Nitto Pearl stem NIB
#1
Senior Member
Thread Starter
Nitto Pearl stem NIB
SOLD
__________________
Semper fi
Semper fi
Last edited by sloar; 05-18-24 at 08:44 PM.
#2
Senior Member
This is a crazy good deal!
__________________
The Simplicity of Vintage Cycles
The Simplicity of Vintage Cycles
#3
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 13,321
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Liked 4,331 Times
in
2,788 Posts
I'm in! PM coming. My first TiCycles I had built for a 12 cm stem. Fit is right on perfect. But threadless. I had tie forsight to order the stem 1" steel. So it goes back to Ti Cycles, get's cut down and threaded. That sweet Pearl dropped on.
And edit: (had to get that post off fast! I want that stem!) Nitto Pearl length is roughly the same as a Cinelli 1 cm larger. Nitto measures its Pearls center of handlebar to perpendicular to the head tube axis like a threadless stem, not cneter of handlebar top to top center of quill bolt heard like most quill stems are measured. Happens that an 11 (Pearl) is near exactly a 12 (traditional). Difference gets bigger as the size goes up, smaller as it comes down.
And edit: (had to get that post off fast! I want that stem!) Nitto Pearl length is roughly the same as a Cinelli 1 cm larger. Nitto measures its Pearls center of handlebar to perpendicular to the head tube axis like a threadless stem, not cneter of handlebar top to top center of quill bolt heard like most quill stems are measured. Happens that an 11 (Pearl) is near exactly a 12 (traditional). Difference gets bigger as the size goes up, smaller as it comes down.
Last edited by 79pmooney; 05-18-24 at 05:05 PM.