenty bucks.
__________________
Genesis 49:16-17
Genesis 49:16-17
Likes For Darth Lefty:
#8
Tragically Ignorant
Join Date: Jun 2018
Location: New England
Posts: 15,613
Bikes: Serotta Atlanta; 1994 Specialized Allez Pro; Giant OCR A1; SOMA Double Cross Disc; 2022 Allez Elite mit der SRAM
Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 8186 Post(s)
Liked 9,098 Times
in
5,054 Posts
Raceface Chesters. If there's a way to wear them out, I haven't figured it out yet. I have them on 4 bikes, and have never had to do anything to maintain them. I believe I have about 10k miles on the first pair I bought.
Likes For livedarklions:
#9
Disco Infiltrator
Join Date: May 2013
Location: Folsom CA
Posts: 13,459
Bikes: Stormchaser, Paramount, Tilt, Samba tandem
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 3130 Post(s)
Liked 2,111 Times
in
1,374 Posts
From the factory, one of my Chesters squeaked and over a year developed play. And they faded badly quickly. Instead of spending twenty bucks trying to rebuild it I spent twenty bucks on Rock Bros pedals. If I die I'll report back.
__________________
Genesis 49:16-17
Genesis 49:16-17
Likes For Darth Lefty:
#10
Very Senior Member
Join Date: Mar 2018
Location: Always on the Run
Posts: 1,211
Bikes: Giant Quasar & Fuji Roubaix
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 413 Post(s)
Liked 343 Times
in
244 Posts
I absolutely love my Rock Bros. When I got rid of my MTB I put them on my road bike I love them so much. I rode hard with combat boots before switching to road and must have well over 10K with absolutely no problems and they are still going strong. I have the 4 bushing style.
Likes For Bigbus:
Likes For Germany_chris:
#12
Senior Member
Join Date: May 2021
Posts: 8,586
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 4482 Post(s)
Liked 4,953 Times
in
3,062 Posts
Shimano Saint pedals pretty much last forever. They are a fit and forget product. There are other decent brands of flat pedal, but some require a bit of bearing maintenance while Shimano pedals generally don't.
Likes For PeteHski:
#13
Me duelen las nalgas
Join Date: Aug 2015
Location: Texas
Posts: 13,512
Bikes: Centurion Ironman, Trek 5900, Univega Via Carisma, Globe Carmel
Mentioned: 199 Post(s)
Tagged: 0 Thread(s)
Quoted: 4560 Post(s)
Liked 2,803 Times
in
1,801 Posts
iSSi Thump pedals are good, serviceable and cost $40 with molded pins, $50 for the version with metal replaceable pins. Generous platform, enough for riding with boots. I've been riding a set for a couple of years, no problems.
Before getting the iSSi pedals I used Stolen Brand Thermalite BMX pedals for a couple of years. Those withstood banging against rocks, crashes, etc. They loosened up after a couple of years and aren't easily serviceable, but for only $15 I couldn't complain.
Before getting the iSSi pedals I used Stolen Brand Thermalite BMX pedals for a couple of years. Those withstood banging against rocks, crashes, etc. They loosened up after a couple of years and aren't easily serviceable, but for only $15 I couldn't complain.
Likes For canklecat:
#14
Senior Member
thats what I have too. Great pedal with a great grip
Likes For coffeesnob:
#15
Senior Member
I absolutely love my Rock Bros. When I got rid of my MTB I put them on my road bike I love them so much. I rode hard with combat boots before switching to road and must have well over 10K with absolutely no problems and they are still going strong. I have the 4 bushing style.
Likes For Reflector Guy:
#16
Senior Member
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,829
Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1950 Post(s)
Liked 2,188 Times
in
1,332 Posts
I’ve been using Wellgo MG-1’s on my mtb’s for quite a while and have held up fine with a few hits, but may not take real severe abuse.
That said, I have a couple pairs of older Wellgo B-67’s that really seem bombproof, but at 540 grams they better be.
John
That said, I have a couple pairs of older Wellgo B-67’s that really seem bombproof, but at 540 grams they better be.
John
Likes For 70sSanO:
#17
Cheerfully low end
Join Date: Jun 2020
Posts: 1,979
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 646 Post(s)
Liked 1,045 Times
in
668 Posts
I’ve had good luck with Wellgo branded pedals over the years. From what I can tell, about 80% of the high end pedal production comes from the Wellgo factory in Taichung, including those sold under many other brand names. Most of the rest of the high end production would be speciality facilities including MKS and Shimano in Japan. But that is only a small part of pedal production in total, the rest is mainly low end pedals made in China.
Otto
Otto
Likes For ofajen:
#18
Member
Thread Starter
Join Date: Jan 2013
Location: Queens, NY
Posts: 49
Bikes: An old Panasonic Sport
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Liked 28 Times
in
19 Posts
Thanks for all the replies. I knew it was a gamble buying some no name brand off Amazon but I figured for $30 it was a gamble worth taking.
#19
Tragically Ignorant
Join Date: Jun 2018
Location: New England
Posts: 15,613
Bikes: Serotta Atlanta; 1994 Specialized Allez Pro; Giant OCR A1; SOMA Double Cross Disc; 2022 Allez Elite mit der SRAM
Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 8186 Post(s)
Liked 9,098 Times
in
5,054 Posts
Well, you definitely lost that bet, and I'm glad you weren't injured when the pedal snapped off.
Race Face came out with a new line of pedals a couple years ago--the "Ride". Basically looks like a Chester without the metal pins, molded "pins" instead. $35 and it looks like you can actually find some available right now. Chesters seem to be out of stock in a lot of places.
Likes For livedarklions:
#20
Live not by lies.
Join Date: Nov 2020
Posts: 1,306
Bikes: BigBox bikes.
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 860 Post(s)
Liked 784 Times
in
582 Posts
Maybe lock them in the gang box?
That won’t necessarily make your pedals last longer.
But I get out of my work boots ASAP.
Used to sneak in wearing flip flops until the suits caught me.
Likes For SkinGriz:
#21
Member
Thread Starter
Join Date: Jan 2013
Location: Queens, NY
Posts: 49
Bikes: An old Panasonic Sport
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Liked 28 Times
in
19 Posts
I feel like I’m a tiny bit more safe riding with steel toe construction boots. I feel like I may be a bit more protected in the event of a crash or collision or whatever may happen.
#22
Senior Member
Join Date: Jul 2006
Location: Jacksonville, FL
Posts: 6,906
Bikes: Trek Domane SLR 7 AXS, Trek CheckPoint SL7 AXS, Trek Emonda ALR AXS, Trek FX 5 Sport
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 776 Post(s)
Liked 1,783 Times
in
1,030 Posts
For Flat pedals, I really like the Xpedo Spry. Very grippy and very light...
https://xpedo.com/product/pedals/flats/spry/
https://xpedo.com/product/pedals/flats/spry/
Likes For jaxgtr:
#23
Member
Thread Starter
Join Date: Jan 2013
Location: Queens, NY
Posts: 49
Bikes: An old Panasonic Sport
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Liked 28 Times
in
19 Posts
Thanks for all the recommendations. Good to know some of the quality brands.
I went with the wellgo MG-1s. First ride with them today and they felt good. Not quite as grippy as my previous pedals but my foot felt secure. Only time will tell how they hold up. I’ll update this thread at a later date.
Ride safely.
I went with the wellgo MG-1s. First ride with them today and they felt good. Not quite as grippy as my previous pedals but my foot felt secure. Only time will tell how they hold up. I’ll update this thread at a later date.
Ride safely.
Likes For Vismund B:
#24
Tragically Ignorant
Join Date: Jun 2018
Location: New England
Posts: 15,613
Bikes: Serotta Atlanta; 1994 Specialized Allez Pro; Giant OCR A1; SOMA Double Cross Disc; 2022 Allez Elite mit der SRAM
Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 8186 Post(s)
Liked 9,098 Times
in
5,054 Posts
Thanks for all the recommendations. Good to know some of the quality brands.
I went with the wellgo MG-1s. First ride with them today and they felt good. Not quite as grippy as my previous pedals but my foot felt secure. Only time will tell how they hold up. I’ll update this thread at a later date.
Ride safely.
I went with the wellgo MG-1s. First ride with them today and they felt good. Not quite as grippy as my previous pedals but my foot felt secure. Only time will tell how they hold up. I’ll update this thread at a later date.
Ride safely.
You didn't answer the most important question--what color?
#25
Advanced Slacker
Join Date: Feb 2017
Posts: 6,213
Bikes: Soma Fog Cutter, Surly Wednesday, Canfielld Tilt
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 2763 Post(s)
Liked 2,537 Times
in
1,433 Posts
There are many $50 pedals with high quality bearings that are rebuildable.
Kona Wha Wha 2 Composite and Deity Deftrap are two that I have. These are both quality, respected brands.
Kona Wha Wha 2 Composite and Deity Deftrap are two that I have. These are both quality, respected brands.
Likes For Kapusta: