Is this crack terminal ??
#1
Junior Member
Thread Starter
Join Date: Apr 2005
Location: Oz
Posts: 153
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 6 Times
in
3 Posts
Is this crack terminal ??
Hi, I was rather dismayed today to find this crack on my old Teschner aluminum frame that I am quite attached to .
I have reluctantly concluded this it is probably not safe to ride, but would appreciate an opinion on whether it is
1. repairable
2. worth repairing
Thanks
I have reluctantly concluded this it is probably not safe to ride, but would appreciate an opinion on whether it is
1. repairable
2. worth repairing
Thanks
#2
Senior Member
Join Date: Dec 2019
Posts: 972
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 329 Post(s)
Liked 265 Times
in
214 Posts
My guess is sadly not. I don't weld aluminium but generally quality alu frames need heat-treatments. So even if you cut the TT and DT a bit shorter and rewelded the HT on I think the whole thing would need to be stripped of paint and heat-treated in an oven. You could of course just bodge it and it would probably be OK but only worth doing that as an amateur project.
#3
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,460
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,761 Times
in
2,560 Posts
Thanks for the great pics. I would never have that fixed. It has been there so long the copious crack face surface area has been oxidized and fouled with dirt. And due to the number of times the crack has branched, it would be difficult to get it back into shape. This is in addition to the potential problems with heat treating.
#4
Senior Member
Join Date: Jan 2014
Location: The banks of the River Charles
Posts: 2,030
Bikes: 2022 Salsa Beargrease, 2020 Seven Evergreen, 2019 Honey Allroads Ti, 2018 Seven Redsky XX, 2017 Trek Boon 7, 2014 Trek 520
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 696 Post(s)
Liked 910 Times
in
487 Posts
I would replace the frame if you can get another Teschner frame or become attached to your next bike. A proper repair would not be economically feasible.
#6
Senior Member
Join Date: May 2010
Location: Bastrop Texas
Posts: 4,545
Bikes: Univega, Peu P6, Peu PR-10, Ted Williams, Peu UO-8, Peu UO-18 Mixte, Peu Dolomites
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 999 Post(s)
Liked 1,671 Times
in
1,073 Posts
Wow... Great thread... I continue to learn allot about bicycles in general. My experience is in Steel bikes. If this were a steel bike I guess you could consider a repair but in that its aluminum, its a gonner. If that's the case it looks like a new frame and transfer of components is in order...
__________________
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
#7
Junior Member
Thread Starter
Join Date: Apr 2005
Location: Oz
Posts: 153
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 6 Times
in
3 Posts
Thanks for the replies, well I guess that's pretty conclusive then
Time to start hunting a new old frame..... again....these components (mainly 105) and wheels originally all came off a bike with a broken frame that I bought for AU$80 and put onto the Teschner frame
Time to start hunting a new old frame..... again....these components (mainly 105) and wheels originally all came off a bike with a broken frame that I bought for AU$80 and put onto the Teschner frame