I need some pantographing done
#1
I never finish anyth
Thread Starter
I need some pantographing done
I have a 3T stem on my Pinarello that is pantographed "Pinarello" but it is too short for a decent fit. I found a replacement that will work, but before I replace the current stem I'd like to have the new stem pantographed.
The current stem should be usable as a model. it is pantographed on both sides.
Anyone?
The current stem should be usable as a model. it is pantographed on both sides.
Anyone?
__________________
Dale, NL4T
Dale, NL4T
#2
multimodal commuter
Join Date: Nov 2006
Location: NJ, NYC, LI
Posts: 19,811
Bikes: 1940s Fothergill, 1959 Allegro Special, 1963? Claud Butler Olympic Sprint, Lambert 'Clubman', 1974 Fuji "the Ace", 1976 Holdsworth 650b conversion rando bike, 1983 Trek 720 tourer, 1984 Counterpoint Opus II, 1993 Basso Gap, 2010 Downtube 8h, and...
Liked 577 Times
in
342 Posts
See if you can make contact with the guy who runs Cyclomondo CYCLOMONDO - BICYCLE RESTORATION DECALS. He's in Australia. He was doing pantographing for a while. I see it's no longer on his website, so I assume it wasn't economical or something, but he would definitely be able to tell you what's involved. I've never had any contact with him, though, so I dunno what he'll say, if anything.
__________________
www.rhmsaddles.com.
www.rhmsaddles.com.
#3
1/2 as far in 2x the time
Join Date: Nov 2013
Location: Northern Bergen County, NJ
Posts: 1,746
Bikes: Yes, Please.
Liked 286 Times
in
222 Posts
I have a 3T stem on my Pinarello that is pantographed "Pinarello" but it is too short for a decent fit. I found a replacement that will work, but before I replace the current stem I'd like to have the new stem pantographed.
The current stem should be usable as a model. it is pantographed on both sides.
Anyone?
The current stem should be usable as a model. it is pantographed on both sides.
Anyone?
__________________
I seem to have lost what little mind I had left before this all started.
I seem to have lost what little mind I had left before this all started.
#4
verktyg
Simple local solution: find a business that does engraving like a trophy shop.
It could also be done on a CNC milling machine that has an engraving program.
It's probably going to cost you because of the set up time to do an individual part.
verktyg
It could also be done on a CNC milling machine that has an engraving program.
It's probably going to cost you because of the set up time to do an individual part.
verktyg
__________________
Don't believe everything you think! History is written by those who weren't there....
Chas. ;-)
Don't believe everything you think! History is written by those who weren't there....
Chas. ;-)
#5
Senior Member
Cyclo Retro in Melbourne, Australia do some amazing work: https://www.cycloretro.com/
Maybe cost prohibitive with postage, but hey, the exchange rate is on your side.
Maybe cost prohibitive with postage, but hey, the exchange rate is on your side.
#6
Senior Member
Cyclo Retro in Melbourne, Australia do some amazing work: https://www.cycloretro.com/
Maybe cost prohibitive with postage, but hey, the exchange rate is on your side.
Maybe cost prohibitive with postage, but hey, the exchange rate is on your side.
Likes For bwilli88:
#8
Banned.
#9
I never finish anyth
Thread Starter
[MENTION=108582]RobbieTunes[/MENTION], kind of a personal question. The stem is 70mm.
__________________
Dale, NL4T
Dale, NL4T
#10
Touch base with fellow BF’er Stephen Needles. Guy does it as a hobby. He’s in England, which makes shipping rather pricey, but does incredible work.
Have a couple pieces being shipped back, can provide pics when they arrive...to be mounted on a VERY SPECIAL Grail-level acquisition that is otherwise complete.
Have a couple pieces being shipped back, can provide pics when they arrive...to be mounted on a VERY SPECIAL Grail-level acquisition that is otherwise complete.
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
#11
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,838
Bikes: Bikes??? Thought this was social media?!?
Liked 5,855 Times
in
2,507 Posts
subscribed -
any Puget Sound pantographers?
edit: could use some DeRosa, Merckx, Mondia. Maybe others.
Price sounds within the 'gift request budget' that my kids set for b'day and xmas prezzies.
they often have easy arms for twisting.
any Puget Sound pantographers?
edit: could use some DeRosa, Merckx, Mondia. Maybe others.
Price sounds within the 'gift request budget' that my kids set for b'day and xmas prezzies.
they often have easy arms for twisting.
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
Last edited by Wildwood; 05-27-20 at 12:56 PM.
#12
Senior Member
that is Australian dollars, so around $US100
and postage calculator is at https://auspost.com.au/parcels-mail/...mPostcode=3000
also in $A
and postage calculator is at https://auspost.com.au/parcels-mail/...mPostcode=3000
also in $A