Powertap SL+ wheel For Sale
#1
Senior Member
Thread Starter
Join Date: Dec 2006
Location: So Cal
Posts: 2,678
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Powertap SL+ wheel For Sale
Powertap SL+ wheel built by (Rob) Pismet Custom Wheel Builder. Photos show Easton SLX90 these are stickers to match another wheel
set I have they can be removed easily.
Wheel weighing in at 1001g w/o tape or skew.
Laced to a Kinlin XR-270 rim 24r/2X using CXRay-Black spokes on the Drive Side and laced 2X using Sapim XRay-Black spokes on the Non-Drive Side and DT-12mm-Brass-Silver nipples which is what was suggested by Rob for my needs.
I no longer use it only used 400 miles the 10speed Sram/Shimano hub no gouges in it very clean wheel not abused, just have no use for it as I thought.
Would like $450 shipped in US.
set I have they can be removed easily.
Wheel weighing in at 1001g w/o tape or skew.
Laced to a Kinlin XR-270 rim 24r/2X using CXRay-Black spokes on the Drive Side and laced 2X using Sapim XRay-Black spokes on the Non-Drive Side and DT-12mm-Brass-Silver nipples which is what was suggested by Rob for my needs.
I no longer use it only used 400 miles the 10speed Sram/Shimano hub no gouges in it very clean wheel not abused, just have no use for it as I thought.
Would like $450 shipped in US.
__________________
It may not be fancy but it gets me were I need to go.
https://www.jtgraphics.net/cyclist_bicycles.htm
It may not be fancy but it gets me were I need to go.
https://www.jtgraphics.net/cyclist_bicycles.htm
Last edited by JTGraphics; 08-03-18 at 08:54 AM. Reason: Photos