Go Back  Bike Forums > Bike Forums > General Cycling Discussion
Reload this Page >

Drying a bike by machine

Search
Notices
General Cycling Discussion Have a cycling related question or comment that doesn't fit in one of the other specialty forums? Drop on in and post in here! When possible, please select the forum above that most fits your post!

Drying a bike by machine

Thread Tools
 
Search this Thread
 
Old 04-08-23, 03:37 PM
  #1  
fredlord
Full Member
Thread Starter
 
Join Date: Apr 2021
Posts: 226
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 144 Post(s)
Liked 119 Times in 70 Posts
Drying a bike by machine

I tried drying a bike with an ancient data-vac (electric handheld machine for blowing dust out oof computers). It did the job quickly and thoroughly, then died.

Now I’m in the market for a new drying machine. It will only be used for drying bikes. Small and cheap would be good. Portable (i.e. fit in a backpack) would be even better. Having to be plugged-in is fine.

Any recommendations? I'm in Sydney but will order overseas if necessary.

Cheers.
fredlord is offline  
Old 04-08-23, 04:04 PM
  #2  
terrymorse 
climber has-been
 
terrymorse's Avatar
 
Join Date: Dec 2004
Location: Palo Alto, CA
Posts: 7,111

Bikes: Scott Addict R1, Felt Z1

Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 3432 Post(s)
Liked 3,567 Times in 1,793 Posts
An electric leaf blower ought to do the trick. I see those in use at the local car wash, before they do their final wipe down.

And who knows? Maybe you'll find a leaf that needs blowing.
__________________
Ride, Rest, Repeat. ROUVY: terrymorse


terrymorse is offline  
Likes For terrymorse:
Old 04-08-23, 04:09 PM
  #3  
fredlord
Full Member
Thread Starter
 
Join Date: Apr 2021
Posts: 226
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 144 Post(s)
Liked 119 Times in 70 Posts
Originally Posted by terrymorse
An electric leaf blower ought to do the trick. I see those in use at the local car wash, before they do their final wipe down.

And who knows? Maybe you'll find a leaf that needs blowing.
Thanks, that didn't even cross my mind. Probably because I hate those things.
fredlord is offline  
Likes For fredlord:
Old 04-08-23, 07:09 PM
  #4  
rsbob 
Grupetto Bob
 
rsbob's Avatar
 
Join Date: Sep 2020
Location: Seattle-ish
Posts: 6,222

Bikes: Bikey McBike Face

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 2584 Post(s)
Liked 5,642 Times in 2,922 Posts
No suggestion for you Lord Fred, but an interesting observation the other day after I cleaned my chain using a chain pig and Parks chain cleaner. Usually I wipe the chain as thoroughly as one can with rags. This time I used compressed air to get the remaining cleaner and rinse water out of the chain and was shocked to see how much liquid the chain was still holding as well as hidden black residue. I will be using the compressor in the future after cleaning and rinsing.

Fred you may want to check Amazon for mini-blowers. Here’s a page full of them: https://www.amazon.com/s?k=mini+air+..._ts-doa-p_1_16
__________________
Road 🚴🏾‍♂️ & Mountain 🚵🏾‍♂️







rsbob is offline  
Likes For rsbob:
Old 04-08-23, 07:15 PM
  #5  
indyfabz
Senior Member
 
indyfabz's Avatar
 
Join Date: Jan 2010
Posts: 39,243
Mentioned: 211 Post(s)
Tagged: 1 Thread(s)
Quoted: 18419 Post(s)
Liked 15,560 Times in 7,332 Posts
Something wrong with a blow dryer from somewhere like CVS?
indyfabz is offline  
Likes For indyfabz:
Old 04-08-23, 08:07 PM
  #6  
tempocyclist
Senior Member
 
tempocyclist's Avatar
 
Join Date: Jun 2021
Location: Australia
Posts: 824

Bikes: 2002 Trek 5200 (US POSTAL), 2020 Canyon Aeroad SL

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 313 Post(s)
Liked 682 Times in 328 Posts
A basic multi-speed hairdryer should do the trick I would think.
tempocyclist is offline  
Likes For tempocyclist:
Old 04-08-23, 08:30 PM
  #7  
Koyote
Senior Member
 
Join Date: Sep 2017
Posts: 7,886
Mentioned: 38 Post(s)
Tagged: 0 Thread(s)
Quoted: 6969 Post(s)
Liked 10,966 Times in 4,691 Posts
Wipe it off with a clean soft towel and let it sit. Using forced air to dry a bike will potentially force moisture into places it should not go.
Koyote is online now  
Likes For Koyote:
Old 04-08-23, 08:32 PM
  #8  
fredlord
Full Member
Thread Starter
 
Join Date: Apr 2021
Posts: 226
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 144 Post(s)
Liked 119 Times in 70 Posts
Originally Posted by indyfabz
Something wrong with a blow dryer from somewhere like CVS?


Originally Posted by tempocyclist
A basic multi-speed hairdryer should do the trick I would think.
​​​​​​​

Thanks for the suggestions, but I know absolutely nothing about hairdryers. Don't they blow hot? Wouldn't that be bad for the bike?
fredlord is offline  
Old 04-09-23, 01:09 AM
  #9  
tempocyclist
Senior Member
 
tempocyclist's Avatar
 
Join Date: Jun 2021
Location: Australia
Posts: 824

Bikes: 2002 Trek 5200 (US POSTAL), 2020 Canyon Aeroad SL

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 313 Post(s)
Liked 682 Times in 328 Posts
Yes they blow hot, and that could be an issue with frame stickers and whatnot. Some hairdryers have a "cool" setting I'm pretty sure, which would be better.
tempocyclist is offline  
Old 04-09-23, 02:44 AM
  #10  
fredlord
Full Member
Thread Starter
 
Join Date: Apr 2021
Posts: 226
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 144 Post(s)
Liked 119 Times in 70 Posts
Originally Posted by Koyote
Wipe it off with a clean soft towel and let it sit. Using forced air to dry a bike will potentially force moisture into places it should not go.
That's a pity because that "let it sit" thing really messes with my life organisation.
fredlord is offline  
Old 04-09-23, 04:39 AM
  #11  
Chuck M 
Happy With My Bikes
 
Chuck M's Avatar
 
Join Date: Sep 2020
Location: Oklahoma
Posts: 2,187

Bikes: Hi-Ten bike boomers, a Trek Domane and some projects

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 884 Post(s)
Liked 2,307 Times in 1,117 Posts
My first thought was a small shop vac used in blower mode. But I like the leaf blower idea more. The leaf blowers can be had in cordless styles which would probably be more convenient.
__________________
"It is the unknown around the corner that turns my wheels." -- Heinz Stücke

Chuck M is online now  
Old 04-09-23, 05:43 AM
  #12  
dedhed
SE Wis
 
dedhed's Avatar
 
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,515

Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970

Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2747 Post(s)
Liked 3,398 Times in 2,057 Posts
Originally Posted by fredlord

Thanks for the suggestions, but I know absolutely nothing about hairdryers. Don't they blow hot? Wouldn't that be bad for the bike?
A bike should be able to handle temperatures your head does.

​​​​​​https://www.amazon.com/Conair-Mid-Si...843142255&th=1
dedhed is offline  
Likes For dedhed:
Old 04-09-23, 05:55 AM
  #13  
indyfabz
Senior Member
 
indyfabz's Avatar
 
Join Date: Jan 2010
Posts: 39,243
Mentioned: 211 Post(s)
Tagged: 1 Thread(s)
Quoted: 18419 Post(s)
Liked 15,560 Times in 7,332 Posts
Your lungs? Free, cordless and no power required.
indyfabz is offline  
Likes For indyfabz:
Old 04-09-23, 06:19 AM
  #14  
staehpj1
Senior Member
 
staehpj1's Avatar
 
Join Date: Aug 2006
Location: Tallahassee, FL
Posts: 11,868
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1251 Post(s)
Liked 755 Times in 561 Posts
Bounce it on the tires a few times? That shakes off a lot of the major drops. I use WD40 to displace water from some parts like the retention portion of spd pedals. It leaves some minimal lubrication and doesn't leave anything that dirt clings to.

I have used a not too powerful battery leaf blower at times, but usually just a few bounces and some Florida sun.
staehpj1 is offline  
Old 04-09-23, 07:50 AM
  #15  
phughes
Senior Member
 
phughes's Avatar
 
Join Date: Mar 2011
Posts: 3,094
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1034 Post(s)
Liked 1,290 Times in 743 Posts
Originally Posted by dedhed
A bike should be able to handle temperatures your head does.

​​​​​​https://www.amazon.com/Conair-Mid-Si...843142255&th=1
Says the guy named dedhead.
phughes is offline  
Old 04-09-23, 05:22 PM
  #16  
Pratt
Senior Member
 
Join Date: Aug 2019
Posts: 1,114
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 415 Post(s)
Liked 498 Times in 295 Posts
Won't fit in the dryer at the laundromat?
Pratt is offline  
Likes For Pratt:
Old 04-09-23, 05:32 PM
  #17  
indyfabz
Senior Member
 
indyfabz's Avatar
 
Join Date: Jan 2010
Posts: 39,243
Mentioned: 211 Post(s)
Tagged: 1 Thread(s)
Quoted: 18419 Post(s)
Liked 15,560 Times in 7,332 Posts
Originally Posted by Pratt
Won't fit in the dryer at the laundromat?
Easier to just hang it up with the towel after showering with the bike. No quarters necessary.
indyfabz is offline  
Old 04-09-23, 05:33 PM
  #18  
Troul 
Senior Member
 
Troul's Avatar
 
Join Date: Oct 2013
Location: Mich
Posts: 7,391

Bikes: RSO E-tire dropper fixie brifter

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 2,974 Times in 1,919 Posts
Originally Posted by Pratt
Won't fit in the dryer at the laundromat?
depends on how aero the bicycle is?
__________________
-Oh Hey!
Troul is offline  
Likes For Troul:
Old 04-09-23, 06:20 PM
  #19  
wolfchild
Banned
 
Join Date: Feb 2008
Location: Mississauga/Toronto, Ontario canada
Posts: 8,721

Bikes: I have 3 singlespeed/fixed gear bikes

Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 4227 Post(s)
Liked 2,488 Times in 1,286 Posts
Why speed up the drying ?....Why can't you just leave the bike alone and let it dry naturally on its own?.
wolfchild is offline  
Old 04-09-23, 07:07 PM
  #20  
terrymorse 
climber has-been
 
terrymorse's Avatar
 
Join Date: Dec 2004
Location: Palo Alto, CA
Posts: 7,111

Bikes: Scott Addict R1, Felt Z1

Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 3432 Post(s)
Liked 3,567 Times in 1,793 Posts
Originally Posted by wolfchild
Why speed up the drying ?....Why can't you just leave the bike alone and let it dry naturally on its own?.
Water spots?
Surface rust on the drivetrain?
__________________
Ride, Rest, Repeat. ROUVY: terrymorse


terrymorse is offline  
Old 04-09-23, 07:12 PM
  #21  
fooferdoggie 
Senior Member
 
Join Date: Jan 2020
Posts: 2,352
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 680 Post(s)
Liked 949 Times in 556 Posts
Originally Posted by terrymorse
Water spots?
Surface rust on the drivetrain?
yes my shop in winter has no heat and if it is 99% humidity and raining for weeks on in my bike never dries. I use an electric leaf blower (because I have one) to blow the water off the chain so it wont rust. fast and easy.
fooferdoggie is offline  
Old 04-09-23, 07:20 PM
  #22  
zandoval 
Senior Member
 
zandoval's Avatar
 
Join Date: May 2010
Location: Bastrop Texas
Posts: 4,479

Bikes: Univega, Peu P6, Peu PR-10, Ted Williams, Peu UO-8, Peu UO-18 Mixte, Peu Dolomites

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 966 Post(s)
Liked 1,629 Times in 1,045 Posts
Over the past years I have come to use my leaf blower. I wash my bikes with laundry soap and water using a soft brush. I then blow off the water and then spray the entire bike with ArmourAll tire foam. I spray everything. Seat, brakes, tires, spokes, hubs, bars... everything. I then hit it with the leaf blower again then wipe the entire bike down with a soft cloth. The emollients in the tire foam leave a nice shinny layer of protection over the paint, metal and rubber/plastic components as well a low level lubrication.

I would probably do things much differently if I was doing dirty mountain biking and bringing home a crusty bike...
__________________
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
zandoval is offline  
Old 04-09-23, 07:21 PM
  #23  
JohnDThompson 
Old fart
 
JohnDThompson's Avatar
 
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,786

Bikes: Several, mostly not name brands.

Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3588 Post(s)
Liked 3,400 Times in 1,934 Posts
Originally Posted by fredlord
Thanks for the suggestions, but I know absolutely nothing about hairdryers. Don't they blow hot? Wouldn't that be bad for the bike?
Keep the blower moving, so no spot can get overheated.
JohnDThompson is offline  
Old 04-09-23, 07:26 PM
  #24  
CrimsonEclipse
Senior Member
 
Join Date: Dec 2004
Posts: 1,098
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 559 Post(s)
Liked 647 Times in 381 Posts
Jet engine...

Or, if it's a folding bike:
coin laundry
CrimsonEclipse is offline  
Old 04-10-23, 11:49 AM
  #25  
genejockey 
Klaatu..Verata..Necktie?
 
genejockey's Avatar
 
Join Date: May 2007
Location: SF Bay Area
Posts: 17,971

Bikes: Litespeed Ultimate, Ultegra; Canyon Endurace, 105; Battaglin MAX, Chorus; Bianchi 928 Veloce; Ritchey Road Logic, Dura Ace; Cannondale R500 RX100; Schwinn Circuit, Sante; Lotus Supreme, Dura Ace

Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 10428 Post(s)
Liked 11,901 Times in 6,096 Posts
Originally Posted by wolfchild
Why speed up the drying ?....Why can't you just leave the bike alone and let it dry naturally on its own?.
That works when it's warm, and dry enough outside, or even inside where the bike(s) are kept, but this winter it was always wet outside, and my bikes are kept in an unheated garage, and of course needed to be washed more frequently because they were ridden in the wet. So I would close run a space heater to warm up the garage and a box fan to circulate the air.
__________________
"Don't take life so serious-it ain't nohow permanent."

"Everybody's gotta be somewhere." - Eccles
genejockey is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.