Managing sensors
#1
Senior Member
Thread Starter
Managing sensors
I’m using a Garmin Edge 1030 on two different bikes. Each bike has it’s own set of cadence, speed, and power sensors. Is there anyway to assign one set do. Sensors with a particular bike? Or am I just going to have to remember the appropriate sensor ID’s for the machine I’m on?
#2
Full Member
Join Date: Jul 2019
Location: Greer, SC
Posts: 344
Bikes: GR300, Grail, Live Wire, 5010
Liked 241 Times
in
121 Posts
I’m using a Garmin Edge 1030 on two different bikes. Each bike has it’s own set of cadence, speed, and power sensors. Is there anyway to assign one set do. Sensors with a particular bike? Or am I just going to have to remember the appropriate sensor ID’s for the machine I’m on?
I don’t see how you would have an issue unless both of your bikes were being ridden next to each other at the same time.
#3
Senior Member
Thread Starter
Thanks for the input. Seems the sensors on one bike hadn’t gone completely asleep before I got on the rollers with the other one. That seemed to confuse my 1030 enough to make it reluctant to connect to a different batch of sensors. If I make sure there’s only one set awake, the Garmin does behave like your Wahoo.
Likes For bmcer: