Eyelet size for racks
#1
Senior Member
Thread Starter
Eyelet size for racks
What is the screw size for those eyelet holes for racks and fenders on drop outs and frame?I lost my screws acorn nuts.Thanks in advance.
#3
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,195
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Liked 4,001 Times
in
2,379 Posts
Some racks as well as some frames have a 6mm hole/thread for the drop out mount. One measurement is worth a lot. If you have no measuring tools but have a mounted bottle cage it's bolts are nearly always a 5mm. Remove one bolt and test insert into the rack/eyelet and judge the fit. Andy
__________________
AndrewRStewart
AndrewRStewart
#4
Senior Member
Thread Starter
Some racks as well as some frames have a 6mm hole/thread for the drop out mount. One measurement is worth a lot. If you have no measuring tools but have a mounted bottle cage it's bolts are nearly always a 5mm. Remove one bolt and test insert into the rack/eyelet and judge the fit. Andy
#5
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,871
Bikes: Several, mostly not name brands.
Liked 3,476 Times
in
1,972 Posts
Most eyelets are 5mm x 0.8mm, as noted above. Some are 6mm x 1mm. Some are unthreaded. Some may even be British Whitworth thread. It depends on your bike, where it was made, and how old it is.