gearing vs power vs grade...
#26
Senior Member
I go up a 10-12% grade regularly and use the lowest gear ratio that's readily available for my sram force axs 12 speed drivetrain. With all sram parts, they offer a 43/30 crank and 10-36 cassette. A 30/36 ratio works great at speeds in the 4-5 mph range. I don't want to give up top gearing, so I use Shimano grx cranks - either a 48/31 or 46/30. I only weigh 135, but I'm 68 years old now and don't have the power I used too. I do a fair amount of pedaling standing and I can do this same steep climb pedaling standing, but my 31/28 ratio is a bit too low and the 31/24 only allows a cadence around 50, which seems like a grind, so I prefer to sit through this climb. My replaced knees probably appreciate it too. I ride out of the saddle in the big ring, quite a bit on lesser slopes. I regularly ride a 52 mile loop from Loveland to Estes Park - sometimes through Glen Haven and sometimes not. The Glen Haven route has the steep climb.
Today I took a different route with a 4.5 mile climb that has several 10% sections, but nothing exceeding 10%. I was able to ride those sections standing in my 31/24 or sitting in my 31/32 and never used my 36T sprocket. I have gained some strength in the 3rd year of my comeback to cycling, but you can't always keep ahead of old age. As some point, I'll quit improving and start the downhill slide again. I certainly won't get rid of the 36T sprocket.
On of my biggest complaints about SRAM's drivetrain offerings is the 13T difference on every crankset. Just not enough range. That's why I've never used a SRAM crank.
Today I took a different route with a 4.5 mile climb that has several 10% sections, but nothing exceeding 10%. I was able to ride those sections standing in my 31/24 or sitting in my 31/32 and never used my 36T sprocket. I have gained some strength in the 3rd year of my comeback to cycling, but you can't always keep ahead of old age. As some point, I'll quit improving and start the downhill slide again. I certainly won't get rid of the 36T sprocket.
On of my biggest complaints about SRAM's drivetrain offerings is the 13T difference on every crankset. Just not enough range. That's why I've never used a SRAM crank.
Last edited by DaveSSS; 06-28-21 at 01:27 PM.
Likes For DaveSSS:
#27
Banned
The lowest gear I have ever used is 45/28 and the 28 replaced a stock 26 tooth cog as I wanted an ultra low gear going over the sierras with a 15 lb load of touring gear on the bike. The cog dished and I finished the trip with 45/24 gears on the grades. That was in the days when "racing" bikes had 45/52 chainrings at the front and only mountain bikes or special world touring bike had smaller chainrings. Now it is common to equip racing bikes with 36/32 gears which is very very low.
Stock bikes often have less than optimum gears for the people who ride them and more bike shops should recommend changing them for their customers.
Stock bikes often have less than optimum gears for the people who ride them and more bike shops should recommend changing them for their customers.
#28
climber has-been
Join Date: Dec 2004
Location: Palo Alto, CA
Posts: 7,111
Bikes: Scott Addict R1, Felt Z1
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 3432 Post(s)
Liked 3,567 Times
in
1,793 Posts
bikecalc.com
Sonora Pass has sections in excess of 20%.
Sonora Pass Rd, near Hwy 395
That 26% section:
Last edited by terrymorse; 07-01-21 at 05:17 PM. Reason: added photo
#29
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 7,986
Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 4946 Post(s)
Liked 8,087 Times
in
3,826 Posts
Oh, hell no.
__________________
"Swedish fish. They're protein shaped." - livedarklions
"Swedish fish. They're protein shaped." - livedarklions
Likes For Eric F: