ISO and For Trade thread parts 2 and 3.
#8451
Señor Member
Join Date: Jul 2009
Location: Boston Burbs
Posts: 1,637
Bikes: Bedford, IF, Hampsten, DeSalvo, Intense Carbine 27.5, Raleigh Sports, Bianchi C.u.S.S, Soma DC Disc, Bill Boston Tandem
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
I'd really like to find a long pantographed Ciöcc seatpost (longer than the post pictured below).
I have this aero Campy seatpost to trade/partial trade/whatever. It came with a Ciöcc I recently purchased. The guy I bought it from noted the hand-drilled "pits" and thought that a previous owner of the seatpost probably did this to try to create a tighter fit with another bike. At this point the "crater lips" that would have been created via drilling are gone, leaving a smooth shaft. The pits are cosmetic only, and won't show once the seatpost is inserted into the seat tube.
I have this aero Campy seatpost to trade/partial trade/whatever. It came with a Ciöcc I recently purchased. The guy I bought it from noted the hand-drilled "pits" and thought that a previous owner of the seatpost probably did this to try to create a tighter fit with another bike. At this point the "crater lips" that would have been created via drilling are gone, leaving a smooth shaft. The pits are cosmetic only, and won't show once the seatpost is inserted into the seat tube.
#8452
Senior Member
Join Date: Jul 2006
Posts: 3,065
Mentioned: 63 Post(s)
Tagged: 0 Thread(s)
Quoted: 1217 Post(s)
Liked 187 Times
in
118 Posts
Did some spring cleaning today, let's see if I can trade these away!
Have:
1.) Steel 52t 130BCD chainring. Looks to be in very good shape with only a little wear.
2.) SR SP250 Pedals. These are typical 80s road pedals. Work well with clips and straps but may need to have the rear lip taken down a little bit if you ride in soft-soled shoes.
3.) Iscaselle Triathlon Saddle. If you like curved saddles similar to the Selle San Marco Concor you'll like this one. Has some very small chunks missing from the front and rear and surface rust on the rails, otherwise good condition.
4.) Retrogression V.track pedal straps. These were my extra pair. Probably have <700 miles on them. They show some wear and a little fuzziness but otherwise good condition.
Want:
+Decent quality 6/7/8 speed chain 3/32"
+Mid-level 1/8" 17t cog. (All-city, eigthinch, etc.)
+25c/28c tubes
+KMC 1/8" chain
Have:
1.) Steel 52t 130BCD chainring. Looks to be in very good shape with only a little wear.
2.) SR SP250 Pedals. These are typical 80s road pedals. Work well with clips and straps but may need to have the rear lip taken down a little bit if you ride in soft-soled shoes.
3.) Iscaselle Triathlon Saddle. If you like curved saddles similar to the Selle San Marco Concor you'll like this one. Has some very small chunks missing from the front and rear and surface rust on the rails, otherwise good condition.
4.) Retrogression V.track pedal straps. These were my extra pair. Probably have <700 miles on them. They show some wear and a little fuzziness but otherwise good condition.
Want:
+Decent quality 6/7/8 speed chain 3/32"
+Mid-level 1/8" 17t cog. (All-city, eigthinch, etc.)
+25c/28c tubes
+KMC 1/8" chain
#8453
Tyrannosaurus Rexitis
Join Date: Mar 2011
Location: Cape Cod, MA
Posts: 934
Bikes: Scott Addict 6870
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 60 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Have: (nothing else in picture available)
6207 bits: shift levers (partial hardware?), crankset (BB+arms+rings+bolts), brake calipers (recessed mount), RD. Also have 7 speed Sachs chain. Dull but look to be in decent condition. Some oxidation on fasteners
Shimano 600 AX seatpost (6300) 27.2, in need of a shine but not rusted. Super nice post once cleaned up. Has a set screw to keep your angle even when loosening the clamping mechanism.
Exage aero levers with hoods in 4/10 shape.
7s Deore indexed thumbies.
Need:
I'm looking for 8s indexed shimano bar end shifters and flared/dirt/rando drop bars. Not suuper flared. Please respond via PM or email.
Also looking for crank bolts for the granny gear on my triple crank. Need 5 bolts that go right into the spider.
6207 bits: shift levers (partial hardware?), crankset (BB+arms+rings+bolts), brake calipers (recessed mount), RD. Also have 7 speed Sachs chain. Dull but look to be in decent condition. Some oxidation on fasteners
Shimano 600 AX seatpost (6300) 27.2, in need of a shine but not rusted. Super nice post once cleaned up. Has a set screw to keep your angle even when loosening the clamping mechanism.
Exage aero levers with hoods in 4/10 shape.
7s Deore indexed thumbies.
Need:
I'm looking for 8s indexed shimano bar end shifters and flared/dirt/rando drop bars. Not suuper flared. Please respond via PM or email.
Also looking for crank bolts for the granny gear on my triple crank. Need 5 bolts that go right into the spider.
Last edited by Harlan; 05-03-12 at 05:49 PM.
#8454
Senior Member
Join Date: Aug 2003
Location: Tampa, Florida
Posts: 13,954
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 413 Post(s)
Likes: 0
Liked 109 Times
in
78 Posts
ISO: Small flange Campagnolo Record rear hub. 32 hole preferably with no thread markings. Condition of axle and races not important.
Anyone?
Anyone?
#8455
Senior Member
Join Date: Mar 2010
Location: Orlando, Florida
Posts: 625
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 7 Times
in
3 Posts
Hi friends, I have a Tommasini Prestige 58cm with Campy SR, that I would like to trade for a 70's or 80's Bianchi Celeste or anything with 531 or Colombus.
Last edited by flash2070; 05-04-12 at 07:26 PM. Reason: adding pics
#8457
Junior Member
Join Date: Apr 2012
Location: Tucson, Az
Posts: 22
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I've got a set of Campy Record hubs with Italian threads laced very nicely to a pair of Assos tubular rims in good condition. I am unsure of the hubs age. Anyone out there interested in trading a set of clinchers with iso threads for these bad boys? Alternatively, in search of a 7 speed freewheel with 35 x 24 tpi threading. I also have a SunTour V GT in sound mechanical shape, a Shimano 600 FD (FD-6207), a very long Cinelli stem, and Jeunet drop bars.
#8458
Senior Member
Join Date: Mar 2008
Location: Moorhead, MN
Posts: 998
Bikes: A few ;)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
1 Post
WTT: My polished, nutted first gen DA caliper brake set for your nutted, campy caliper brake set of equal sexiness.
WTT: My Shimano/DA cable guide set for your Campy cable guide set. DT cable stop, BB guide, 3x TT guides.
WTT: My first gen DA clamp on front derailleur for your Campy front derailleur. 8spd era preferred.
WTT: My Shimano/DA cable guide set for your Campy cable guide set. DT cable stop, BB guide, 3x TT guides.
WTT: My first gen DA clamp on front derailleur for your Campy front derailleur. 8spd era preferred.
__________________
Jason
Jason
#8459
Banned.
Join Date: Jul 2009
Location: PAZ
Posts: 12,294
Mentioned: 255 Post(s)
Tagged: 0 Thread(s)
Quoted: 2588 Post(s)
Liked 4,824 Times
in
1,709 Posts
I've got a set of Campy Record hubs with Italian threads laced very nicely to a pair of Assos tubular rims in good condition. I am unsure of the hubs age. Anyone out there interested in trading a set of clinchers with iso threads for these bad boys? Alternatively, in search of a 7 speed freewheel with 35 x 24 tpi threading. I also have a SunTour V GT in sound mechanical shape, a Shimano 600 FD (FD-6207), a very long Cinelli stem, and Jeunet drop bars.
DD
#8460
Senior Member
ISO: Suntour Winner Pro B20 cog. The kind with 15 splines.
ISO: Universal Super 68 side pull brake set - long reach preferred.
ISO: Campagnolo NR 52 or 53 tooth chainring, I prefer the early kind with no pin.
WTT: Suntour Winner Pro B21 in excellent condition.
email or PM cobrapatrol427(at)yahoo.com
WTT
First Gen Shimano Dura-Ace brake set - used
Selle San Marco Royale saddle - mint
Shimano 600 brakes, shifters, derailleurs - used
Sunshine Pro-Am HF hub set - mint
Campagnolo NR 26.8 seatpost
Sugino Super Mighty crankset 170mm, drillium 47-42 chainrings
several Regina freewheels
Campagnolo Record small flange rear hub with flat QR
more stuff - photos here on Parts to Trade
ISO: Universal Super 68 side pull brake set - long reach preferred.
ISO: Campagnolo NR 52 or 53 tooth chainring, I prefer the early kind with no pin.
WTT: Suntour Winner Pro B21 in excellent condition.
email or PM cobrapatrol427(at)yahoo.com
WTT
First Gen Shimano Dura-Ace brake set - used
Selle San Marco Royale saddle - mint
Shimano 600 brakes, shifters, derailleurs - used
Sunshine Pro-Am HF hub set - mint
Campagnolo NR 26.8 seatpost
Sugino Super Mighty crankset 170mm, drillium 47-42 chainrings
several Regina freewheels
Campagnolo Record small flange rear hub with flat QR
more stuff - photos here on Parts to Trade
Last edited by leaping_gnome; 05-04-12 at 09:12 AM.
#8461
Senior Member
Join Date: Dec 2008
Location: Conroe, TX
Posts: 1,620
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 47 Post(s)
Likes: 0
Liked 29 Times
in
14 Posts
I have this Blackburn rear rack that attaches to the brake bridge but I need something that attaches to the seat stays. I'd like to trade for the same rack or something similar that mounts to the stays.
Last edited by brockd15; 05-04-12 at 02:11 PM.
#8462
Velophile
Join Date: Mar 2009
Location: Seattle, WA
Posts: 1,094
Bikes: See Signature.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 13 Times
in
3 Posts
Need: Campagnolo Shifter Clamp Band and Bolt (I'd rather not drop $25 for a new one)
https://www.universalcycles.com/shopp...5&category=162
https://www.universalcycles.com/shopp...5&category=162
__________________
2009 Specialized Roubaix, 2013 Specialized Rockhopper 29er, 1996 Guerciotti PRX, 2016 Jamis Renegade Expat !
2009 Specialized Roubaix, 2013 Specialized Rockhopper 29er, 1996 Guerciotti PRX, 2016 Jamis Renegade Expat !
#8463
Senior Member
Join Date: Aug 2010
Location: Scottsdale, AZ
Posts: 159
Bikes: 3Rensho Super Record Export, Zunow Z-1, Andy Gilmour Breakaway, Sycip 26er
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I have a tubular wheelset I would love to trade for a clincher set: Campagnolo Super Record 36H High Flange Hubs + Campagnolo Victory Strada rims w/ Conti Tubulars (sloppy job). Needs to have sr High flange hubs too.
Also looking for a lone super record rear wheel 32H LF clincher wheel, brake levers, 27.2 seatpost, pedals.
Also looking for a lone super record rear wheel 32H LF clincher wheel, brake levers, 27.2 seatpost, pedals.
Last edited by irvri; 05-05-12 at 11:07 PM.
#8464
MIKE is my name!
Join Date: Mar 2012
Location: finland,baltimore
Posts: 2,846
Bikes: hans lutz, , puch mistral ultima,2x Austro Daimler Smoked chrome Ultima,Austro Daimler Mixte,Austro Daimler 531 mixte, flying arrow,F Moser,
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Liked 20 Times
in
4 Posts
ISO
Sugino Super Maxy crankset orjust the smaller chainwheel 170mm.
the larger 52 chainwheel is not removable. 52/39
picture stolen from velobase
in useable condition-no nos, no near perfect, scratched,dented fine with me.(cheap cheap cheap)
or help figuring this out so I can find something else,
(there is a set of sugino maxi of an older style on ebay now that would look better on my usa ride.)
In 1980 I took my cheap cardenalli with 3 piece cottered cranks and steel wheels apart and built it up with any alloy parts I could beg borrow or steal, I got a new set of Sugino Super maxi cranks, I spent my boyhood with my buddy cycling around baltimore county.
the bike went in the shed and 15 years later I took the cranks off and put them on my folding bike which I was traveling with.
Now I want to get my cardinalli in working order again, I brought over(stateside) a used set of cranks and after mounting noticed the outer chainwheel is maybe 5mm further outboard.
I looked for the smaller chainwheel but cant find it, odds are I threw it out.
my easiest solution is to just find the same set.
If you have a set you dont need tell me, then we figure out what you want to swap for it,
mike in finland and baltimore this summer.
Sugino Super Maxy crankset orjust the smaller chainwheel 170mm.
the larger 52 chainwheel is not removable. 52/39
picture stolen from velobase
in useable condition-no nos, no near perfect, scratched,dented fine with me.(cheap cheap cheap)
or help figuring this out so I can find something else,
(there is a set of sugino maxi of an older style on ebay now that would look better on my usa ride.)
In 1980 I took my cheap cardenalli with 3 piece cottered cranks and steel wheels apart and built it up with any alloy parts I could beg borrow or steal, I got a new set of Sugino Super maxi cranks, I spent my boyhood with my buddy cycling around baltimore county.
the bike went in the shed and 15 years later I took the cranks off and put them on my folding bike which I was traveling with.
Now I want to get my cardinalli in working order again, I brought over(stateside) a used set of cranks and after mounting noticed the outer chainwheel is maybe 5mm further outboard.
I looked for the smaller chainwheel but cant find it, odds are I threw it out.
my easiest solution is to just find the same set.
If you have a set you dont need tell me, then we figure out what you want to swap for it,
mike in finland and baltimore this summer.
Last edited by puchfinnland; 05-06-12 at 12:53 AM.
#8465
Banned.
Join Date: May 2011
Location: on the beach
Posts: 4,816
Bikes: '73 falcon sr, '76 grand record, '84 davidson
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 59 Post(s)
Likes: 0
Liked 22 Times
in
17 Posts
iso: campy sr 42t 144bcd chainring or sugino look-alike
campy nr type 3-window clamp-on front derailleur
chainstay housing stop for campy nr rd (my old suntour clamp sits so far away from the axle...)
i have some stuff you might very much like.
email is good.
campy nr type 3-window clamp-on front derailleur
chainstay housing stop for campy nr rd (my old suntour clamp sits so far away from the axle...)
i have some stuff you might very much like.
email is good.
#8466
Unimatrix Zero
Join Date: Sep 2009
Posts: 908
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I would like to trade my 9 speed Veloce RD and FD for a set of 8-sp derailers, preferably Athena but other models considered.
If you only have an RD that is ok too. Will trade for other things as well, just ask. Email or PM please.
Edit: found what I needed.
If you only have an RD that is ok too. Will trade for other things as well, just ask. Email or PM please.
Edit: found what I needed.
Last edited by whatwolf; 05-12-12 at 02:35 PM.
#8467
Senior Member
Join Date: Jun 2011
Location: Brookline MA
Posts: 434
Bikes: 1983 Trek 600, 1973 Mercian
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Have: 10speed Veloce Ergos in pretty good shape (only have used with Shimergo but worked well in that setting); 130mm Ritchey Force quill stem in nice condition, Shimano 600 FD-6400 clamp-on front derailer, Shimano 600 6400 single pivot brakeset (recessed).
Want: decent vintage 700c clincher wheelset (126mm rear spacing prefered); preferably of late 80's- early 90's time scale. European preferred for this build but Shimano/Suntour could also work. Also looking for braze on FD.
Want: decent vintage 700c clincher wheelset (126mm rear spacing prefered); preferably of late 80's- early 90's time scale. European preferred for this build but Shimano/Suntour could also work. Also looking for braze on FD.
Last edited by Orrery; 05-06-12 at 07:55 PM.
#8468
Senior Member
Want campy seatpost bolt
have nuovo record crank bolts
have nuovo record crank bolts
__________________
Semper fi
Semper fi
#8469
Senior Member
ISO: Suntour or like compatible 7 speed thumbshifter, both or i will settle for just the right side.
Have: heaps and heaps. Ask and i will do some checking. I literally have a treasure trove of useful and useless items. Ask and i can do some checking. thanks
Walter
Have: heaps and heaps. Ask and i will do some checking. I literally have a treasure trove of useful and useless items. Ask and i can do some checking. thanks
Walter
#8470
Full Member
Join Date: May 2010
Location: mke
Posts: 256
Bikes: Some old steel, some new steel
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 40 Post(s)
Likes: 0
Liked 6 Times
in
5 Posts
ISO: 7-speed freewheel, preferably Suntour. Something around 13-22 or 13-23. I'm not man enough for my 13-19.
No longer. Disregard.
No longer. Disregard.
Last edited by arimajol; 05-07-12 at 08:01 PM.
#8472
Senior Member
ISO Campagnolo Super Record 26.8mm seat post!!!
Campagnolo Super Record front dérailleur with clamp on type mount
Have all kinds of things, PM me
Campagnolo Super Record front dérailleur with clamp on type mount
Have all kinds of things, PM me
Last edited by shnibop; 05-07-12 at 12:28 AM.
#8473
Senior Member
Regarding the suntour shifter...
I have a friction on it now. It's my wife's bike, she can't master the shift. She's frequently riding on top of the gears, not quite clicking in solid. I am hoping that with a SIS, it will fix the issue.
I have a friction on it now. It's my wife's bike, she can't master the shift. She's frequently riding on top of the gears, not quite clicking in solid. I am hoping that with a SIS, it will fix the issue.
#8474
Senior Member
Join Date: Jul 2011
Location: Huntington beach
Posts: 374
Bikes: Fondriest, 86 Team Fuji
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
ISO -
Nice 26.0/22.2 quill stem 70 to 100mm - Cinelli, ITM, 3TTT, Modolo...
7 or 8 speed Freewheel, not Cassette
Shimano ultegra bar end shifters
Toe cages and straps for KKT Top run
700c wheelset
1984+ Peugeot frame 54-56cm
Saddle
Have -
Mavic Helium wheelset
Sram PG950 9 speed Cassette
Weinmann Vainqueur 999 brakeset
KHS Flite 500 frame
Brand new 172.5mm Campagnolo Centaur crankset w/ new chainrings
Nitto Olympiade 115 39cm drop bars, 25.4
Suntour braze on downtube shifters
60's J.Moyne 4 speed freewheel
& Tons more
Please PM, Thank you.
Nice 26.0/22.2 quill stem 70 to 100mm - Cinelli, ITM, 3TTT, Modolo...
7 or 8 speed Freewheel, not Cassette
Shimano ultegra bar end shifters
Toe cages and straps for KKT Top run
700c wheelset
1984+ Peugeot frame 54-56cm
Saddle
Have -
Mavic Helium wheelset
Sram PG950 9 speed Cassette
Weinmann Vainqueur 999 brakeset
KHS Flite 500 frame
Brand new 172.5mm Campagnolo Centaur crankset w/ new chainrings
Nitto Olympiade 115 39cm drop bars, 25.4
Suntour braze on downtube shifters
60's J.Moyne 4 speed freewheel
& Tons more
Please PM, Thank you.