Light mount for rim brakes & handlebar bag
#1
Senior Member
Thread Starter
Light mount for rim brakes & handlebar bag
All -
I've been torn between posting this in commuting, touring, and here. As the bike is being used for the other two purposes. I'm departing in late September for a week long credit-card tour with some buddies and we're traveling light. I'm going with my Mercian, a handlebar mounted bag (Swift Paloma) and some panniers.
My Mercian has brake calipers (Tektro 539s) and no front rack or fork braze-on mounts. I most likely won't be putting fenders on as it doesn't rain in the greater Sacramento area till October (if we're lucky).
Due to the size of my bag and it's locating, handlebar mounted lights are out. I tried a VO mount (https://velo-orange.com/collections/...ccessory-mount) and didn't love it. I found that the beam sat up too high/parallel to the ground and on a few test rides with friends had them complaining about head on blindness.
Looking for some assistance recommendations on alternatives. I have dual Bontrager Ion lights at my disposal (no helmet mount).
I've been torn between posting this in commuting, touring, and here. As the bike is being used for the other two purposes. I'm departing in late September for a week long credit-card tour with some buddies and we're traveling light. I'm going with my Mercian, a handlebar mounted bag (Swift Paloma) and some panniers.
My Mercian has brake calipers (Tektro 539s) and no front rack or fork braze-on mounts. I most likely won't be putting fenders on as it doesn't rain in the greater Sacramento area till October (if we're lucky).
Due to the size of my bag and it's locating, handlebar mounted lights are out. I tried a VO mount (https://velo-orange.com/collections/...ccessory-mount) and didn't love it. I found that the beam sat up too high/parallel to the ground and on a few test rides with friends had them complaining about head on blindness.
Looking for some assistance recommendations on alternatives. I have dual Bontrager Ion lights at my disposal (no helmet mount).
#2
Senior Member
Join Date: Sep 2017
Location: Eastern Shore, MD
Posts: 2,108
Bikes: Road ready: 1993 Koga Miyata City Liner Touring Hybrid, 1989 Centurion Sport DLX, "I Blame GP" Bridgestone CB-1. Projects: Yea, I got a problem....
Liked 741 Times
in
423 Posts
I just ordered a "Nob" computer mount. Peter White has them on his web site with pictures of them used as fork mounts for dynamo lights. Their on ebay but there seem to have been 3 or 4 different brand name versions. I'm useing the "Nob" to mount a battery light to one of the bull horns of a Velo Orange Crazy bar, for the the same reason of clearing the handle bar bag.
#3
Me duelen las nalgas
Join Date: Aug 2015
Location: Texas
Posts: 13,513
Bikes: Centurion Ironman, Trek 5900, Univega Via Carisma, Globe Carmel
Liked 2,807 Times
in
1,803 Posts
When I use an AGU handlebar bag with KlickFix mount it blocks most handlebar mounted accessories -- lights, video camera.
So I mount my light on the head tube. It clears underneath the bag, no problems with seeing the road, and the bottom of the bag blocks spill overhead where it doesn't illuminate much of anything useful anyway.
I've used a NiteRider Lumina and Light & Motion Urban light that way. No problems.
If the light's supplied mount doesn't cover the head tube, a Two Fish rubber light mount block with velcro straps may work as a substitute. I used a Two Fish mount to replace my Light & Motion headlight's broken rubber band mount.
A couple of friends use light mounts on their forks with dual headlights. Works fine. I don't know what hardware they use but there are a few options for fork mounts.
So I mount my light on the head tube. It clears underneath the bag, no problems with seeing the road, and the bottom of the bag blocks spill overhead where it doesn't illuminate much of anything useful anyway.
I've used a NiteRider Lumina and Light & Motion Urban light that way. No problems.
If the light's supplied mount doesn't cover the head tube, a Two Fish rubber light mount block with velcro straps may work as a substitute. I used a Two Fish mount to replace my Light & Motion headlight's broken rubber band mount.
A couple of friends use light mounts on their forks with dual headlights. Works fine. I don't know what hardware they use but there are a few options for fork mounts.
#4
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,686
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Liked 2,645 Times
in
1,535 Posts
It's ugly, but it works great. I took some PVC pipe and cut it short. I mitered the inner end to fit the contour of the fork. I cut slits in it with a hacksaw. I attached it to the fork with a hose clamp. You see the rubber band light mount on it.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#5
Senior Member
Thread Starter
Thanks all the tips so far. The 'nob' looks worth a try to start and then go from there. I'm reluctant to put a hose clamp on my fork (and damage the wonderful paint) but if I put an insulation barrier between it and the fork that would work.
Looks like there's options!
Looks like there's options!
#6
Car-free in the South
Fork crown mounts are easily the best option, and will clear your bags. Lights on the fork blades tend to leave a huge shadow. Your Mercian deserves something classy, too.
#7
Senior Member
I bought a hokey accessory bar that clamps to the handlebar, but, despite juggling with its spacers to try to get it to stay put it was always moving going over bumps. The solution was to mount it straight up vertically so gravity didn't pull it down. With it being vertical it also has easier access while riding being closer to me than stuff mounted directly on the handlebar.
#8
Check this thread:
https://www.bikeforums.net/electroni...ole-mount.html
https://www.bikeforums.net/electroni...ole-mount.html
#9
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,686
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Liked 2,645 Times
in
1,535 Posts
Check this thread:
https://www.bikeforums.net/electroni...ole-mount.html
https://www.bikeforums.net/electroni...ole-mount.html
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#10
Me duelen las nalgas
Join Date: Aug 2015
Location: Texas
Posts: 13,513
Bikes: Centurion Ironman, Trek 5900, Univega Via Carisma, Globe Carmel
Liked 2,807 Times
in
1,803 Posts
There are aluminum mounts similar to Tom's homebrew that mount to quick releases (or fixed skewers) or fork crown holes for fenders/brakes. They don't cost too much either.
The trick to minimizing shadows with fork mounted lights is to mount pairs, one on each fork. At least two folks I ride with do that. Works fine. Enhances their to-be-seen visibility from afar as well.
The trick to minimizing shadows with fork mounted lights is to mount pairs, one on each fork. At least two folks I ride with do that. Works fine. Enhances their to-be-seen visibility from afar as well.
#11
Zoom zoom zoom zoom bonk
Join Date: Sep 2006
Location: New Zealand
Posts: 4,660
Bikes: Giant Defy, Trek 1.7c, BMC GF02, Fuji Tahoe, Scott Sub 35, Kona Rove, Trek Verve+2
Liked 741 Times
in
378 Posts
Depending on how deep your handlebar bag is a fork crown mount might fit
https://www.sjscycles.co.uk/accessor...ssory-bracket/
https://www.sjscycles.co.uk/accessor...ssory-bracket/
#12
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,686
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Liked 2,645 Times
in
1,535 Posts
There are aluminum mounts similar to Tom's homebrew that mount to quick releases (or fixed skewers) or fork crown holes for fenders/brakes. They don't cost too much either.
The trick to minimizing shadows with fork mounted lights is to mount pairs, one on each fork. At least two folks I ride with do that. Works fine. Enhances their to-be-seen visibility from afar as well.
The trick to minimizing shadows with fork mounted lights is to mount pairs, one on each fork. At least two folks I ride with do that. Works fine. Enhances their to-be-seen visibility from afar as well.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#13
Me duelen las nalgas
Join Date: Aug 2015
Location: Texas
Posts: 13,513
Bikes: Centurion Ironman, Trek 5900, Univega Via Carisma, Globe Carmel
Liked 2,807 Times
in
1,803 Posts
I've noticed that problem with the fork-mounted lights a couple of friends use. They can be quite blinding.
That problem could be resolved if more bike headlights used beam shaping lenses like automobile and motorcycle headlights. But there are few of those for bicycles.
That problem could be resolved if more bike headlights used beam shaping lenses like automobile and motorcycle headlights. But there are few of those for bicycles.
#14
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,686
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Liked 2,645 Times
in
1,535 Posts
I've noticed that problem with the fork-mounted lights a couple of friends use. They can be quite blinding.
That problem could be resolved if more bike headlights used beam shaping lenses like automobile and motorcycle headlights. But there are few of those for bicycles.
That problem could be resolved if more bike headlights used beam shaping lenses like automobile and motorcycle headlights. But there are few of those for bicycles.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#15
Senior Member
Join Date: Aug 2010
Location: Madison, WI
Posts: 11,344
Bikes: 1961 Ideor, 1966 Perfekt 3 Speed AB Hub, 1994 Bridgestone MB-6, 2006 Airnimal Joey, 2009 Thorn Sherpa, 2013 Thorn Nomad MkII, 2015 VO Pass Hunter, 2017 Lynskey Backroad, 2017 Raleigh Gran Prix, 1980s Bianchi Mixte on a trainer. Others are now gone.
Liked 1,505 Times
in
1,175 Posts
As mentioned above, mounting a light at axle height is not ideal but I did that on my errand bike. I was not planning to put a dynohub wheel on that bike since I rarely ride it after dark, but I got a fantastic deal from a dealer on a new wheel that was pulled off of another bike. And I had a vintage dyno powered light in storage, so I upgraded the bike to dyno headlamp. The light is mounted on a piece of threaded rod in the fender mount on the fork dropout.
#16
Senior Member
Join Date: Jul 2008
Location: 25 miles northwest of Boston
Posts: 29,595
Bikes: Bottecchia Sprint, GT Timberline 29r, Marin Muirwoods 29er, Trek FX Alpha 7.0
Liked 3,612 Times
in
2,360 Posts
Peter White has some ideas
https://www.peterwhitecycles.com/light-mounts.php
I have some things I saved on my Amazon wish list that might be of interest
https://www.amazon.com/dp/B01AUPC1F6...v_ov_lig_dp_it
https://www.amazon.com/dp/B0761RX64G...v_ov_lig_dp_it
https://www.amazon.com/dp/B001CJXB5E...v_ov_lig_dp_it
https://www.amazon.com/dp/B00458F88C...v_ov_lig_dp_it
https://www.amazon.com/dp/B0029LKZNU...v_ov_lig_dp_it
but what about going back to that high bar mount you have & pointing your light down a little? maybe add a DIY beam cutoff hood? but maybe that bag would make a distracting shadow? so you have panniers then you have a rear rack? do you also have a trunk on top of that rack? if not, add that & ditch the front bar bag?
https://www.peterwhitecycles.com/light-mounts.php
I have some things I saved on my Amazon wish list that might be of interest
https://www.amazon.com/dp/B01AUPC1F6...v_ov_lig_dp_it
https://www.amazon.com/dp/B0761RX64G...v_ov_lig_dp_it
https://www.amazon.com/dp/B001CJXB5E...v_ov_lig_dp_it
https://www.amazon.com/dp/B00458F88C...v_ov_lig_dp_it
https://www.amazon.com/dp/B0029LKZNU...v_ov_lig_dp_it
but what about going back to that high bar mount you have & pointing your light down a little? maybe add a DIY beam cutoff hood? but maybe that bag would make a distracting shadow? so you have panniers then you have a rear rack? do you also have a trunk on top of that rack? if not, add that & ditch the front bar bag?
Last edited by rumrunn6; 07-17-19 at 07:50 AM.
#17
Senior Member
Thread Starter
Interesting, in doing some additional research, I never thought about the quick release mounts. The handlebar mount that creates the elevated rail isn't going to work with the length/depth of my bag. The light has to be too close to parallel to the ground and even on low beam it was blinding oncoming traffic/cyclists. About 8 miles of my daily commute is on a two way MUP so I can't have that, long-term.
#18
Senior Member
Join Date: Jul 2018
Location: USA
Posts: 2,190
Bikes: Ti, Mn Cr Ni Mo Nb, Al, C
Liked 527 Times
in
349 Posts
All -
I've been torn between posting this in commuting, touring, and here. As the bike is being used for the other two purposes. I'm departing in late September for a week long credit-card tour with some buddies and we're traveling light. I'm going with my Mercian, a handlebar mounted bag (Swift Paloma) and some panniers.
My Mercian has brake calipers (Tektro 539s) and no front rack or fork braze-on mounts. I most likely won't be putting fenders on as it doesn't rain in the greater Sacramento area till October (if we're lucky).
Due to the size of my bag and it's locating, handlebar mounted lights are out. I tried a VO mount (https://velo-orange.com/collections/...ccessory-mount) and didn't love it. I found that the beam sat up too high/parallel to the ground and on a few test rides with friends had them complaining about head on blindness.
Looking for some assistance recommendations on alternatives. I have dual Bontrager Ion lights at my disposal (no helmet mount).
I've been torn between posting this in commuting, touring, and here. As the bike is being used for the other two purposes. I'm departing in late September for a week long credit-card tour with some buddies and we're traveling light. I'm going with my Mercian, a handlebar mounted bag (Swift Paloma) and some panniers.
My Mercian has brake calipers (Tektro 539s) and no front rack or fork braze-on mounts. I most likely won't be putting fenders on as it doesn't rain in the greater Sacramento area till October (if we're lucky).
Due to the size of my bag and it's locating, handlebar mounted lights are out. I tried a VO mount (https://velo-orange.com/collections/...ccessory-mount) and didn't love it. I found that the beam sat up too high/parallel to the ground and on a few test rides with friends had them complaining about head on blindness.
Looking for some assistance recommendations on alternatives. I have dual Bontrager Ion lights at my disposal (no helmet mount).