bike science: more than 1 way to turn a bike?
#176
Senior Member
What's being discussed here requires a base level of competence. It's a talking about a refinement of a skill people (who can ride) already have.
No one here is suggesting to start people without skill to start with this discussion.
(People don't learn carving the first time they are on skis either.)
No one here is suggesting to start people without skill to start with this discussion.
(People don't learn carving the first time they are on skis either.)
Your obtusity has been duly noted and recorded in the proper file for future reference.
#177
Senior Member
Join Date: Sep 2007
Location: Far beyond the pale horizon.
Posts: 14,278
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 4260 Post(s)
Liked 1,363 Times
in
945 Posts
Teaching this to the person you referred to as a "menace" (due to a lack of skill) is the wrong thing to do.
Last edited by njkayaker; 05-21-21 at 04:34 PM.
#178
Tortoise Wins by a Hare!
Join Date: Feb 2006
Location: Looney Tunes, IL
Posts: 7,398
Bikes: Wabi Special FG, Raleigh Roper, Nashbar AL-1, Miyata One Hundred, '70 Schwinn Lemonator and More!!
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 1549 Post(s)
Liked 941 Times
in
504 Posts
When you are riding, the bike is always “falling” (leaning) to one side or the other. This is why even when riding in a straight line, you must constantly make minute corrections with the bars to maintain balance. The fact that it is not possible to ride a bike with a locked fork more than a few feet is proof of this.
Every time you "made a turn without counter steering!" what you actually did was ignored making one of those regular, minor steering corrections required every second to maintain balance, allowing the bike to fall to the side required to set up your turn. And yes this is all done unconsciously so we don't even realize it. It gets the bike to the same place a counter steer would get it but not nearly as quickly. In order to quickly change direction or avoid a hazard, you must counter steer by forcing the bars (briefly) in the opposite direction you want to turn. Even this, as dramatic as it can be, becomes so automatic that many don't realize they are doing it. It certainly makes for great BF threads though!
Now to go back and catch up. You all really posted this thread up today!
Every time you "made a turn without counter steering!" what you actually did was ignored making one of those regular, minor steering corrections required every second to maintain balance, allowing the bike to fall to the side required to set up your turn. And yes this is all done unconsciously so we don't even realize it. It gets the bike to the same place a counter steer would get it but not nearly as quickly. In order to quickly change direction or avoid a hazard, you must counter steer by forcing the bars (briefly) in the opposite direction you want to turn. Even this, as dramatic as it can be, becomes so automatic that many don't realize they are doing it. It certainly makes for great BF threads though!
Now to go back and catch up. You all really posted this thread up today!
#179
Tortoise Wins by a Hare!
Join Date: Feb 2006
Location: Looney Tunes, IL
Posts: 7,398
Bikes: Wabi Special FG, Raleigh Roper, Nashbar AL-1, Miyata One Hundred, '70 Schwinn Lemonator and More!!
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 1549 Post(s)
Liked 941 Times
in
504 Posts
Not suggesting, stating as fact. You were not using the handlebars to initiate a turn.
You were turning by using your body weight to lean the bike in the direction you wanted to go. The only alternative to countersteering.
Really, people. This stuff isn't that hard to understand.
You were turning by using your body weight to lean the bike in the direction you wanted to go. The only alternative to countersteering.
Really, people. This stuff isn't that hard to understand.
The only alternative to counter steering is to allow the bike to naturally lean the direction needed for your turn by not correcting it back to the upright position. It's the same principal though, just performed in another manner. This is likely the most common way most turns are initiated. That, or a very subtle, almost undetectable amount of counter steer. Watching the bars it looks the same.
Try this. Ride no handed and watch the bars. They naturally rock back and forth as you balance and steer with your body. Every turn you make will be preceded by the bars briefly pointing the opposite direction of the turn. Every time.
Of course for those who already know it all, or better yet "got it" the first time they wobbled down the sidewalk at 4 years old, training isn't likely to improve their skills.
Likes For AlmostTrick:
Likes For SkinGriz:
#181
Senior Member
Thread Starter
Also, I see many others using "swoopy" maneuver technique in straight forward riding as they try to avoid obstacles and that this leads to them crashing. It also leads them to being more concerned in the pack. ...While I use my steer method to easily avoid obstacles and not crash and have zero nervousness in the pack. I compare and contrast and advocate for my method.
I gave 2 examples: a leaned downhill turn where you steer less, and an uphill turn where you keep the power on and lean less, steer more. I find that I can use the steered uphill technique on faster, flatter turns to advantage.
My common scenario is that I'm in the field in a crit and there's a flat 90-deg turn that often has bumps, bad pavement details. The group is going fast, its standard pace, then tends to coast or soft pedal the corner. This increases the accordion effect. So I go to the front to avoid that. But I also change how I corner. I start applying power throughout the corner, stringing out the pack and leaving behind those who just coast and lean. They might even think they are cornering fast. But because of the bumps and roughness and my need for precision in the corner I dont want to be powering AND only leaning to turn. Steering lets me manage the details better and powering lets me go faster. I pressure my hip to the outside of the corner to stand the bike up more. I'm not going harder in the corner than on the straight. I'm just not slowing down. I can ride steady and hurt the field because they're not using my technique. I'm safely saving energy.
I'm not saying anything about countersteer. But nobody is cornering faster. Nobody is using countersteer to leave me behind or make me struggle. I conclude that I have the fastest cornering technique in that common crit situation. (Of course a couple other riders might be on par, if they know the skill. Several of us have totally rolled away from the pack doing this. Also some can compensate coz they're just stronger -- but it keeps them much tamer. This is just one place where I use skill to offset having less power.)
If anyone knows anything about the science involved in faster, safer cornering and obstacle avoidance -- not in theory but in practice -- please share.
Last edited by JeffOYB; 05-22-21 at 09:16 AM.
Likes For JeffOYB:
#182
Senior Member
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,806
Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1944 Post(s)
Liked 2,164 Times
in
1,323 Posts
So the real purpose of this thread was to promote your ability?
John
John
Likes For 70sSanO:
#183
Senior Member
Thread Starter
Stupid. ...Reading comprehension.
I asked what is the science behind this technique.
I suppose I could add because some people say that steering isn't real and doesn't help you corner faster or safer.
I'm trying to figure out a good way to explain the steering way to turn, to help ppl be safer.
I asked what is the science behind this technique.
I suppose I could add because some people say that steering isn't real and doesn't help you corner faster or safer.
I'm trying to figure out a good way to explain the steering way to turn, to help ppl be safer.
#184
Senior Member
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,806
Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1944 Post(s)
Liked 2,164 Times
in
1,323 Posts
#185
climber has-been
Join Date: Dec 2004
Location: Palo Alto, CA
Posts: 7,111
Bikes: Scott Addict R1, Felt Z1
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 3432 Post(s)
Liked 3,567 Times
in
1,793 Posts
As with a bicycle, there are two ways to initiate a carved turn on skis:
Technique #1: lean in the direction you want to turn
Technique #2. move your feet to the opposite direction you want to turn
#1 is analagous to "body steering" on a bicycle. It is lumbering, slow, and not that precise, as you have to shift your body weight from one side to the other.
#2 is analagous to counter steering, as you body weight remains in one place while your feet move to the outside of the turn.
For the same reasons that skillful cyclists use counter steering, skillful skiers use the "move feet under body" technique.
Likes For terrymorse:
#186
Senior Member
Thread Starter
#187
Senior Member
Join Date: Sep 2007
Location: Far beyond the pale horizon.
Posts: 14,278
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 4260 Post(s)
Liked 1,363 Times
in
945 Posts
There's a similar turning issue in alpine skiing.
As with a bicycle, there are two ways to initiate a carved turn on skis:
Technique #1: lean in the direction you want to turn
Technique #2. move your feet to the opposite direction you want to turn
#1 is analagous to "body steering" on a bicycle. It is lumbering, slow, and not that precise, as you have to shift your body weight from one side to the other.
#2 is analagous to counter steering, as you body weight remains in one place while your feet move to the outside of the turn.
For the same reasons that skillful cyclists use counter steering, skillful skiers use the "move feet under body" technique.
Effective slalom skiing
As with a bicycle, there are two ways to initiate a carved turn on skis:
Technique #1: lean in the direction you want to turn
Technique #2. move your feet to the opposite direction you want to turn
#1 is analagous to "body steering" on a bicycle. It is lumbering, slow, and not that precise, as you have to shift your body weight from one side to the other.
#2 is analagous to counter steering, as you body weight remains in one place while your feet move to the outside of the turn.
For the same reasons that skillful cyclists use counter steering, skillful skiers use the "move feet under body" technique.
Effective slalom skiing
Carving technique doesn't entail turning the skis away from the turn. (The momentary pointing the wheel away from the turn is a key thing in countersteering).
A big point of carving technique is to keep body mass moving in a straighter path and reduce twisting mass around a vertical axis and rolling (side to side motion) of that mass (which makes turns slower).
The technique of reducing twisting is called "countering" but it's not the same thing as what's done for "countersteering". It's being done for the same reason people swing their arms when running.
The moving the skis under the body is to tip the skis and bend them along the path of the turn without swinging body mass back-and-forth. (Countersteering is steering away from the path of the turn.)
==============
The idea with (modern) skiing is to bend the edges of the skis with/into the turn you want to move in. Countersteering is different (and weird) because it works against the turn (but just briefly). After the countersteer, you steer into the curve (and that's vaguely like skiing).
One might argue that countersteering to get the lean is "bending the skiis" but the difference between countersteering and skiing in how that's done is important.
Countersteering is doing something different than making bicycle turns by skiing them.
The point of talking about countersteering is to work against the misconception that people ski their bikes in turns.
Last edited by njkayaker; 05-22-21 at 01:05 PM.
#188
Senior Member
Join Date: Sep 2007
Location: Far beyond the pale horizon.
Posts: 14,278
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 4260 Post(s)
Liked 1,363 Times
in
945 Posts
You also picked the wrong forum for your question (this forum tends to be for more-basic questions).
And given the amount of money you are paying people to give you what you demand, whinging about not getting it is an odd look.
I doubt it's because the other riders are riding slack touring bikes (most people are probably riding bikes with similar steering). (Not sure why you think the bikes people are using are significantly different.)
I'd surmise you are "in the middle of the pack" as far as criterium racing skill goes. What do people that are better than you do?
Last edited by njkayaker; 05-22-21 at 01:26 PM.
#189
Senior Member
Thread Starter
You really don't describe things very clearly in your first post.
You also picked the wrong forum for your question (this forum tends to be for more-basic questions).
And given the amount of money you are paying people to give you what you demand, whinging about not getting it is an odd look.
You need more adhesion and speed to lean more. You may be relying on countersteer more than you think you are. And you may be setting up the turn better than others (people might be turning too late).
I doubt it's because the other riders are riding slack touring bikes (most people are probably riding bikes with similar steering). (Not sure why you think the bikes people are using are significantly different.)
I'd surmise you are "in the middle of the pack" as far as criterium racing skill goes. What do people that are better than you do?
You also picked the wrong forum for your question (this forum tends to be for more-basic questions).
And given the amount of money you are paying people to give you what you demand, whinging about not getting it is an odd look.
You need more adhesion and speed to lean more. You may be relying on countersteer more than you think you are. And you may be setting up the turn better than others (people might be turning too late).
I doubt it's because the other riders are riding slack touring bikes (most people are probably riding bikes with similar steering). (Not sure why you think the bikes people are using are significantly different.)
I'd surmise you are "in the middle of the pack" as far as criterium racing skill goes. What do people that are better than you do?
Don't know what this is about different bikes.
It seems I'm higher skill than fitness. And back in fitter days was still higher skill. One of my points was that nobody I race crits with puts hurt on me in flat corners. I'm not fastest in downhill curves coz I don't live near them. So I have a lot of the steer kind of turn skill but not so much of the leaning kind. This also suggests to me there are different ways to turn.
What about fork flop?
also: i asked before but the deluge: does countersteering always have to mean bars pointing the wrong way against the turn across centerline of bike?
what if fork flop wants to turn the bars 2" to the left and you resist that pressure and only let them turn 1". Have you countersteered an inch?
...i recall seeing a comment suggesting this. but due to the swampage i dont know what came of it...
#190
Tragically Ignorant
Join Date: Jun 2018
Location: New England
Posts: 15,613
Bikes: Serotta Atlanta; 1994 Specialized Allez Pro; Giant OCR A1; SOMA Double Cross Disc; 2022 Allez Elite mit der SRAM
Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 8186 Post(s)
Liked 9,098 Times
in
5,054 Posts
Disagree on my first question.
Don't know what this is about different bikes.
It seems I'm higher skill than fitness. And back in fitter days was still higher skill. One of my points was that nobody I race crits with puts hurt on me in flat corners. I'm not fastest in downhill curves coz I don't live near them. So I have a lot of the steer kind of turn skill but not so much of the leaning kind. This also suggests to me there are different ways to turn.
What about fork flop?
also: i asked before but the deluge: does countersteering always have to mean bars pointing the wrong way against the turn across centerline of bike?
what if fork flop wants to turn the bars 2" to the left and you resist that pressure and only let them turn 1". Have you countersteered an inch?
...i recall seeing a comment suggesting this. but due to the swampage i dont know what came of it...
Don't know what this is about different bikes.
It seems I'm higher skill than fitness. And back in fitter days was still higher skill. One of my points was that nobody I race crits with puts hurt on me in flat corners. I'm not fastest in downhill curves coz I don't live near them. So I have a lot of the steer kind of turn skill but not so much of the leaning kind. This also suggests to me there are different ways to turn.
What about fork flop?
also: i asked before but the deluge: does countersteering always have to mean bars pointing the wrong way against the turn across centerline of bike?
what if fork flop wants to turn the bars 2" to the left and you resist that pressure and only let them turn 1". Have you countersteered an inch?
...i recall seeing a comment suggesting this. but due to the swampage i dont know what came of it...
I think you've now clarified that you are posting a bunch of racing forum questions in a General Cycling forum, and I'm shocked, shocked you're not getting the answers you want.
Admit you posted this in the wrong place, and move on. Quit scolding people because you were unclear about what you were looking for.
#191
Senior Member
Thread Starter
I think you've now clarified that you are posting a bunch of racing forum questions in a General Cycling forum, and I'm shocked, shocked you're not getting the answers you want.
Admit you posted this in the wrong place, and move on. Quit scolding people because you were unclear about what you were looking for.
Admit you posted this in the wrong place, and move on. Quit scolding people because you were unclear about what you were looking for.
#192
Tragically Ignorant
Join Date: Jun 2018
Location: New England
Posts: 15,613
Bikes: Serotta Atlanta; 1994 Specialized Allez Pro; Giant OCR A1; SOMA Double Cross Disc; 2022 Allez Elite mit der SRAM
Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 8186 Post(s)
Liked 9,098 Times
in
5,054 Posts
Bad analysis on your part. As I've said a couple times, when people say one way to turn is better than another it's good to know that they know what they are talking about. That's what I stated that my references to racing are meant to do. And my main goal is to help any rider maneuver more safely. ...I've said that also.
Yes, and you obviously were dissatisfied with the general answer that a) everybody countersteers to some extent whether they're aware of it or not and b) relatively tiny advantages in racing are not going to translate into any real safety gains in general riding.
As far as I can tell, you're looking for people who turn like you turn to say everyone should be taught to turn like you turn, and your feelings got hurt because pretty much no one is saying this.
Likes For livedarklions:
#193
Senior Member
Thread Starter
I teach basic fitness rider safety classes. It's not about racing. I'm wondering about the science of the 2 kinds of turns I have them learn. I already know about the practical aspect. I would like to be able to give a better technical explanation.
I have riders do swoopy turns in a parking lot where they lean a lot and use their arms less, keeping them quite straight, and I suggest that kind of turning will help them in faster downhill turns where leaning is the main thing. I also have them do steering turns where they push their hips to the outside of the corner and turn their bars more to get more detail control in their turns -- I mention that this kind of turning can help them avoid potholes in a group or can help them stay up when it's slippery; it can also let them apply power while turning. So I have these beginners practice different kinds of turning that are useful for different things. They like it. They like learning and feeling the differences. These beginners are learning needed skills for riding faster with fitness groups. I have them do this because in packs I constantly see ppl crash because they swoop to avoid a pothole and wash out their front wheel or swerve into another rider.
I also have them learn the difference between riding with straight arms and bent arms. I tell them straight is OK as a rest but that they are far safer when using bent arms. ...And bent arms let them steer.
Today's unsafe bike culture relates to the dominance of straight arm riding and the resulting swoop-turning.
My questions are suitable here because there is no better section for them.
I have riders do swoopy turns in a parking lot where they lean a lot and use their arms less, keeping them quite straight, and I suggest that kind of turning will help them in faster downhill turns where leaning is the main thing. I also have them do steering turns where they push their hips to the outside of the corner and turn their bars more to get more detail control in their turns -- I mention that this kind of turning can help them avoid potholes in a group or can help them stay up when it's slippery; it can also let them apply power while turning. So I have these beginners practice different kinds of turning that are useful for different things. They like it. They like learning and feeling the differences. These beginners are learning needed skills for riding faster with fitness groups. I have them do this because in packs I constantly see ppl crash because they swoop to avoid a pothole and wash out their front wheel or swerve into another rider.
I also have them learn the difference between riding with straight arms and bent arms. I tell them straight is OK as a rest but that they are far safer when using bent arms. ...And bent arms let them steer.
Today's unsafe bike culture relates to the dominance of straight arm riding and the resulting swoop-turning.
My questions are suitable here because there is no better section for them.
#194
Senior Member
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,806
Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1944 Post(s)
Liked 2,164 Times
in
1,323 Posts
The one thing I really love about my road bike is how it “dives” into corners. I realize that term is most likely not correct, but it is the sensation that the bike feels like it is almost on rails and turning itself/falling into the corner.
But in thinking about setting up for that dive, so to speak, around the apex, I can understand how I slightly move opposite the turn, even if I am not aware of it, and then “dive” into the turn.
At the same time when I do this poorly, I feel that I’m carrying too much speed and fighting to make the turn.
I never rode motorcycles so before BF, I’d never heard of countersteering. I had never really given it much thought over the past few years, but I’m going to try to be a bit more cognizant of my mechanics.
John
But in thinking about setting up for that dive, so to speak, around the apex, I can understand how I slightly move opposite the turn, even if I am not aware of it, and then “dive” into the turn.
At the same time when I do this poorly, I feel that I’m carrying too much speed and fighting to make the turn.
I never rode motorcycles so before BF, I’d never heard of countersteering. I had never really given it much thought over the past few years, but I’m going to try to be a bit more cognizant of my mechanics.
John
#195
Senior Member
Thread Starter
Diving into a corner is one way to turn. And seems best to me for obstacle-free, grippy downhill turns.
My points are that:
*Diving is a massively dangerous habit to have when you suddenly see a pothole while you're riding in a group. Nor will diving help you when you hit that pothole and need to make it thru it w/o deviating from straight line. To me diving is swooping is turning by pushing the bars down, tilting the bike down.
*Also diving won't help you go around a flat or uphill turn very fast.
...When I do twisty turns around pylons in a parking lot I can do them by powering into them fast then dramatically tilting the bike toward the ground for each swoopy turn, tipping the bike down, from one side to the other, while not turning the bars much. Or... I can use my hips to keep the bike more upright and pedal thru the turns around the pylons and turn my bars more.
Both ways work but they work best in different conditions.
The steering way works best in a group for avoiding potholes. The diving, swoopy way can be done using straight stiff arms which is bad for fine detail control.
My points are that:
*Diving is a massively dangerous habit to have when you suddenly see a pothole while you're riding in a group. Nor will diving help you when you hit that pothole and need to make it thru it w/o deviating from straight line. To me diving is swooping is turning by pushing the bars down, tilting the bike down.
*Also diving won't help you go around a flat or uphill turn very fast.
...When I do twisty turns around pylons in a parking lot I can do them by powering into them fast then dramatically tilting the bike toward the ground for each swoopy turn, tipping the bike down, from one side to the other, while not turning the bars much. Or... I can use my hips to keep the bike more upright and pedal thru the turns around the pylons and turn my bars more.
Both ways work but they work best in different conditions.
The steering way works best in a group for avoiding potholes. The diving, swoopy way can be done using straight stiff arms which is bad for fine detail control.
#196
Tragically Ignorant
Join Date: Jun 2018
Location: New England
Posts: 15,613
Bikes: Serotta Atlanta; 1994 Specialized Allez Pro; Giant OCR A1; SOMA Double Cross Disc; 2022 Allez Elite mit der SRAM
Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 8186 Post(s)
Liked 9,098 Times
in
5,054 Posts
I have no idea what "Today's unsafe bike culture" is supposed to refer to. All I know is your concerns seem to have nothing to do with the riding I do, maybe it applies to group riding, but I'm just not seeing people go down by taking too wide turns or even having close calls for that reason.
But you seem to be in need of physics teachers to answer your "how do I explain" and "what is the science" questions.
#197
Senior Member
Join Date: Jan 2010
Posts: 39,244
Mentioned: 211 Post(s)
Tagged: 1 Thread(s)
Quoted: 18420 Post(s)
Liked 15,564 Times
in
7,333 Posts
I’m about to run some errands on my bike. Not sure how to turn after reading this thread. Wish me suerte.
#198
Banned
Join Date: Feb 2008
Location: Mississauga/Toronto, Ontario canada
Posts: 8,721
Bikes: I have 3 singlespeed/fixed gear bikes
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 4227 Post(s)
Liked 2,488 Times
in
1,286 Posts
I've been cycling in all types of terrain and weather conditions including ice and snow for the past 14 years...After reading this thread I've decided to give up cycling for good because steering is just too damn complicated.
#199
Banned
Join Date: Feb 2008
Location: Mississauga/Toronto, Ontario canada
Posts: 8,721
Bikes: I have 3 singlespeed/fixed gear bikes
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 4227 Post(s)
Liked 2,488 Times
in
1,286 Posts
#200
Senior Member
Thread Starter
I have no idea what "Today's unsafe bike culture" is supposed to refer to. All I know is your concerns seem to have nothing to do with the riding I do, maybe it applies to group riding, but I'm just not seeing people go down by taking too wide turns or even having close calls for that reason.
But you seem to be in need of physics teachers to answer your "how do I explain" and "what is the science" questions.
But you seem to be in need of physics teachers to answer your "how do I explain" and "what is the science" questions.
I never mentioned wide or tight turns.
Silly about teachers. But it would be helpful if an experienced biker who knew physics could explain the differences I'm seeing in turning.