Quick question - Shimano 9 cassette with Campy 10 drivetrain?
#1
Veteran, Pacifist
Thread Starter
Join Date: Dec 2004
Location: Seattle area
Posts: 13,819
Bikes: Bikes??? Thought this was social media?!?
Liked 5,822 Times
in
2,502 Posts
Quick question - Shimano 9 cassette with Campy 10 drivetrain?
I've not run Campy+Shimano drivetrains, and I know the answer is somewhere in a thread ……
On a Campy 10 drivetrain (pre-2006) will a DuraAce 9 cassette work? Without modification to spacers.
TIA
On a Campy 10 drivetrain (pre-2006) will a DuraAce 9 cassette work? Without modification to spacers.
TIA
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
#2
Senior Member
Join Date: May 2012
Location: Point Reyes Station, California
Posts: 4,631
Bikes: Indeed!
Liked 3,800 Times
in
1,197 Posts
Shimano 9-speed casette spacing is 4.35mm. Campag 10-speed is 4.15mm. I haven't tried this combo but my guess is that shifting may be a little sloppy at either end of the cassette if adjusted perfectly in the middle.
Brent
Brent
#3
Nope: won't work: too much difference in cog center to center dimensions. I've put together many unholy combinations of Shimano and Campagnolo, and this is outside of acceptable tolerances.
What does work perfectly is a Shimano 10-speed cassette using Campagnolo 10-speed shifters and a Campagnolo indexing rear derailleur from 1992 to 2000.
What does work perfectly is a Shimano 10-speed cassette using Campagnolo 10-speed shifters and a Campagnolo indexing rear derailleur from 1992 to 2000.
#4
Veteran, Pacifist
Thread Starter
Join Date: Dec 2004
Location: Seattle area
Posts: 13,819
Bikes: Bikes??? Thought this was social media?!?
Liked 5,822 Times
in
2,502 Posts
Thanks.