Eric F 

I've used my multi-tool (with chain breaker) at least 4 times in the past year. Twice to fix chain issues (I'm done with KMC chains). Once to solve a cleat issue. Once to make seat height adjustments on a new bike.

Koyote

In this context, I have no idea what you're talking about.

I'm betting both times were on an MTB.

I honestly can't recall the last time I needed a multi-tool on a ride, and I've never needed a chainbreaker. But I still carry them all the time -- even when racing. Especially when racing.

Eric F 

Gravel bike. Both times it was transitioning from a downhill to an uphill, and shifting under some load. I've gone back to a Shimano chain on that bike.

SoSmellyAir

Lezyne SV Pro-5 (silver) is around $2 more than its V Pro-5 (black).
The reason I do not carry the latter is that I may not be able to find it when wearing my contact lenses.
The reason chaadster does not carry the latter is that it is not sufficiently aesthetically pleasing.

rsbob 

You have a point. I haven’t used my multi-tool in years and it has considerable heft (must be a paranoid Boy Scout thing)- and with tubeless and no flats in 2.5 years, why do I need to carry CO2 since I always carry a mini-pump as back-up?

Never had a boot slip so will probably skip the glue. I use either a piece of Tyvec or a dollar and don’t care about size (no scissors) because when home, it will all be repaired or swapped out anyway.

Thanks for letting me steal the ideas. Usually BF posts cost me $, so this is a nice change.

BillyD

Speaking of which, you’re late. Need a visit from Tony?

BillyD

Couldn’t resist, it was hanging so low.

terrymorse 

I started gluing on tire boots after the Park boot I had didn't close up the hole. The boot bulged out the hole and quickly wore through. Tube went pop!

The glue helps the boot hold the hole in the tire casing closed. Gorilla tape might work just as well as nylon fabric + glue, but what I have is working okay, and I'd rather not experiment with roadside repairs.

cyclezen

Yikes !
Can't remember the last time I had need for a chain tool, on the road... Certainly not after going to chains with master links... 25 yrs ? ??
and only once, when I mustta not put the sedis chain together properly...
I do carry a red spoke wrench used prolly 2x in the past 4 yrs... Once for me and once for riding bud.
and some reading glasses - thin folding ones... forget finding small things or reading something without them... used almost as often as replacement tubes... LOL!
also contact info & main Med Card/info...
Ride On
Yuri

SoSmellyAir

The BWF 2024 edition bags are on sale with free shipping so I bought both a saddle bag and a compact frame bag.

Koyote

I'll be interested to read your opinions after using them. I'm still very happy with the saddlebag. After switching to a TPU spare tube, that little pack is actually a bit too large(!)

Shadco 

Almsthere seat pack works a treat with plenty of room.




.

SoSmellyAir

I agree that the ALMSTHRE standard saddlebag is a bit too big for what I usually carry on my tubeless gravel bike:
[1] Lezyne SV-Pro 5 multitool (mostly for 5 mm and 6 mm hexes);
[2] Lezyne Control Drive CO2 head;
[3] 16 g CO2 cartridge (in Lezyne sleeve);
[4] DynaPlug Racer Pro; and
[5] Sanitizing wipes (mostly to reduce rattling).
However, I think it would be just about right if I add a couple of tire levers and a TPU tube. As Eric F noted above, it has no compartments, although there is one bottom sleeve / pocket.

I really appreciate the interior design of the Lezyne Micro Caddy (medium) I usually carry for my road bike. In its main compartment, there are two separate sleeves on the left for two individual tire levers and another sleeve on the right for a 16 g CO2 cartridge. The bag also has a bottom outside pocket with a Velcro flap for a multitool. These features add a little weight but keep things organized and reduces rattling.

Sy Reene

Lezyne or Almsthre both look like ripoffs of Arundel bags IMO.

hidetaka

Did Arundel invent a basic black polyester bag attached with a velcro? The only Arundel bag that's similar is their Uno, and that's like wikipedia-stock-image generic design.

Sy Reene

Yes I believe they did -- at least the single strap design. Anyway, take your pick. I forgot to mention the Silca Mattone


Arundel Pico



Alsmthre

Lezyne

Lezyne Road caddy

Silca Mattone

SoSmellyAir

Arundel is oval shaped with a prominent white trim, while Lezyne and Almsthre are rectangular with rounded corners. The plaintiffs' bar must love to have you on a jury.

SoSmellyAir

In that case, the lunch bag my son used in elementary school was also an Arundel ripoff.

zacster

I've been carrying my tubes/tools/patch kits in a saddle bag, two different Topeaks, for 40+ years and you know the only things I've ever used were the tubes of course, and the small multi tool. No chain tool, no spoke wrench, hardly ever even the tire irons. I don't put money, phone, glasses or anything else in it. So a few weeks ago I went and bought TPU tubes to give them a try and they are so small and light I decided I don't need to carry them in a bag, I can just stick them in my jersey pocket, along with my multi tool. I saved a full pound + from my bike between the tubes and taking the bag off. I haven't removed the seat attachment yet but I will at some point. Actually, I just bought one of those Chinese 3d printed saddles so I'll get some weight advantage from that too, unless I can't stand it. Such small things have been bringing decent weight advantages, FWIW. Next up may be carbon bars finally. My stem though will remain my Redshift ShockStop. That is the one thing I've bought that really changed the feel of the ride. I'm not a weight weenie but if I can shave a whole pound just by changing tube types with a $35 investment (for 5 tubes, not each) I'll go for it.

merlinextraligh

I use and like the Lezyne road caddy. I tucks up almost unseen, under the saddle. I put a tube, mini tool, tire lever, tire boot, CO2 and inflator in it. It’s a tight fit with a standard tube. with a TPU tube there’s plenty of space.