aluminum pipes as handlebars
12-12-09, 10:58 PM
#1
Senior Member
Thread Starter
Join Date: Aug 2008
Posts: 151
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
aluminum pipes as handlebars
handle bars are expensive.
I was thinking of just going to home depot and picking up an aluminum pipe, cut it down and mount it.
I do ride up hill as I pull on my handlebars...the one I have now.
bad or good, anybody have experience?
I was thinking of just going to home depot and picking up an aluminum pipe, cut it down and mount it.
I do ride up hill as I pull on my handlebars...the one I have now.
bad or good, anybody have experience?
12-12-09, 11:05 PM
#2
...if you say so...
Join Date: Jan 2006
Location: Portland, Oregon
Posts: 16
Bikes: Litespeed Firenze (2004) , Kona Honky 2009 (lovely rain bike), Soma DC for the commute, ancient but intact Cannondale Criterium (1987), Bianchi Grizly Mtn
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I wish you a memorable Festivus.
12-12-09, 11:15 PM
#4
Senior Member
Join Date: Oct 2009
Location: Northern/Central VA
Posts: 212
Bikes: Specialized Sirrus, Univega Activa ST Hybrid, 70's Schwinn Traveler, Giant Innova, Nishiki Mixte
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I am not sure HD sells any aluminum pipe. They sell copper, black iron, pvc, abs, galvanized steel and brass. You could try shower curtain rod.
You may run into problems with stem diameter and brakes/shifter diameter.
Before your 1st ride with this idea, could you call your life insurance agent and name MikeWinVA as the primary beneficiary?
You may run into problems with stem diameter and brakes/shifter diameter.
Before your 1st ride with this idea, could you call your life insurance agent and name MikeWinVA as the primary beneficiary?
Last edited by MikeWinVA; 12-12-09 at 11:18 PM.
12-12-09, 11:17 PM
#5
Senior Member
Join Date: Aug 2007
Location: Monterey, California
Posts: 539
Bikes: 1982 Fuji Team, 1979 Raleigh Team Record, 1984 Raleigh Team USA, Japanese Raleigh Super Course, 2000 LeMond Buenos Aires, 90's Schwinn High Plains, 1978? Austro Daimler Inter 10
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Stock aluminum round comes in just about any variety and spec you can think of. Do your research and purchase stock tubing of appropriate alloy, walthickness, and diameter. I'm afraid Home Depot may not cut the mustard. Try material suppliers or McMaster-Carr.
Do your research. find out what handle bar makers use for an alloy, what wall thickness they use, the outside diameter, anodized/hard anodized, etc. DO NOT just buy some round stock and throw it on your bike. big mistake.
Do your research. find out what handle bar makers use for an alloy, what wall thickness they use, the outside diameter, anodized/hard anodized, etc. DO NOT just buy some round stock and throw it on your bike. big mistake.
12-12-09, 11:47 PM
#7
Gear Hub fan
Join Date: Nov 2008
Location: Reno, NV
Posts: 2,829
Bikes: Civia Hyland Rohloff, Swobo Dixon, Colnago, Univega
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
One problem will be that standard stem clamp diameters are 1", 26mm or 31.8mm (1 1/4") while the area that brake levers clamp to are 7/8" (22.2mm) for MTBs or flat handlebars and 15/16" or 23.8mm for road style drop handlebars. Trying to use a bar that does not match stem diameter is considered a poor idea and most current flat bar brake levers and shifters cannot be opened up to fit a bar as large as the stem clamp diameter.
With a little looking on Amazon or other places relatively inexpensive aluminum MTB type bars are available. IMO with diameter hassles as pointed out above, and heat treating required for some alloys, this is not an easy DIY project. Bar makers typically swage the diameter needed into purchased tubing but swaging is not a home hobbyist activity.
With a little looking on Amazon or other places relatively inexpensive aluminum MTB type bars are available. IMO with diameter hassles as pointed out above, and heat treating required for some alloys, this is not an easy DIY project. Bar makers typically swage the diameter needed into purchased tubing but swaging is not a home hobbyist activity.
__________________
Gear Hubs Owned: Rohloff disc brake, SRAM iM9 disc brake, SRAM P5 freewheel, Sachs Torpedo 3 speed freewheel, NuVinci CVT, Shimano Alfine SG S-501, Sturmey Archer S5-2 Alloy. Other: 83 Colnago Super Record, Univega Via De Oro
Visit and join the Yahoo Geared Hub Bikes group for support and links.
https://groups.yahoo.com/group/Geared_hub_bikes/
Gear Hubs Owned: Rohloff disc brake, SRAM iM9 disc brake, SRAM P5 freewheel, Sachs Torpedo 3 speed freewheel, NuVinci CVT, Shimano Alfine SG S-501, Sturmey Archer S5-2 Alloy. Other: 83 Colnago Super Record, Univega Via De Oro
Visit and join the Yahoo Geared Hub Bikes group for support and links.
https://groups.yahoo.com/group/Geared_hub_bikes/
12-12-09, 11:53 PM
#9
Retro-Direct Fan
Join Date: Aug 2007
Location: Boulder, Colorado
Posts: 159
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
"handle bars are expensive."
Actually, no.
Basic MTB bar via nashbar, right now - $15
You might get something at home depot for $10 will be the wrong diameter, and if you solve that may or may not fail at a horrible moment.
I've yet to tour yard sales on a spring saturday and not find a lousy bike (with a perfectly good handlebar) for $5.
Actually, no.
Basic MTB bar via nashbar, right now - $15
You might get something at home depot for $10 will be the wrong diameter, and if you solve that may or may not fail at a horrible moment.
I've yet to tour yard sales on a spring saturday and not find a lousy bike (with a perfectly good handlebar) for $5.
12-12-09, 11:55 PM
#10
Insane Bicycle Mechanic
Join Date: Mar 2008
Location: other Vancouver
Posts: 9,863
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 813 Post(s)
Liked 731 Times
in
389 Posts
__________________
Jeff Wills
Comcast nuked my web page. It will return soon..
Jeff Wills
Comcast nuked my web page. It will return soon..
12-13-09, 12:10 AM
#11
Senior Member
Join Date: Dec 2006
Location: So Cal
Posts: 2,678
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I can't beleave you asked this. 
Try solid peice and use electrical tape for grips. mist likely will cost more than a cheap bar.
What kind do you want I'll send you one if I have it you pay shipping!
Try solid peice and use electrical tape for grips. mist likely will cost more than a cheap bar.
What kind do you want I'll send you one if I have it you pay shipping!
__________________
It may not be fancy but it gets me were I need to go.
https://www.jtgraphics.net/cyclist_bicycles.htm
It may not be fancy but it gets me were I need to go.
https://www.jtgraphics.net/cyclist_bicycles.htm
12-13-09, 07:44 AM
#12
Senior Member
Join Date: Jul 2005
Location: Backwoods of Ontario
Posts: 2,152
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
The prices I've seen on metal stock aren't any cheaper than a set of cheap bars from one of the on-line suppliers.
12-13-09, 07:54 AM
#13
Senior Member
Join Date: Apr 2005
Location: Ann Arbor, MI
Posts: 16,897
Bikes: 1980 Masi, 1984 Mondonico, 1984 Trek 610, 1980 Woodrup Giro, 2005 Mondonico Futura Leggera ELOS, 1967 PX10E, 1971 Peugeot UO-8
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1866 Post(s)
Liked 665 Times
in
507 Posts
This is a lot smarter. If you're really intent on improvising a handlebar, some kind of back alley aesthetic, use steel pipe. Much less chance of breakage compared to, say, aluminum EMT. McMaster-Carr is an amazing resource, but cheap is not one of their characteristics. What they offer is YOU CAN FIND WHAT YOU WANT, not that they give it to you cheap.
12-13-09, 08:41 AM
#14
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
As with many of these "money saving" ideas, you will spend far more time, effort and, yes, money trying to make an unsuitable substitute material work in place of a properly designed, sized and specified component. Spend less time and money and get the right thing.
12-13-09, 11:17 AM
#16
Bikaholic
Join Date: Dec 2006
Location: Western, Michigan
Posts: 1,461
Bikes: Trek Fuel 90, Giant OCR, Rans Screamer Tandem
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Remember - it's often the cheapskate that pays the most. High end bike parts may be expensive but basic handlebars do not even begin to get pricey. If your focus is on "cheap", at least make sure you are buying a used component off of a decent bike but I still can't imagine doing much better than $15 mentioned above. Do you have dental and medical insurance? One trip to the emergency room will pay for a very nice handlebar many time over. I'm just sayin!
12-13-09, 11:30 AM
#17
Bike ***** Poster
Join Date: Oct 2009
Location: Annapolis MD
Posts: 86
Bikes: Velo Orange, '91 Wicked Fat Chance, '99 Sycip Hardtail, '02 Sycip Pave custom, Benotto fixed, a playafied Bridgestone MB-3 and a bunch of hacks, beaters, townies, and 'projects'.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
if you are riding a fixxie and have no need for brake levers, then a 1" dia pipe of anything can be clamped in a 25.4 stem.
a broomstick can be used too.
a broomstick can be used too.
12-13-09, 11:53 AM
#19
hello
Actually, it's cheaper to buy a generic bicycle specific stem pipe (handlebar) than a length of stock aluminum piping. Also, safer to use too.
12-13-09, 12:00 PM
#20
All-round nice guy.
Join Date: May 2005
Location: Ontario Canada
Posts: 448
Bikes: Kish road bike, Seven mtb, Marinoni road and track bikes.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
12-13-09, 12:02 PM
#21
Senior Member
Join Date: Jul 2002
Location: Sacramento, California, USA
Posts: 40,865
Bikes: Specialized Tarmac, Canyon Exceed, Specialized Transition, Ellsworth Roots, Ridley Excalibur
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 2953 Post(s)
Liked 3,106 Times
in
1,417 Posts
Only if you have good dental insurance.
12-13-09, 07:46 PM
#23
Thrifty Bill
Join Date: Jan 2008
Location: Mountains of Western NC
Posts: 23,536
Bikes: 86 Katakura Silk, 87 Prologue X2, 88 Cimarron LE, 1975 Sekai 4000 Professional, 73 Paramount, plus more
Mentioned: 96 Post(s)
Tagged: 0 Thread(s)
Quoted: 1240 Post(s)
Liked 981 Times
in
632 Posts
"handle bars are expensive."
Actually, no.
Basic MTB bar via nashbar, right now - $15
You might get something at home depot for $10 will be the wrong diameter, and if you solve that may or may not fail at a horrible moment.
I've yet to tour yard sales on a spring saturday and not find a lousy bike (with a perfectly good handlebar) for $5.
Actually, no.
Basic MTB bar via nashbar, right now - $15
You might get something at home depot for $10 will be the wrong diameter, and if you solve that may or may not fail at a horrible moment.
I've yet to tour yard sales on a spring saturday and not find a lousy bike (with a perfectly good handlebar) for $5.
Thread
Thread Starter
Forum
Replies
Last Post
ganchan
Bicycle Mechanics
24
10-27-15 05:27 PM
MulliganAl
Bicycle Mechanics
10
08-31-15 12:37 PM
Paramount1973
Classic & Vintage
3
08-02-12 09:17 AM
