Found a Huffy 314
#1
Newbie
Thread Starter
Join Date: Nov 2021
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Found a Huffy 314
Hi I buy and resell things for a living i bought a storage unit with a few bikes in it I found this one a huffy 314 with a little rust and the tires were bad so I got them fixed and I was seeing what the value of it Is everything works now I just don't know alot about bikes just how to ride them I know I was told it was a men's bike im just needing help finding its value thanks
#2
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,527
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 4357 Post(s)
Liked 3,995 Times
in
2,666 Posts
Probably $5-15 it is a Huffy nothing special. It might be worth a bit more in scrap?
#3
Senior Member
Join Date: Sep 2005
Location: In the foothills of Los Angeles County
Posts: 25,299
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 8285 Post(s)
Liked 9,053 Times
in
4,479 Posts
Unless it's one of these.
Likes For big john:
#4
Senior Member
Join Date: Jul 2013
Location: Nor-Cal
Posts: 3,767
Bikes: lots
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1958 Post(s)
Liked 2,932 Times
in
1,489 Posts
OP, your Huffy is as close to worthless as a bicycle can be.
#5
Administrator
Join Date: Feb 2005
Location: Delaware shore
Posts: 13,558
Bikes: Cervelo C5, Guru Photon, Waterford, Specialized CX
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1106 Post(s)
Liked 2,180 Times
in
1,470 Posts
Thread moved from Road
#6
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 14,271
Mentioned: 415 Post(s)
Tagged: 1 Thread(s)
Quoted: 3814 Post(s)
Liked 3,345 Times
in
2,182 Posts
-----
if the serial commences with the letters HC it was produced in the company's Celina Ohio plant
if the serial commences with the letters HL is was produced in the company's Lawrenceville Kansas facility
-----
if the serial commences with the letters HC it was produced in the company's Celina Ohio plant
if the serial commences with the letters HL is was produced in the company's Lawrenceville Kansas facility
-----
#8
Thrifty Bill
Join Date: Jan 2008
Location: Mountains of Western NC
Posts: 23,526
Bikes: 86 Katakura Silk, 87 Prologue X2, 88 Cimarron LE, 1975 Sekai 4000 Professional, 73 Paramount, plus more
Mentioned: 96 Post(s)
Tagged: 0 Thread(s)
Quoted: 1236 Post(s)
Liked 964 Times
in
628 Posts
As an ardent picker myself, its best to stick with your circle of competence. Expanding that circle is always a good idea, but it starts with picking a new category, learning, and THEN buying.
I have taken a flyer now and then, buying outside my competence. About 3/4 of those buys were duds (mistakes)! I just keep my spending on flyers under control, so I don't spend a lot on flyers. I think taking measured risks is part of being a successful picker. And the 1/4 that have worked out have had excellent returns, enough to more than cover the mistakes.
I figure if I am not overall making money on my flyers, I need to back off (buy less). Its a balancing act.
My best bike pickups in the last couple of years all have one trait in common, they were not cheap. The $300 to $400 pickups have resulted in great returns, typically 2X to 3X. I never spend that kind of money on flyers. I only do it when I am sure the value is there. I still buy some of the cheaper bikes, solely for parts. Knowledge of parts is key, as most vintage parts have low value, but some are home runs.
If you paid retail for those tires, you are likely upside down on this one.
The Huffy 314s I've seen were dogs. One piece crankset, stamped drop outs, heavy, etc.
Picking bicycles is similar to picking golf clubs. For every one with value, there are 100 or more with little to no value.
I have taken a flyer now and then, buying outside my competence. About 3/4 of those buys were duds (mistakes)! I just keep my spending on flyers under control, so I don't spend a lot on flyers. I think taking measured risks is part of being a successful picker. And the 1/4 that have worked out have had excellent returns, enough to more than cover the mistakes.
I figure if I am not overall making money on my flyers, I need to back off (buy less). Its a balancing act.
My best bike pickups in the last couple of years all have one trait in common, they were not cheap. The $300 to $400 pickups have resulted in great returns, typically 2X to 3X. I never spend that kind of money on flyers. I only do it when I am sure the value is there. I still buy some of the cheaper bikes, solely for parts. Knowledge of parts is key, as most vintage parts have low value, but some are home runs.
If you paid retail for those tires, you are likely upside down on this one.
The Huffy 314s I've seen were dogs. One piece crankset, stamped drop outs, heavy, etc.
Picking bicycles is similar to picking golf clubs. For every one with value, there are 100 or more with little to no value.
Last edited by wrk101; 12-01-21 at 11:45 AM.
Likes For wrk101:
#9
Newbie
As others have stated, not much profit coming to you from that bike but someone out there would probably ride it if it's in decent shape (not sure what condition it was stored in). If you're in a city throw it on craigslist for $40, maybe a college kid picks it up to tool around campus or something like that.
Although the bike looks fairly classic, realistically it is low quality and heavy, nothing really desirable about it collectibly and utility is no better than any other cheap bike. This is probably the nicest Huffy 314 on the internet: Hugh`s bicycle blog: Huffy 10 speed Finished In that condition it might bring $100...
Although the bike looks fairly classic, realistically it is low quality and heavy, nothing really desirable about it collectibly and utility is no better than any other cheap bike. This is probably the nicest Huffy 314 on the internet: Hugh`s bicycle blog: Huffy 10 speed Finished In that condition it might bring $100...