Dork disc source for 46t cassette?
#1
Senior Member
Thread Starter
Join Date: Jun 2012
Location: harrisburg, pennsylvania
Posts: 351
Bikes: 1976 Schwinn Super Le Tour, tricked out with modern components. Shimano Alfine 11 internal gear hub. Dynamo hub. Titanium racks and bottle cages. Mercier Kilo Wide Tire dropbar singlespeed
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 44 Post(s)
Liked 8 Times
in
1 Post
Dork disc source for 46t cassette?
Call me a dork, but I like the protection of a dork disc when self supported bicycle camping in the middle of nowhere. I'd rather not have to use my hypercracker to remove the cassette in the dark in a rainstorm in the cold to change spokes chewed up from the rare chance that the limit screw is out of adjustment and the chain jams behind the cassette. But where to find a dork disc for my planned 1x46 setup? I can't seem to find a source for a 46t size dork disc. What about a ghetto hack like zip ties on the spokes just behind the cassette, carefully trimmed? Just something to prevent a jam. Looks and image don't matter to me. I tour alone and have no shame. Source for a big disc or diy hack?
Likes For AnkleWork:
#4
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,949
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Mentioned: 117 Post(s)
Tagged: 0 Thread(s)
Quoted: 1303 Post(s)
Liked 1,911 Times
in
1,141 Posts
We used to call them- pie pans. you might look for one of those. Smiles, MH
#5
Senior Member
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,319
Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1438 Post(s)
Liked 1,092 Times
in
723 Posts
I would get a spoke protector for a 32-spoke wheel, which should have 4 prongs (36 have 3), then cut off two, use the remaining ones to center it and drill or melt holes to wire or zip tie it securely in place. https://www.amazon.com/Shimano-Freeh.../dp/B001D2VBQ6 I'd still have the Hypercracker and extra spokes handy.
#6
Really Old Senior Member
Buy a pie tin and trim off the outside down to what you need with a tin snips.
#7
Senior Member
Thread Starter
Join Date: Jun 2012
Location: harrisburg, pennsylvania
Posts: 351
Bikes: 1976 Schwinn Super Le Tour, tricked out with modern components. Shimano Alfine 11 internal gear hub. Dynamo hub. Titanium racks and bottle cages. Mercier Kilo Wide Tire dropbar singlespeed
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 44 Post(s)
Liked 8 Times
in
1 Post
Cassette diameter 8.26 inches. Would 7.25 disc at least prevent chain jamming?
The biggest disc I can find is 7.25 inches diameter and my cassette diameter is 8.26 inches (gigantic 46 tooth for a 1x setup). I don't need the disc to be a larger diameter than the cassette, since I'm not worried about the derailleur jamming into the spokes. I just want to protect against a derailleur misadjustment throwing the chain off the cassette and jamming between the cassette and spokes. Seems like an undersized dork disc would at least prevent the chain from jamming the whole way down behind the cassette where the spokes angle out at the hub. Is my thought that a too small diameter dork disc would at least prevent that type of jam and spoke damage?
#8
Non omnino gravis
Yeah, you really only need a disc large enough to stop the chain from falling into a gap narrower than the chain. From a quick glance, the disc would only need to be maybe 4" across.
As a guy who has dropped his chain behind the cassette once or twice (my own fault) now I feel like I might need to fabricate something.
As a guy who has dropped his chain behind the cassette once or twice (my own fault) now I feel like I might need to fabricate something.
#12
Senior Member
Join Date: Jan 2004
Location: Madison, WI USA
Posts: 6,154
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 2363 Post(s)
Liked 1,749 Times
in
1,191 Posts
#13
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,515
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2747 Post(s)
Liked 3,396 Times
in
2,056 Posts
#14
Junior Member
Join Date: Jan 2012
Location: Parma, Ohio
Posts: 147
Bikes: Trek 4300, '84 Trek 400,'88 Trek, 85 Trek 720 560, 82 Motobecane Randonee, 75 Schwinn Collegiate, Schwinn Sierra, '84 Trek 890, 2001 Trek 5200 OCLV USPS, 99 Trek Y Foil
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 14 Times
in
10 Posts
I have an old Schwinn Collegiate with a big ol 9" chrome one! It is for a freewheel, but maybe you could figure out some good hack to make it work. I think the Varsity used them too. There has to be some on ebay, they made millions of them.
Last edited by Vefer; 02-02-20 at 08:34 PM.
#15
Senior Member
Some bike shops save them, you can ask a few to see if they have any on hand. I grabbed a big stash when a local shop closed, they were going to toss them. I think the largest I have fits a 40T though.
#16
Senior Member
Join Date: Sep 2013
Location: Massachusetts
Posts: 4,530
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 2112 Post(s)
Liked 663 Times
in
443 Posts
This. 1/2 a stop away from the low. So what's the next cog below your 46t?
(And same on the high side, there are no dork disks on that side, so you probably will be losing the 11 or 12. Yes, you've "burned" two cogs, but, in the "middle of nowhere" this might be sane.)
Ideally, you'll want the 1/2 stop noise to tell you not to do that. Assuming that since you are in the "middle of nowhere" you have brought inner shift cable too.
-mr. bill
(And same on the high side, there are no dork disks on that side, so you probably will be losing the 11 or 12. Yes, you've "burned" two cogs, but, in the "middle of nowhere" this might be sane.)
Ideally, you'll want the 1/2 stop noise to tell you not to do that. Assuming that since you are in the "middle of nowhere" you have brought inner shift cable too.
-mr. bill