Rotor 11-39 12S With Shimano GRX RX820
#1
Newbie
Thread Starter
Join Date: May 2024
Posts: 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Rotor 11-39 12S With Shimano GRX RX820
Morning!
I just purchased a Canyon Grizl AL 7. It has the 12 speed GRX groupset. My previous bike was the previous Gen Grizl AL 7 with the 11 speed groupset. I was using the Shimano 11S 11-40 cassette on that bike (2X setup 46-30 cranks) and I absolutely Loved my climbing gear with the 11-40 cassette. With the 12S on my new bike it comes with the 11-36 cassette and that’s just not quite enough for the steep gravel roads. I’m wondering if there is anyone here who has used the Rotor 11-39 12S cassette with a 2X Shimano GRX groupset. Or for that matter, any 12S cassette in the range of 11-38 to 11-40 with GRX groupset and Shimano HG Freehub.
Thanks!!
I just purchased a Canyon Grizl AL 7. It has the 12 speed GRX groupset. My previous bike was the previous Gen Grizl AL 7 with the 11 speed groupset. I was using the Shimano 11S 11-40 cassette on that bike (2X setup 46-30 cranks) and I absolutely Loved my climbing gear with the 11-40 cassette. With the 12S on my new bike it comes with the 11-36 cassette and that’s just not quite enough for the steep gravel roads. I’m wondering if there is anyone here who has used the Rotor 11-39 12S cassette with a 2X Shimano GRX groupset. Or for that matter, any 12S cassette in the range of 11-38 to 11-40 with GRX groupset and Shimano HG Freehub.
Thanks!!
#2
ignominious poltroon
Join Date: Jan 2022
Posts: 4,157
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 2289 Post(s)
Liked 3,518 Times
in
1,849 Posts
I think Canyon put on a 36T because that is the official max T spec for that derailleur, according to Shimano. Given everyone's experience with the 11-speed (which easily handles 40T with a turn of the B-screw), you should be fine. The range on their two 1X 12-speed rear derailleurs is significantly greater (lower), so at worst, you might have to avoid the big-big cross-chain position.
#3
Senior Member
Hmm. I have the GRX 12 speed driveline on my bike, but the GRX system uses MTB gear spacing, meaning I needed to get a Micro Spline free hub for the 12 speed cassette.