V-brake drop levers & calipers
#2
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 28,013
Bikes: Too many to list here check my signature.
Liked 3,098 Times
in
1,580 Posts
Interesting quote
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
#6
Bad example
Join Date: Nov 2015
Location: Seattle and Reims
Posts: 3,299
Bikes: Peugeot: AO-8 1973, PA-10 1971, PR-10 1973, Sante 1988; Masi Gran Criterium 1975, Stevenson Tourer 1980, Stevenson Criterium 1981, Schwinn Paramount 1972, Rodriguez 2006, Gitane Federal ~1975, Holdsworth Pro, Follis 172 ~1973, Bianchi '62
Liked 439 Times
in
208 Posts
#7
Senior Member
Join Date: Aug 2017
Location: Toronto, Ontario
Posts: 110
Bikes: Giant Talon 3 2016, Peugeot Sprint 1995
Likes: 0
Liked 0 Times
in
0 Posts
#10
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 13,052
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Liked 4,079 Times
in
2,641 Posts
Edit: Attn: Aubergine
I use those levers with my dual pivots on two bikes and '80s Shimano OEM cantis. Best braking I have ever had.
I did it originally with some no-name levers I picked up used, not realizing they were V-brake,just liking the huge hoods for serious fix gear mountain climbing. Early on, I rode up, then down McKenzie Pass from Sisters, OR. On the way down I came into a blind corner very hot and realized it was both steeper and tighter than anything I had seen. Grabbed a handful! Bike slowed very fast with no lockup and both wheels feeling planted. Made the corner easily. I've been sold ever since. My Peter Mooney, with its V-brake levers and cantis, is the best stopping bike I have ever owned.
I have far better, more predictable braking on every bike I have removed the traditional levers (mostly modern era Tektros) with those Tektro V-brake levers pictured here.
One caveat. You need big, decently strong hands. If you brake largely from the hoods, you may feel you do not have enough power. If you ride like me and stick to the drops when it matters, my setups are wonderfu;l.
Ben
I use those levers with my dual pivots on two bikes and '80s Shimano OEM cantis. Best braking I have ever had.
I did it originally with some no-name levers I picked up used, not realizing they were V-brake,just liking the huge hoods for serious fix gear mountain climbing. Early on, I rode up, then down McKenzie Pass from Sisters, OR. On the way down I came into a blind corner very hot and realized it was both steeper and tighter than anything I had seen. Grabbed a handful! Bike slowed very fast with no lockup and both wheels feeling planted. Made the corner easily. I've been sold ever since. My Peter Mooney, with its V-brake levers and cantis, is the best stopping bike I have ever owned.
I have far better, more predictable braking on every bike I have removed the traditional levers (mostly modern era Tektros) with those Tektro V-brake levers pictured here.
One caveat. You need big, decently strong hands. If you brake largely from the hoods, you may feel you do not have enough power. If you ride like me and stick to the drops when it matters, my setups are wonderfu;l.
Ben
#11
Senior Member
Join Date: Aug 2017
Location: Toronto, Ontario
Posts: 110
Bikes: Giant Talon 3 2016, Peugeot Sprint 1995
Likes: 0
Liked 0 Times
in
0 Posts
Edit: Attn: Aubergine
I use those levers with my dual pivots on two bikes and '80s Shimano OEM cantis. Best braking I have ever had.
I did it originally with some no-name levers I picked up used, not realizing they were V-brake,just liking the huge hoods for serious fix gear mountain climbing. Early on, I rode up, then down McKenzie Pass from Sisters, OR. On the way down I came into a blind corner very hot and realized it was both steeper and tighter than anything I had seen. Grabbed a handful! Bike slowed very fast with no lockup and both wheels feeling planted. Made the corner easily. I've been sold ever since. My Peter Mooney, with its V-brake levers and cantis, is the best stopping bike I have ever owned.
I have far better, more predictable braking on every bike I have removed the traditional levers (mostly modern era Tektros) with those Tektro V-brake levers pictured here.
One caveat. You need big, decently strong hands. If you brake largely from the hoods, you may feel you do not have enough power. If you ride like me and stick to the drops when it matters, my setups are wonderfu;l.
Ben
I use those levers with my dual pivots on two bikes and '80s Shimano OEM cantis. Best braking I have ever had.
I did it originally with some no-name levers I picked up used, not realizing they were V-brake,just liking the huge hoods for serious fix gear mountain climbing. Early on, I rode up, then down McKenzie Pass from Sisters, OR. On the way down I came into a blind corner very hot and realized it was both steeper and tighter than anything I had seen. Grabbed a handful! Bike slowed very fast with no lockup and both wheels feeling planted. Made the corner easily. I've been sold ever since. My Peter Mooney, with its V-brake levers and cantis, is the best stopping bike I have ever owned.
I have far better, more predictable braking on every bike I have removed the traditional levers (mostly modern era Tektros) with those Tektro V-brake levers pictured here.
One caveat. You need big, decently strong hands. If you brake largely from the hoods, you may feel you do not have enough power. If you ride like me and stick to the drops when it matters, my setups are wonderfu;l.
Ben