Power meter calibration always 0
#1
Newbie
Thread Starter
Join Date: Aug 2019
Posts: 36
Likes: 0
Liked 0 Times
in
0 Posts
Power meter calibration always 0
Upon attempting to calibrate the Giant Power Pro Ultegra R8000, using my Garmin Edge, it always yields 0 when doing the calibration procedure.
From others that have a power meter, is this normal? Shouldn't I expect to see something else than 0, at times? This leads me to believe something is wrong with the product.
From others that have a power meter, is this normal? Shouldn't I expect to see something else than 0, at times? This leads me to believe something is wrong with the product.
#2
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 39,647
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Liked 3,484 Times
in
1,912 Posts
Sorry,
We're all mechanics here. You need an electrician.
(couldn't resist).
Hopefully, someone who uses this stuff will step up.
We're all mechanics here. You need an electrician.
(couldn't resist).
Hopefully, someone who uses this stuff will step up.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.