!!help Me Find Out How Much This Royce Union Is Worth!!
#1
Newbie
Thread Starter
Join Date: Mar 2006
Posts: 1
Likes: 0
Liked 0 Times
in
0 Posts
!!help Me Find Out How Much This Royce Union Is Worth!!
I recently found a really old looking Royce Union bicycle, and I'm wondering if it's worth anything. It says "Made in Japan anno 1904" and includes a serial #: 6R89321. I called a bike shop and the guy wasn't very helpful, he just told me to google it. That didn't help much..which is why I'm on these forums. The best way to contact me would be via EMAIL: rodriguez.cyn@gmail.com
I appreciate any bit of advice with this. Thanks a bunch!!
I appreciate any bit of advice with this. Thanks a bunch!!
#2
Chrome Freak
Join Date: Dec 2005
Location: Kuna, ID
Posts: 3,208
Bikes: 71 Chrome Paramount P13-9, 73 Opaque Blue Paramount P15, 74 Blue Mink Raleigh Pro, 91 Waterford Paramount, Holland Titanium x2
Likes: 0
Liked 26 Times
in
14 Posts
Royce Union produced cheap bicycles that generally make Huffy look sophisticated. I don't think there is much value there, beyond that of the parts.
I had a R.U. Stingray knockoff when I was a kid. It had long chrome forks that took no time at all to bend outward. I used to straighten them by riding into a wall at a slow speed.
I had a R.U. Stingray knockoff when I was a kid. It had long chrome forks that took no time at all to bend outward. I used to straighten them by riding into a wall at a slow speed.
#3
Senior Member
Pictures of what you are talking about would help us all. As stated , RU was a very low price bike sold in both bike shops and department stores. They were just a cut above department store quality, as seen from independent bike shop view. Just a bike, nothing special at all.
#4
Senior Member
If the Royce Union name has any historical significance, it's because it was the first brand of Japanese bike imported into the U.S. - well before Fuji, Nishiki, etc. In fact, well before the 60's/70's bike boom. As previously mentioned, they were built down to a price point, and almost all were small frames, as it hadn't occurred to that Japanese that American riders were a bit taller. I remember them primarily as cheap copies of Raleigh 3-speed "English racers".
Syke
Deranged Few M/C
Syke
Deranged Few M/C
#5
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,591
Bikes: https://www.theheadbadge.com
Liked 4,525 Times
in
2,137 Posts
The best way to contact me would be via EMAIL: rodriguez.cyn@gmail.com
Mods, can we put a rule up on the forum that if anyone wishes information on their machine, they must participate in the thread they created?
Would likely also cut down on Craigslisters trying to gauge the value of their stuff after having already posted it on C-list.
-Kurt
#6
Avenir Equipped
Join Date: Jul 2006
Posts: 1,146
Bikes: Chesini X-Uno, etc.....
Likes: 0
Liked 0 Times
in
0 Posts
For the most part that brand is kinda junkish. Apart from the cool headbadge not too much to look at. Do you own a boat?
#7
Senior Member
One memorable Xmas my dad bought 3 R-U 10 speeds at the local Gemco. He put them together himself. Getting them to work properly was outside his realm of expertise. After my sisters abandonded them I made one sorta working bike out of the three. Rode it a lot. It required constant fiddling to keep it working. The sharp edge on the cottered crank kept my ankle bone shaved down nicely. I appreciated the Royce-Union. I wouldn't pay much more than $20.00 for one.
Like someone said above, one step above a Huffy of the same vintage.
And beware of any post that starts out "whats it worth?"
Like someone said above, one step above a Huffy of the same vintage.
And beware of any post that starts out "whats it worth?"
#8
Dolce far niente
#9
Senior Member
In the early '70's, maybe, Consumer Reports did a test of about 10 models of entry-level '10-speeds'. The Royce-Union was, if I recall correctly, in a category by itself. "Not Acceptable".
#10
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,591
Bikes: https://www.theheadbadge.com
Liked 4,525 Times
in
2,137 Posts
Here is an later-model R/U - a re-badged Panasonic DX-2000, identical in every respect except for R/U headbadge and lettering. Not a bad machine with UG rear hub, aluminum wheelset, etc. Could have been improved with a better crankset, but overall not bad:
Same frameset as Kevinsubaru's in post #34 here: https://www.bikeforums.net/showthread...=413609&page=2
-Kurt
Same frameset as Kevinsubaru's in post #34 here: https://www.bikeforums.net/showthread...=413609&page=2
-Kurt
Last edited by cudak888; 05-10-08 at 08:32 PM.
#12
Bike Junkie
Join Date: Jun 2005
Location: South of Raleigh, North of New Hill, East of Harris Lake, NC
Posts: 9,625
Bikes: Specialized Tarmac, Specialized Roubaix, Giant OCR-C, Specialized Stumpjumper FSR, Stumpjumper Comp, 88 & 92Nishiki Ariel, 87 Centurion Ironman, 92 Paramount, 84 Nishiki Medalist
Likes: 0
Liked 38 Times
in
28 Posts
I had, or should I say my wife had a Royce Union. It was a 3-speed, step-through frame. Nothing special, but it was very reliable. It was a really nice brown color with chrome fenders.
__________________
Roccobike BF Official Thread Terminator
Roccobike BF Official Thread Terminator
#13
Eater of carbs
Join Date: Aug 2006
Location: Daytona Beach
Posts: 215
Bikes: 1989 Trek 330
Likes: 0
Liked 0 Times
in
0 Posts
This thread is old, but I love telling people about my POS Royce Union.
My first commuter was a 1999 RU mountain bike that I rode while I figured out what kind of bike I was suited to. I ended up "locking out" the front suspension by putting PVC pipes in the suspension tubes. I completely removed the rear suspension and kludged a steel pipe in its place. A set of slicks and a set of tektro brakes helped me go faster and stop better, respectively. I lasted about 8 months on that monstrosity. All of my modifications told me that I would be much more at home on a road bike
It was worth exactly what I paid for it. Nothing. Like all WalMart bikes actually.
My first commuter was a 1999 RU mountain bike that I rode while I figured out what kind of bike I was suited to. I ended up "locking out" the front suspension by putting PVC pipes in the suspension tubes. I completely removed the rear suspension and kludged a steel pipe in its place. A set of slicks and a set of tektro brakes helped me go faster and stop better, respectively. I lasted about 8 months on that monstrosity. All of my modifications told me that I would be much more at home on a road bike
It was worth exactly what I paid for it. Nothing. Like all WalMart bikes actually.
#14
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,591
Bikes: https://www.theheadbadge.com
Liked 4,525 Times
in
2,137 Posts
I just realized that this thread was from '06...and that I am responsible for bumping it
Don't know how though, unless I screwed up the thread order on my system.
-Kurt
P.S.: If nothing else, the fact that the OP never responded after two years makes him eligible for the very first, formal "What Tiz It Worth" d!*khead award.
#15
Title-Les
Join Date: Feb 2007
Posts: 172
Likes: 0
Liked 0 Times
in
0 Posts
GAAAH!
I just realized that this thread was from '06...and that I am responsible for bumping it
>< SCHNIPPEROONY ><
P.S.: If nothing else, the fact that the OP never responded after two years makes him eligible for the very first, formal "What Tiz It Worth" d!*khead award.
I just realized that this thread was from '06...and that I am responsible for bumping it
>< SCHNIPPEROONY ><
P.S.: If nothing else, the fact that the OP never responded after two years makes him eligible for the very first, formal "What Tiz It Worth" d!*khead award.
alf