Suntour Cone Adjustment Spanner & Clearance Gauge
#1
Senior Member
Thread Starter
Suntour Cone Adjustment Spanner & Clearance Gauge
Spanner: $32 shipped
Gauges: $22 shipped
OR BOTH FOR: $42 shipped
SALE PENDING
Paypal only. F&F or add 3% for G&S
Gauges: $22 shipped
OR BOTH FOR: $42 shipped
SALE PENDING
Paypal only. F&F or add 3% for G&S
Last edited by deux jambes; 07-13-21 at 04:07 PM.
#2
Senior Member
Thread Starter
Last edited by deux jambes; 07-12-21 at 04:05 PM.
#3
Senior Member
Interesting pieces. What are the freewheel clearance gauges used for?
#4
Senior Member
The TA-350 was an aid to encourage correct freewheel spacing. This was very helpful when a single freewheel body could be built in multiple configurations, especially when many of the cogs were threaded, requiring the not-infrequent use of microspacers. Additionally required in the case of Ultra-6/Ultra-7 builds, where the spacing in the outer-position cogs was different from the inner-position cogs.
__________________
Fuggedaboutit!
Fuggedaboutit!
#5
Senior Member
Join Date: Oct 2017
Location: NJ
Posts: 678
Bikes: 68 SS, 72 Fuji Finest, 72 PX-10, 77 Pana Pro 7000, 84 Pinnarello Treviso NR, 84 Trek 520, 88 Project KOM, 90 Trek 750, 91 Trek 930
Liked 229 Times
in
157 Posts
Spanner PM
The spanner is for sealed bearing hubs?
The spanner is for sealed bearing hubs?
__________________
Last new bike 1991
Last new bike 1991
Last edited by dmark; 07-12-21 at 04:14 PM.
#6
verktyg
Freewheel Spacing Gauge
The TA-350 was an aid to encourage correct freewheel spacing. This was very helpful when a single freewheel body could be built in multiple configurations, especially when many of the cogs were threaded, requiring the not-infrequent use of microspacers. Additionally required in the case of Ultra-6/Ultra-7 builds, where the spacing in the outer-position cogs was different from the inner-position cogs.
I've run across FWs with one or two sprockets where the spacing was too narrow or too wide and was able to easily correct the problem. More of an issue with friction shifting, also chain width.
Works great for quick ID of narrow vs. standard width 6 speed FWs too. Measuring the width of the FW isn't always the best way to tell narrow from standard as some FWs have wider bodies.
verktyg
deux jambes I always wondered what the Cone Adjustment Spanner was for! Now I know...
__________________
Don't believe everything you think! History is written by those who weren't there....
Chas. ;-)
Don't believe everything you think! History is written by those who weren't there....
Chas. ;-)
Likes For verktyg:
#7
Senior Member
Join Date: Oct 2017
Location: NJ
Posts: 678
Bikes: 68 SS, 72 Fuji Finest, 72 PX-10, 77 Pana Pro 7000, 84 Pinnarello Treviso NR, 84 Trek 520, 88 Project KOM, 90 Trek 750, 91 Trek 930
Liked 229 Times
in
157 Posts
"The SunTour Spanner? It’s for New Winner freewheels."
...per the OP
Thank you I don't really need this.
...per the OP
Thank you I don't really need this.
#8
tantum vehi
Join Date: Jul 2008
Location: Flathead Valley, MT
Posts: 4,464
Bikes: More than I care to admit
Liked 1,050 Times
in
509 Posts
I have a set of SunTour XC hubs that have a notched lock ring/cone. I have never adjusted them because I don’t have the tool. And because my wife rides that bike about 50 miles each year. It looks like this may be the tool?
__________________
1970 Gitane TdF; 1973 Gitane TdF
1979 Trek 710; 1981 Trek 412; 1981 Trek 710
1984 Specialized Stumpjumper Sport; 1985 Specialized Allez SE; 1988 Specialized Sirrus; 1989 Specialized Rock Combo
1984 Ross Mt. Hood
1988 Centurion Ironman Expert
1991 Bridgestone RB-1
1992 Serotta Colorado TG
2015 Elephant NFE
1979 Trek 710; 1981 Trek 412; 1981 Trek 710
1984 Specialized Stumpjumper Sport; 1985 Specialized Allez SE; 1988 Specialized Sirrus; 1989 Specialized Rock Combo
1984 Ross Mt. Hood
1988 Centurion Ironman Expert
1991 Bridgestone RB-1
1992 Serotta Colorado TG
2015 Elephant NFE
#9
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 25,043
Bikes: Several, mostly not name brands.
Liked 3,675 Times
in
2,077 Posts
No, as noted, it's for the New Winner freewheel bearing adjustment. The XC hubs use a different tool:
#10
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,670
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Liked 2,600 Times
in
1,593 Posts
deux jambes I always wondered what the Cone Adjustment Spanner was for! Now I know...
#11
tantum vehi
Join Date: Jul 2008
Location: Flathead Valley, MT
Posts: 4,464
Bikes: More than I care to admit
Liked 1,050 Times
in
509 Posts
Ah, for the cones of the freewheel. It should only take five or six posts before we all get this through our heads.
__________________
1970 Gitane TdF; 1973 Gitane TdF
1979 Trek 710; 1981 Trek 412; 1981 Trek 710
1984 Specialized Stumpjumper Sport; 1985 Specialized Allez SE; 1988 Specialized Sirrus; 1989 Specialized Rock Combo
1984 Ross Mt. Hood
1988 Centurion Ironman Expert
1991 Bridgestone RB-1
1992 Serotta Colorado TG
2015 Elephant NFE
1979 Trek 710; 1981 Trek 412; 1981 Trek 710
1984 Specialized Stumpjumper Sport; 1985 Specialized Allez SE; 1988 Specialized Sirrus; 1989 Specialized Rock Combo
1984 Ross Mt. Hood
1988 Centurion Ironman Expert
1991 Bridgestone RB-1
1992 Serotta Colorado TG
2015 Elephant NFE
Likes For mountaindave: