Ghost shifting remedies?
10-05-09, 06:59 AM
#1
South Carolina Ed
Thread Starter
Join Date: Mar 2007
Location: Greer, SC
Posts: 3,895
Bikes: Holdsworth custom, Macario Pro, Ciocc San Cristobal, Viner Nemo, Cyfac Le Mythique, Giant TCR, Tommasso Mondial, Cyfac Etoile
Liked 296 Times
in
142 Posts
Ghost shifting remedies?
I have a couple of old steel bikes that have problems with ghost shifting. One is a 93 Viner Nemo with late 80's Athena friction shifters and an Athena RD. The other is a more noodley 73 Holdsworth with Suntour Sprint shifters and a Nouvo Record RD. Both ghost shift when I stand on the cranks going up hills. Other than really tightening up the shifter screws, which I don't like the feel of, are there other ways of dealing with the problem? Thanks.
10-05-09, 07:11 AM
#2
Senior Member
Sounds like you're suffering shifting due to frame flex. As you've noticed, increasing the pressure of the shifters' friction plate will solve the problem. Often this is a delicate operation.
Retrofriction/ratchet shifters and indexed shifters are both less susceptible to this problem.
Retrofriction/ratchet shifters and indexed shifters are both less susceptible to this problem.
10-05-09, 07:14 AM
#3
Too many hobbies!
Join Date: Oct 2008
Location: Hanover, PA
Posts: 304
Bikes: Maserati MT-2 (reviewed in Road and Track, 1974; Raleigh Competion GS Carlton; Dawes Super Gallexy; Hollands; Raleigh Professional
Likes: 0
Liked 0 Times
in
0 Posts
Are you sure it isn't chain skip? Does the chain actually shift into another cog?
10-05-09, 09:09 AM
#4
Senior Member
Join Date: Apr 2008
Location: Colorado
Posts: 218
Bikes: Scott Road, Jamis, Tricross,
Likes: 0
Liked 0 Times
in
0 Posts
I had the same problem on an old Fuji Touring series IV, it was like having an automatic transmission. I replaced/upgraded the rear derailleur on the recomendation of my LBS it went away.
10-05-09, 09:37 AM
#5
South Carolina Ed
Thread Starter
Join Date: Mar 2007
Location: Greer, SC
Posts: 3,895
Bikes: Holdsworth custom, Macario Pro, Ciocc San Cristobal, Viner Nemo, Cyfac Le Mythique, Giant TCR, Tommasso Mondial, Cyfac Etoile
Liked 296 Times
in
142 Posts
It does shift onto the next smaller cog. It is due to frame flex. I did grease the shifter components when installing them. Perhaps I should clean all the lubricant off and readjust them. I'd like to avoid a heavy throw on the shifters.
10-05-09, 09:44 AM
#6
Senior Member
Join Date: Jun 2006
Posts: 195
Likes: 0
Liked 0 Times
in
0 Posts
Usually this happens from friction where the derailleur cable is routed around the bottom bracket. When the frame is flexing the cable moves with it. If you reduce the friction in the area, the cable will float and not move with the frame.
Usually a few squirts of chain lube onto the cable where it is routed around the bottom bracket fixes this problem. If that does not work try replacing the cable with a new high quality teflon coated one (don't use cheap ones).
Usually a few squirts of chain lube onto the cable where it is routed around the bottom bracket fixes this problem. If that does not work try replacing the cable with a new high quality teflon coated one (don't use cheap ones).
Last edited by prof2k; 10-05-09 at 09:53 AM.
10-05-09, 10:06 AM
#7
Senior Member
Join Date: Aug 2005
Location: Kentwood michigan.
Posts: 486
Bikes: too many
Likes: 0
Liked 0 Times
in
0 Posts
On one bike I had with the friction problem on the BB, lube kept wearing off so I went with a nylon or delrin (plastic anyway) cable guide from a moountain bike, problem went away for good.
Ken.
Ken.
